Blackscreen (no GUI) after resume from S4 since SVN Rev11685

[MediaTobiPortal]

@Mikou
please post your log, so we can find out if it´s really the same error.
Does PowerScheduler still hibernate your system or is your computer on all the time now ?

@all
(how) Can I switch back to the last working SVN ?
Can I just download it and start the "update" as usual ?
In my case powerscheduler isn´t hibernating my system anymore, is this caused by the error dicussed here ?



Thanks Tobi

[Mikou]

I will add my log later when I'm at home. But yes my machine is still going to standby (S3) and when it wakes up evertyhing else than MediaPortal is working ok. MP is just black screen mode.

But I have also some problems at going to standby because Windows XP hangs every now and then at saving your settings display and I have to boot my machine

[MediaTobiPortal]

Do you send your pc to sleep using PowerScheduler or is standby/hibernate handeled by windows ?

[mrmojo666]

MediaPortal Version: MediaPortal SVN 11832 + TVE3 vers.11832
Windows Version: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp.051011-1528)
CPU Type: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
HDD: 120 +250 sata
Memory: 2x512 ddr2 667 dual channel
Motherboard: ASUS M2NPV-VM
Motherboard Chipset: nvidia 430
Video Card: geforce 6150
Video Card Driver: 93.71
Sound Card: SoundMAX HD Audio O
Sound Card AC3:
Sound Card Driver: 5.10.0001.4151
1. TV Card: hauppauge PVR150
1. TV Card Type: H/w
2. TV Card: technotrend S-1500 budget wioth CI
2. TV Card Type: DVB-s
2. TV Card Driver:4.4.10.17
MPEG2 Video Codec: NVIDIA Video Decoder
MPEG2 Audio Codec: NVIDIA Audio Decoder
Satelite/CableTV Provider: Sky Italia

powerscheduler on
i get black screen after wakeup from powerbutton, and i have to reboot.
Mp goes in hibernation after 3 min as is configured in powerscheduler (is the same if i get using button on main home screen)

here the log

[Mikou]

- I was not able to reproduce this yesterday
- trying again later when I have time
- I have used both way to put PC to standby mode

[SciDoctor]

I get the same error and blank unresponsive MP screen if any OGL or DX app is run while MP is in the systray and then after the app (game, screensaver etc) is ended MP is 'restore'd.

This didn't occur before the svn 11685

The error log continues to grow in an ever ending cycle of the same error as posted by the thread starter.

Ironicaly this is around the same SVN release period that the VRM9 was broken for the MY MUSIC VIDEOS.

[zimboo007]

MediaPortal Version: SVN Rev11844
MediaPortal Skin: Blue Two
Windows Version: Winxp Pro
CPU Type: AMD 3500 x2 EE
HDD: 250GB Samsung
Memory: 1GB
Motherboard: ASrock
Motherboard Chipset: KT890
Motherboard Bios:
Video Card: ATI X1300
Video Card Driver: 6.10
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver:
1. TV Card: Nova SE
1. TV Card Type:
1. TV Card Driver: 24199
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: MPV
MPEG2 Audio Codec: MPA
Satelite/CableTV Provider: 19.2
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection:
I am form German and my Englisch is very bad
If you under basic adjustment the Animationes switch on fold it

[gloomyandy]

Do you guys have "Turn on monitor when retuning from suspend" or whatever that option is called. I had lots of problems with a blank screen after a suspend/resume sometimes using the remotes after the PC had restarted would turn the display on, sometimes not, sometimes after tyhe display was turned on the screen would still be blank. I then enabled the above option and have been fine since....

Andy

[MediaTobiPortal]

@zimboo007
Setting "enable animations" to on doesn´t help in my/our cases...see earlier posts in this thread.

@gloomyandy
I´ll give that a try and report if it works. But I already have enabled this option.. but nobody knows maybe disabling it helps me.....

@mikou
You´re a lucky guy...Until now I can reproduce it as often as I like.

[MediaTobiPortal]

disabling "turn on monitor when resuming" doesn´t help

no changes if option is en- or disabled