MyTV: TV-cards are loosing signal - TESTSCENARIO 1 - Page 7

datanode · 2006-06-17, 22:07

Windows Version: Win XP Pro sp2 (MCE)
CPU Type: Intel Celeron D 330J 2.6 GHz, 533 MHz, Boxed (BX80547RE2667C)
Memory: 2x Kingston ValueRam 512 MB, PC3200, 400 MHz
Motherboard: GigaByte GA-8IPE775G (GA-8IPE775G)
Motherboard Chipset:
Motherboard Bios: Intel 865PE AGPSet BIOS for 8IPE775/-G F7
AWARD BIOS
Video Card: nvidia geforce FX 5200
Video Card Driver: 81.98_forceware_winxpmce_english
Sound Card: Creative Soundblaster Audigy
Sound Card AC3:
Sound Card Driver: Creative 11-4-2003 5.12.1.383
1. TV Card: Hauppauge WinTV PVR 500 MCE (OEM)
1. TV Card Type: analog
1. TV Card Driver: 2.0.35.23348
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider:
HTPC Case: AC Ryan Acrylic Zwart
Power Supply: Enermax EG375AX-VE(G)
Remote: Microsoft Remote Control+Receiver
TV: Philips
TV - HTPC Connection: S-video

:::::::::Testplan Preparations:::::::::

in config -> television set:
----Video Codec Type & Version: MPV filter
----Audio Codec Type & Version: MPA filter

:::::::::Testplan start:::::::::

SVN-Snapshot: 17-06-06

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is | playing
-----Audio is | playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: | no|
-----notes:
I tested with tmeshift on. I also did a fullscreen tv test with TS off, after approx 80 channelswitches in total I experienced stuttering. But after about 5 - 10 seconds on the same channel I got normal playing again.

:::::::::Testplan end:::::::::

imported_mjsystem · 2006-06-18, 19:27

Windows Version: Windows XP SP2
CPU Type: P4 HT 2,6GHz
Memory: 1Go
Motherboard: Asus P4P800
Motherboard Chipset: I865
Motherboard Bios:
Video Card: Radeon 9550
Video Card Driver: Last Radeon
Sound Card: SoundMax
Sound Card AC3: Stereo
Sound Card Driver: The last
1. TV Card: Pinnacle 200i
1. TV Card Type: DVB-T
1. TV Card Driver: 03/12/2004
2. TV Card: Hauppauge PCI Nova-T
2. TV Card Type: DVB-T
2. TV Card Driver: 2.5
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider:
HTPC Case:
Power Supply:
Remote: Hauppauge
TV: DAEWOO
TV - HTPC Connection: Composite

SVN : personnal build 06-17-2006 19:00

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is | playing
-----Audio is | playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: | no|
-----notes: I have got some shuttering but I think it was some problem of reception.
3. Test TimeShift :
-----Picture is | playing
-----Audio is | playing
-----notes: I had got a black picture on the first "pause". After it was OK.

Good !

petteram · 2006-06-21, 17:13

Windows Version: Windows XP SP2 Norwegian
CPU Type: P4 2.8GHz
Memory: 1024
Motherboard: MSI 848P Neo-V
Motherboard Chipset: Intel® 848P
Motherboard Bios:
Video Card: Gigabyte 6600GT silentpipe
Video Card Driver: 84.21
Sound Card: HDA Digital X-Mystique 7.1 Gold
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV-S
1. TV Card Type: Hardvare
1. TV Card Driver: 4.2.0
Video Codec: Nvidia
Audio Codec: Nvidia
Satelite/CableTV Provider: Canal digital/Thor 2/3 at 1.0°W
HTPC Case: Silverstone LC13
Power Supply: Mist 500W
Remote: Microsoft MCE
TV: Fujitsu-Siemens Myrica 32" LCD
TV - HTPC Connection: DVI
SVN-Snapshot: 2006-06-21 1:02

:::::::::Testplan start:::::::::

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is playing
-----Audio is playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: no
-----notes:Lost count of zapping, but picture got black and sond mute after around 20 times.
MP froze at this point and I spent some time to get back to windows.
was actually gonna report about stutter in picture and sound, but this seems to be fixed with latest SVN.
When zapping to a channel that hasnt started broadcasting yet, I would expect
a no signal message, but it doesnt appear any messages at all.
Its looking better for every svn, so if we ever meet I`ll buy you guys a beer :-)

:::::::::Testplan end:::::::::

ziphnor · 2006-06-22, 10:04

Windows Version: Windows XP SP2
CPU Type: AMD Athlon64 3000+(Venice E6)
Memory: 2x256 + 1x512MB DDR400
Motherboard: Asus A8N-E
Motherboard Chipset: Nforce4 Ultra
Motherboard Bios: V. 1013
Video Card: ATI X550
Video Card Driver: ATI 6.3
Sound Card: Onboard
Sound Card AC3:
Sound Card Driver: ?
1. TV Card: Twinhan Cab CI
1. TV Card Type: DVB-C
1. TV Card Driver: BDA 1.2.3.8 WHQL
2. TV Card: Twinhan Cab CI
2. TV Card Type: DVB-C
2. TV Card Driver: BDA 1.2.3.8 WHQL
Video Codec: Intervideo
Audio Codec: Intervideo
Satelite/CableTV Provider: TDC (denmark)
HTPC Case: Custom
Power Supply: 350W noname
Remote: MCE 2005
TV: Phillips 28" PAL CRT
TV - HTPC Connection: VGA->SCART

Just a short remark. Above someone mentioned that running MyTheatre would make their FloppyDTV work again. When MP causes problems with my Twinhan Cab CI (DVB-C) running MyTheatre also solves any problems, they must be doing some kind of reset. Whatever it is, it works and would be nice if MP could do the same.

imported_mjsystem · 2006-06-22, 19:50

Windows Version: Windows XP SP2
CPU Type: P4 HT 2,6GHz
Memory: 1Go
Motherboard: Asus P4P800
Motherboard Chipset: I865
Motherboard Bios:
Video Card: Radeon 9550
Video Card Driver: Last Radeon
Sound Card: SoundMax
Sound Card AC3: Stereo
Sound Card Driver: The last
1. TV Card: Pinnacle 200i
1. TV Card Type: DVB-T
1. TV Card Driver: 03/12/2004
2. TV Card: Hauppauge PCI Nova-T
2. TV Card Type: DVB-T
2. TV Card Driver: 2.5
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider:
HTPC Case:
Power Supply:
Remote: Hauppauge
TV: DAEWOO
TV - HTPC Connection: Composite

SVN : Personnal Build 06-22-2006 19:00 (GMT+1)

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is | playing
-----Audio is | playing
-----notes:
2. switch the TV-Channel (with timeshift) at least 30 times, or until "no signal" message.
-----got "no signal" message: | no|
-----notes: I haven't got shuttering !! Only one black screen on one channel: I changed channel and i went back on this channel and all was OK

good !!

Broceliande · 2006-06-23, 08:10

Well , thanks all for you reports and logs !
Thanks to them MP is getting more stable each day

mjsystem , your black screen was occuring with Canal+ :
22/06/2006 19:11:24 DVBGraphBase : UpdateVideoState() VRM9 Active FPS = 0
Maybe it was still encrypted when you entered it first, as it can occur when a crypted program ( world cup ?) finished later than usually.
This cannot be a signal issue , cause the tuner is locked.

hoppy · 2006-06-24, 09:24

Windows Version: Windows XP Pro SP2
CPU Type: AMD Athlon 64 X2 4400+
Memory: 1GB PC3200 (Kingston)
Motherboard: Shuttle FT20 (proprietary)
Motherboard Chipset: ATi Radeon XPRESS 200 + ULi 1573
Motherboard Bios: FT20S018
Video Card: ATi Radeon X800
Video Card Driver: 8.252.0.0
Sound Card: Realtek High Definiation Audio (Onboard)
Sound Card AC3: Not sure, none I would say.
Sound Card Driver: 5.10.0.5116
1. TV Card: FloppyDTV
1. TV Card Type: DVB-S
1. TV Card Driver: Driver version: BDA 4.2.0
2. TV Card: Twinhan VisionDTV PCI
2. TV Card Type: DVB-T
2. TV Card Driver: 1.2.3.8
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider: Sky (with Dragon CAM) for DVB-S, UK Freeview for DVB-T
HTPC Case: Shuttle ST20G5
Power Supply: Silent X 240W
Remote: FloppyDTV
TV: LG RZ-32LZ55
TV - HTPC Connection: DVI

:::::::::Testplan start:::::::::

info:

SVN-Snapshot: mediaportal-svn-06-24-2006--01-02

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is playing
-----Audio is playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: yes, after first switch
-----notes: I've had real problems with the FloppyDTV after this:

21/06/2006 [20:48:13] dman_LFC Configuration DVB LNB Tone frequency now defaults to 22KHz
21/06/2006 [20:48:31] dman_LFC Configuration LNB Tone is hidden when LNB is not selected
21/06/2006 [21:48:34] dman_LFC TVEngine fixed DiSEqC problems for DVB-S users who have supported cards.

I'll run another test with the SVN from the 20th and see if its better.

:::::::::Testplan end:::::::::

hoppy · 2006-06-24, 09:26

forgot to attach the logs... Here they are...

petteram · 2006-06-24, 09:28

Windows Version: Windows XP SP2 Norwegian
CPU Type: P4 2.8GHz
Memory: 1024
Motherboard: MSI 848P Neo-V
Motherboard Chipset: Intel® 848P
Motherboard Bios:
Video Card: Gigabyte 6600GT silentpipe
Video Card Driver: 91.31 Release Date: June 23, 2006
Sound Card: HDA Digital X-Mystique 7.1 Gold
Sound Card AC3:
Sound Card Driver:
1. TV Card: FloppyDTV-S
1. TV Card Type: Hardvare
1. TV Card Driver: 4.2.0
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider: Canal digital/Thor 2/3 at 1.0°W
HTPC Case: Silverstone LC13
Power Supply: Mist 500W
Remote: Microsoft MCE
TV: Fujitsu-Siemens Myrica 32" LCD
TV - HTPC Connection: DVI
SVN-Snapshot: 2006-06-23 20:04
FloppyDTV Firmware: 1-1-1-B23850

:::::::::Testplan start:::::::::

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is playing
-----Audio is playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: Yes, a lot.
I am using the SVN from 06-17 because all SVN after this date just dont work for me.

hoppy · 2006-06-24, 09:36

Windows Version: Windows XP Pro SP2
CPU Type: AMD Athlon 64 X2 4400+
Memory: 1GB PC3200 (Kingston)
Motherboard: Shuttle FT20 (proprietary)
Motherboard Chipset: ATi Radeon XPRESS 200 + ULi 1573
Motherboard Bios: FT20S018
Video Card: ATi Radeon X800
Video Card Driver: 8.252.0.0
Sound Card: Realtek High Definiation Audio (Onboard)
Sound Card AC3: Not sure, none I would say.
Sound Card Driver: 5.10.0.5116
1. TV Card: FloppyDTV
1. TV Card Type: DVB-S
1. TV Card Driver: Driver version: BDA 4.2.0
2. TV Card: Twinhan VisionDTV PCI
2. TV Card Type: DVB-T
2. TV Card Driver: 1.2.3.8
Video Codec: MPV
Audio Codec: MPA
Satelite/CableTV Provider: Sky (with Dragon CAM) for DVB-S, UK Freeview for DVB-T
HTPC Case: Shuttle ST20G5
Power Supply: Silent X 240W
Remote: FloppyDTV
TV: LG RZ-32LZ55
TV - HTPC Connection: DVI

:::::::::Testplan start:::::::::

info:

SVN-Snapshot: mediaportal-svn-06-20-2006--22-14

1. Start MediaPortal, go to MyTV and tune any tv-channel:
-----Picture is playing
-----Audio is |playing
-----notes:
2. switch the TV-Channel at least 30 times, or until "no signal" message.
-----got "no signal" message: yes, after switch #12
-----notes: This time the no signal message was on a DVB-T tunner which is very unusual. I've never seen this before, its always been a floppyDTV channel before. This SVN is much better than the latest one though, I get no signal with almost every zap with the latest SVN.

:::::::::Testplan end:::::::::

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Autotune doesn't find any channels	friedit	Installation, configuration support	2	2007-01-02 14:34
KNC 1 DVB-C / cannot tune channels	lutz	General Support	15	2006-10-01 12:04
no channels with KNC1 c+	oli2011	General Support	1	2006-08-15 11:40
Nova-t USB2	sim1964	General Support	2	2006-06-24 11:03
Hauppauge HVR-1300: Problem with digital/analouge channel	Bev83	General Support	9	2006-06-01 13:39

2006-06-17, 22:07	#61 (permalink)
datanode Portal Member Join Date: May 2005 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Windows Version: Win XP Pro sp2 (MCE) CPU Type: Intel Celeron D 330J 2.6 GHz, 533 MHz, Boxed (BX80547RE2667C) Memory: 2x Kingston ValueRam 512 MB, PC3200, 400 MHz Motherboard: GigaByte GA-8IPE775G (GA-8IPE775G) Motherboard Chipset: Motherboard Bios: Intel 865PE AGPSet BIOS for 8IPE775/-G F7 AWARD BIOS Video Card: nvidia geforce FX 5200 Video Card Driver: 81.98_forceware_winxpmce_english Sound Card: Creative Soundblaster Audigy Sound Card AC3: Sound Card Driver: Creative 11-4-2003 5.12.1.383 1. TV Card: Hauppauge WinTV PVR 500 MCE (OEM) 1. TV Card Type: analog 1. TV Card Driver: 2.0.35.23348 2. TV Card: 2. TV Card Type: 2. TV Card Driver: Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: HTPC Case: AC Ryan Acrylic Zwart Power Supply: Enermax EG375AX-VE(G) Remote: Microsoft Remote Control+Receiver TV: Philips TV - HTPC Connection: S-video :::::::::Testplan Preparations::::::::: in config -> television set: ----Video Codec Type & Version: MPV filter ----Audio Codec Type & Version: MPA filter :::::::::Testplan start::::::::: SVN-Snapshot: 17-06-06 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is \| playing -----Audio is \| playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: \| no\| -----notes: I tested with tmeshift on. I also did a fullscreen tv test with TS off, after approx 80 channelswitches in total I experienced stuttering. But after about 5 - 10 seconds on the same channel I got normal playing again. :::::::::Testplan end:::::::::

2006-06-18, 19:27	#62 (permalink)
imported_mjsystem Portal Member Join Date: Nov 2005 Age: 37 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Windows Version: Windows XP SP2 CPU Type: P4 HT 2,6GHz Memory: 1Go Motherboard: Asus P4P800 Motherboard Chipset: I865 Motherboard Bios: Video Card: Radeon 9550 Video Card Driver: Last Radeon Sound Card: SoundMax Sound Card AC3: Stereo Sound Card Driver: The last 1. TV Card: Pinnacle 200i 1. TV Card Type: DVB-T 1. TV Card Driver: 03/12/2004 2. TV Card: Hauppauge PCI Nova-T 2. TV Card Type: DVB-T 2. TV Card Driver: 2.5 Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: HTPC Case: Power Supply: Remote: Hauppauge TV: DAEWOO TV - HTPC Connection: Composite SVN : personnal build 06-17-2006 19:00 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is \| playing -----Audio is \| playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: \| no\| -----notes: I have got some shuttering but I think it was some problem of reception. 3. Test TimeShift : -----Picture is \| playing -----Audio is \| playing -----notes: I had got a black picture on the first "pause". After it was OK. Good !

2006-06-21, 17:13	#63 (permalink)
petteram Portal Member Join Date: Nov 2005 Location: Norway Age: 44 Posts: 191 Thanks: 0 Thanked 0 Times in 0 Posts	Windows Version: Windows XP SP2 Norwegian CPU Type: P4 2.8GHz Memory: 1024 Motherboard: MSI 848P Neo-V Motherboard Chipset: Intel® 848P Motherboard Bios: Video Card: Gigabyte 6600GT silentpipe Video Card Driver: 84.21 Sound Card: HDA Digital X-Mystique 7.1 Gold Sound Card AC3: Sound Card Driver: 1. TV Card: FloppyDTV-S 1. TV Card Type: Hardvare 1. TV Card Driver: 4.2.0 Video Codec: Nvidia Audio Codec: Nvidia Satelite/CableTV Provider: Canal digital/Thor 2/3 at 1.0°W HTPC Case: Silverstone LC13 Power Supply: Mist 500W Remote: Microsoft MCE TV: Fujitsu-Siemens Myrica 32" LCD TV - HTPC Connection: DVI SVN-Snapshot: 2006-06-21 1:02 :::::::::Testplan start::::::::: 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is playing -----Audio is playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: no -----notes:Lost count of zapping, but picture got black and sond mute after around 20 times. MP froze at this point and I spent some time to get back to windows. was actually gonna report about stutter in picture and sound, but this seems to be fixed with latest SVN. When zapping to a channel that hasnt started broadcasting yet, I would expect a no signal message, but it doesnt appear any messages at all. Its looking better for every svn, so if we ever meet I`ll buy you guys a beer :-) :::::::::Testplan end:::::::::

2006-06-22, 10:04	#64 (permalink)
ziphnor Portal Developer Join Date: Aug 2005 Location: Copenhagen Age: 29 Posts: 727 Thanks: 0 Thanked 9 Times in 6 Posts Country: My System	Windows Version: Windows XP SP2 CPU Type: AMD Athlon64 3000+(Venice E6) Memory: 2x256 + 1x512MB DDR400 Motherboard: Asus A8N-E Motherboard Chipset: Nforce4 Ultra Motherboard Bios: V. 1013 Video Card: ATI X550 Video Card Driver: ATI 6.3 Sound Card: Onboard Sound Card AC3: Sound Card Driver: ? 1. TV Card: Twinhan Cab CI 1. TV Card Type: DVB-C 1. TV Card Driver: BDA 1.2.3.8 WHQL 2. TV Card: Twinhan Cab CI 2. TV Card Type: DVB-C 2. TV Card Driver: BDA 1.2.3.8 WHQL Video Codec: Intervideo Audio Codec: Intervideo Satelite/CableTV Provider: TDC (denmark) HTPC Case: Custom Power Supply: 350W noname Remote: MCE 2005 TV: Phillips 28" PAL CRT TV - HTPC Connection: VGA->SCART Just a short remark. Above someone mentioned that running MyTheatre would make their FloppyDTV work again. When MP causes problems with my Twinhan Cab CI (DVB-C) running MyTheatre also solves any problems, they must be doing some kind of reset. Whatever it is, it works and would be nice if MP could do the same.

2006-06-22, 19:50	#65 (permalink)
imported_mjsystem Portal Member Join Date: Nov 2005 Age: 37 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Windows Version: Windows XP SP2 CPU Type: P4 HT 2,6GHz Memory: 1Go Motherboard: Asus P4P800 Motherboard Chipset: I865 Motherboard Bios: Video Card: Radeon 9550 Video Card Driver: Last Radeon Sound Card: SoundMax Sound Card AC3: Stereo Sound Card Driver: The last 1. TV Card: Pinnacle 200i 1. TV Card Type: DVB-T 1. TV Card Driver: 03/12/2004 2. TV Card: Hauppauge PCI Nova-T 2. TV Card Type: DVB-T 2. TV Card Driver: 2.5 Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: HTPC Case: Power Supply: Remote: Hauppauge TV: DAEWOO TV - HTPC Connection: Composite SVN : Personnal Build 06-22-2006 19:00 (GMT+1) 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is \| playing -----Audio is \| playing -----notes: 2. switch the TV-Channel (with timeshift) at least 30 times, or until "no signal" message. -----got "no signal" message: \| no\| -----notes: I haven't got shuttering !! Only one black screen on one channel: I changed channel and i went back on this channel and all was OK good !!

2006-06-23, 08:10	#66 (permalink)
Broceliande Portal Developer Join Date: Apr 2006 Posts: 199 Thanks: 0 Thanked 2 Times in 2 Posts	Well , thanks all for you reports and logs ! Thanks to them MP is getting more stable each day mjsystem , your black screen was occuring with Canal+ : 22/06/2006 19:11:24 DVBGraphBase : UpdateVideoState() VRM9 Active FPS = 0 Maybe it was still encrypted when you entered it first, as it can occur when a crypted program ( world cup ?) finished later than usually. This cannot be a signal issue , cause the tuner is locked.

2006-06-24, 09:24	#67 (permalink)
hoppy Portal Member Join Date: Mar 2006 Location: Cambridge, UK Posts: 79 Thanks: 3 Thanked 0 Times in 0 Posts	Windows Version: Windows XP Pro SP2 CPU Type: AMD Athlon 64 X2 4400+ Memory: 1GB PC3200 (Kingston) Motherboard: Shuttle FT20 (proprietary) Motherboard Chipset: ATi Radeon XPRESS 200 + ULi 1573 Motherboard Bios: FT20S018 Video Card: ATi Radeon X800 Video Card Driver: 8.252.0.0 Sound Card: Realtek High Definiation Audio (Onboard) Sound Card AC3: Not sure, none I would say. Sound Card Driver: 5.10.0.5116 1. TV Card: FloppyDTV 1. TV Card Type: DVB-S 1. TV Card Driver: Driver version: BDA 4.2.0 2. TV Card: Twinhan VisionDTV PCI 2. TV Card Type: DVB-T 2. TV Card Driver: 1.2.3.8 Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: Sky (with Dragon CAM) for DVB-S, UK Freeview for DVB-T HTPC Case: Shuttle ST20G5 Power Supply: Silent X 240W Remote: FloppyDTV TV: LG RZ-32LZ55 TV - HTPC Connection: DVI :::::::::Testplan start::::::::: info: SVN-Snapshot: mediaportal-svn-06-24-2006--01-02 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is playing -----Audio is playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: yes, after first switch -----notes: I've had real problems with the FloppyDTV after this: 21/06/2006 [20:48:13] dman_LFC Configuration DVB LNB Tone frequency now defaults to 22KHz 21/06/2006 [20:48:31] dman_LFC Configuration LNB Tone is hidden when LNB is not selected 21/06/2006 [21:48:34] dman_LFC TVEngine fixed DiSEqC problems for DVB-S users who have supported cards. I'll run another test with the SVN from the 20th and see if its better. :::::::::Testplan end:::::::::

2006-06-24, 09:26	#68 (permalink)
hoppy Portal Member Join Date: Mar 2006 Location: Cambridge, UK Posts: 79 Thanks: 3 Thanked 0 Times in 0 Posts	forgot to attach the logs... Here they are...

2006-06-24, 09:28	#69 (permalink)
petteram Portal Member Join Date: Nov 2005 Location: Norway Age: 44 Posts: 191 Thanks: 0 Thanked 0 Times in 0 Posts	Windows Version: Windows XP SP2 Norwegian CPU Type: P4 2.8GHz Memory: 1024 Motherboard: MSI 848P Neo-V Motherboard Chipset: Intel® 848P Motherboard Bios: Video Card: Gigabyte 6600GT silentpipe Video Card Driver: 91.31 Release Date: June 23, 2006 Sound Card: HDA Digital X-Mystique 7.1 Gold Sound Card AC3: Sound Card Driver: 1. TV Card: FloppyDTV-S 1. TV Card Type: Hardvare 1. TV Card Driver: 4.2.0 Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: Canal digital/Thor 2/3 at 1.0°W HTPC Case: Silverstone LC13 Power Supply: Mist 500W Remote: Microsoft MCE TV: Fujitsu-Siemens Myrica 32" LCD TV - HTPC Connection: DVI SVN-Snapshot: 2006-06-23 20:04 FloppyDTV Firmware: 1-1-1-B23850 :::::::::Testplan start::::::::: 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is playing -----Audio is playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: Yes, a lot. I am using the SVN from 06-17 because all SVN after this date just dont work for me.

2006-06-24, 09:36	#70 (permalink)
hoppy Portal Member Join Date: Mar 2006 Location: Cambridge, UK Posts: 79 Thanks: 3 Thanked 0 Times in 0 Posts	Windows Version: Windows XP Pro SP2 CPU Type: AMD Athlon 64 X2 4400+ Memory: 1GB PC3200 (Kingston) Motherboard: Shuttle FT20 (proprietary) Motherboard Chipset: ATi Radeon XPRESS 200 + ULi 1573 Motherboard Bios: FT20S018 Video Card: ATi Radeon X800 Video Card Driver: 8.252.0.0 Sound Card: Realtek High Definiation Audio (Onboard) Sound Card AC3: Not sure, none I would say. Sound Card Driver: 5.10.0.5116 1. TV Card: FloppyDTV 1. TV Card Type: DVB-S 1. TV Card Driver: Driver version: BDA 4.2.0 2. TV Card: Twinhan VisionDTV PCI 2. TV Card Type: DVB-T 2. TV Card Driver: 1.2.3.8 Video Codec: MPV Audio Codec: MPA Satelite/CableTV Provider: Sky (with Dragon CAM) for DVB-S, UK Freeview for DVB-T HTPC Case: Shuttle ST20G5 Power Supply: Silent X 240W Remote: FloppyDTV TV: LG RZ-32LZ55 TV - HTPC Connection: DVI :::::::::Testplan start::::::::: info: SVN-Snapshot: mediaportal-svn-06-20-2006--22-14 1. Start MediaPortal, go to MyTV and tune any tv-channel: -----Picture is playing -----Audio is \|playing -----notes: 2. switch the TV-Channel at least 30 times, or until "no signal" message. -----got "no signal" message: yes, after switch #12 -----notes: This time the no signal message was on a DVB-T tunner which is very unusual. I've never seen this before, its always been a floppyDTV channel before. This SVN is much better than the latest one though, I get no signal with almost every zap with the latest SVN. :::::::::Testplan end:::::::::