Version 0.2.0.0 Beta - Page 3

Symphy · 2008-05-24, 17:25

Quote:

Originally Posted by kenwonders

This is a very specific request, rather than the norm, it really shouldn't get coded into anything except as an option. EDIT: Sorry that sounded crappy, I meant to say 'maybe'

At least the value of 120 should be variable, but all 5.1 and 7.1 setups include a LFE, so it's not that far off the norm

I'd say there should be VST plugins available for multichannel upmixing. However the plugin currently does not support VST's with diferent number of input/output channels, and that may become a problem. Might be worth looking into.

Quote:

Originally Posted by kenwonders

Symphy, any more thoughts on the possibility of adding FFDSHOW audio? This would solve a lot of configurable issues like the above, plus give all the wonders of EQ, resampling, mixing etc.

Problem is, there is currently no proper way to combine Directshow stuff with BASS audio... at least not that i know of.

Symphy

sique · 2008-05-25, 01:36

Quote:

Originally Posted by Olaf

Quote:

Originally Posted by Symphy

What exactly do you want to do with it? As it is now the LFE channel is simply feeded with a full-range left/right mix.
Do you want to cut away frequencies above 120 Hz or so?

Yes! I would like :

to remove the frequencies below 120Hz on right / left channels
to send only these frequencies towards the LFE

Quote:

Originally Posted by Symphy

VST plugins should have accesss to all output channels. What kind of outputdevice are you using
Note that upmixing only works when using a 5.1 or 7.1 outputdevice, not when directly steering S/PDIF! The latter would require a AC3 or DTS encoder, which is not present.
I'm not sure what situation applies to you, a logfile will make things clear.

I use (in 5.1) the analogical outputs of Terratec Aureon firewire 7.1.
I am going to take out a logfile...

Thank you for your help!
Regards,

In Foobar2000 I use foo_dsp_xover to obtain this (foo_dsp_xover), maybe it's possible to add support for foobar2000 plugins?

Or maybe there's already a VST-plugin that can do the same?

kenwonders · 2008-05-26, 17:44

Quote:

Originally Posted by Symphy

Problem is, there is currently no proper way to combine Directshow stuff with BASS audio... at least not that i know of.

Symphy

Sorry mate, I just remembered I had already bugged you about this...

anvandarnamn · 2008-05-28, 20:04

hi !

thanks for a great plugin!

I only have one problem, one kind of irritating,,,

I have a g35 motherboard connected through hdmi to my receiver, using vista i have selected 7.1 speakers. Everything works like a charm, but when i am using this audio plugin the board still outputs 7.1 channels, i would like it to output 2channels only... (need that to decode HDCDs and play bitperfect...)

If i select only 2channels in vista audio settings, it does exactly what i want , but then i need to change it back to 7.1 when watching movies...
is there any way to have the plugin to take exclusive control over the audio device and only send as many channels of sound as the source i am playing has...

i have tried both asio and windows device, both of them sends 7.1 lpcm to the receiver (only 2 channels active though)

Thanks!

Best Regards
Daniel

iolaus · 2008-06-29, 06:02

Quote:

Originally Posted by Symphy

Cool! We just beat BASS

Quote:

Originally Posted by phunqe

Did I mention:

You make me blush phunqe!

Quote:

Originally Posted by sdf

...what about implementing Wasapi?...

As soon as i have a Vista development environment available here, i'll look into it. But i'm afraid that's not gonna happen real soon.

Regards,
Symphy

Anything we could do to help out on this front? Perhaps donations are in order? I'd be very excited for WASAPI exclusive mode in Media Portal.

Symphy · 2008-07-05, 21:54

Everyone,
Sorry i have been absent for the last 5 weeks or so... been quite busy with things other then MP. The good news is my vacation has started, so i'll try to answer all new posts and release 2.0.0 final in the next few days.

Symphy

anvandarnamn · 2008-07-06, 20:39

Quote:

Originally Posted by anvandarnamn

hi !

thanks for a great plugin!

I only have one problem, one kind of irritating,,,

I have a g35 motherboard connected through hdmi to my receiver, using vista i have selected 7.1 speakers. Everything works like a charm, but when i am using this audio plugin the board still outputs 7.1 channels, i would like it to output 2channels only... (need that to decode HDCDs and play bitperfect...)

If i select only 2channels in vista audio settings, it does exactly what i want , but then i need to change it back to 7.1 when watching movies...
is there any way to have the plugin to take exclusive control over the audio device and only send as many channels of sound as the source i am playing has...

i have tried both asio and windows device, both of them sends 7.1 lpcm to the receiver (only 2 channels active though)

Thanks!

Best Regards
Daniel

Quote:

Originally Posted by iolaus

Anything we could do to help out on this front? Perhaps donations are in order? I'd be very excited for WASAPI exclusive mode in Media Portal.

seems like the answer to my problems is WASAPI . When using the latest version of the foobar2000 player and its Wasapi-plugin it takes exclusive control over the sound and outputs as many cannels as the source at the correct samplerate. To bad the foobar plugin for mediaportal doesnt work with this version....
So...

, Symphy, what about implementing WASAPI support?

as said before, maybe donations are in order?

Nice to see that you are back symphy! was a bit worried that you had left us..

thanks for a great plugin!

Symphy · 2008-07-06, 22:34

Quote:

Originally Posted by anvandarnamn

seems like the answer to my problems is WASAPI . When using the latest version of the foobar2000 player and its Wasapi-plugin it takes exclusive control over the sound and outputs as many cannels as the source at the correct samplerate. To bad the foobar plugin for mediaportal doesnt work with this version....
So...

, Symphy, what about implementing WASAPI support?

as said before, maybe donations are in order?

Nice to see that you are back symphy! was a bit worried that you had left us..

thanks for a great plugin!

WASAPI is slowly surrounding me... WHAA!!

But seriously. I cannot promise anything yet on new major features. Why that is you'll findout soon. (No worries, i won't be leaving this project

)

Symphy

Roeben · 2008-07-19, 12:24

Hi Symphy,

Thanks for your efforts in PureAudio. It's an incredible plugin!
I do still have the following issue on Vista as mentionned in this topic:

MP crashes if using ASIO with all SVN's since 17453

Is there any news around a possible fix?

Thanks!

trevor · 2008-07-19, 12:42

Quote:

Originally Posted by Roeben

Hi Symphy,

Thanks for your efforts in PureAudio. It's an incredible plugin!
I do still have the following issue on Vista as mentionned in this topic:

MP crashes if using ASIO with all SVN's since 17453

Is there any news around a possible fix?

Thanks!

Are you using the PureAudio.mpi from the 1st post in this thread?

I had that problem originallyand the MPI version in the reporistry (0.1.3.0) still causes that. The 'Version 0.2.0.0 Beta' on the 1st post is what I currently use and all works like a charm. Have to get the ASIO4ALL config right but have not troubles...

Trevor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wo kann ich sehen, welche installierte MP Version / SVN Version ist ?	duk64	Media Portal - Allgemeines	6	2007-10-01 19:47
iPodSync Beta	Flipit	Plugins	6	2006-11-12 16:55
Releasing a non-MSI version for version 2.0	arnonm	General Development (no feature request here!)	2	2005-10-17 20:24
myPrograms 0.2 beta is here!	waeberd	Plugins	64	2005-07-04 21:09
myPrograms: new version for beta-testing!	waeberd	Plugins	27	2004-11-15 14:23

2008-05-28, 20:04	#24 (permalink)
anvandarnamn Portal Member Join Date: Feb 2007 Age: 24 Posts: 29 Thanks: 0 Thanked 0 Times in 0 Posts Country:	hi ! thanks for a great plugin! I only have one problem, one kind of irritating,,, I have a g35 motherboard connected through hdmi to my receiver, using vista i have selected 7.1 speakers. Everything works like a charm, but when i am using this audio plugin the board still outputs 7.1 channels, i would like it to output 2channels only... (need that to decode HDCDs and play bitperfect...) If i select only 2channels in vista audio settings, it does exactly what i want , but then i need to change it back to 7.1 when watching movies... is there any way to have the plugin to take exclusive control over the audio device and only send as many channels of sound as the source i am playing has... i have tried both asio and windows device, both of them sends 7.1 lpcm to the receiver (only 2 channels active though) Thanks! Best Regards Daniel

2008-07-05, 21:54	#26 (permalink)
Symphy Portal Developer Join Date: Aug 2007 Age: 40 Posts: 216 Thanks: 0 Thanked 20 Times in 15 Posts Country:	Everyone, Sorry i have been absent for the last 5 weeks or so... been quite busy with things other then MP. The good news is my vacation has started, so i'll try to answer all new posts and release 2.0.0 final in the next few days. Symphy

2008-07-19, 12:24	#29 (permalink)
Roeben Portal Member Join Date: Mar 2008 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi Symphy, Thanks for your efforts in PureAudio. It's an incredible plugin! I do still have the following issue on Vista as mentionned in this topic: MP crashes if using ASIO with all SVN's since 17453 Is there any news around a possible fix? Thanks!