ffdshow for Mediaportal

mamachan · 2007-04-18, 18:32

The best version of ffdshow codec for Mediaportal is always this??
http://www.team-mediaportal.com/file...OW-2004-10-12/

Thanks.
massimo

FlipGer · 2007-04-18, 21:13

Hi,

personally I would recommend the ffdshow-tryouts:
http://ffdshow-tryout.sourceforge.net/

They have fixed many bugs and tweaked the overall performance. Its working on my machine without flaws.

We did recommend the old version because of problems getting postprocessing to work. But these problems were solved with the MP 0.2.2.0 release.

HTH,
Flip.

mamachan · 2007-04-18, 22:13

Thanks.

hi.
massimo

mamachan · 2007-04-19, 09:03

Quote:

Originally Posted by FlipGer

Hi,

personally I would recommend the ffdshow-tryouts:
http://ffdshow-tryout.sourceforge.net/

They have fixed many bugs and tweaked the overall performance. Its working on my machine without flaws.

We did recommend the old version because of problems getting postprocessing to work. But these problems were solved with the MP 0.2.2.0 release.

HTH,
Flip.

I installed this wersion of ffdshow. It work fine but not with postprocessing setting
http://www.projecthtpc.co.uk/software3.html
I try with purevideo codec, MPA an Dscaler but don't work (ffdshow start and the postprocessing too but the video is corrupt).

I can try somethings??
Hi,
massimo

FlipGer · 2007-04-19, 22:13

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

mamachan · 2007-04-20, 08:57

Quote:

Originally Posted by FlipGer

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

Thanks,
hi will try with this settings.
Hi
massimo

mamachan · 2007-04-20, 15:46

Quote:

Originally Posted by mamachan

Quote:

Originally Posted by FlipGer

Hi,

imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported".

Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo.

Please use graphedit to check if all filters are set up correctly.

HTH,
Flip.

Thanks,
hi will try with this settings.
Hi
massimo

Sorry but don't work, ffdshow start but video is corrupt

FlipGer · 2007-04-20, 23:20

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

mamachan · 2007-04-21, 09:04

Quote:

Originally Posted by FlipGer

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

Hi, FlipGer
If i turn off all processing in ffdshow, it work fine but ONLY with divx/xvid/mpeg4/mpeg2 file, NOT with DVD (i use a resize 1366x768 in ffdshow, can be this the problem?).
I'm not be able to use graphedit

My HW:
Asus P5B Deluxe/Wifi AP
Intel Core 2 Duo E6400
Ram 2x512 533mhz dual channel
Asus 7600GS fanless 256mb
TVcard TT S2-3200
TVcard Jepssen Hybrid (like Hauppauge 1100)
Seasonic 430w
S/O: WinXP MCE 2005 rollup2

I will post a screenshot.

Thanks
Hi
massimo

mamachan · 2007-04-27, 14:35

Quote:

Originally Posted by FlipGer

Hi,

could you please make a screenshot?
Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another.

Try using graphedit->connect to remote graph to check if the correct filters are used.

Please fill out the support template. What hardware do you use?

Flip.

Hi FlipGer,
this are the screenshot:

Thanks
massimo

2007-04-18, 18:32	#1 (permalink)
mamachan MP Donator Join Date: Sep 2006 Posts: 256 Thanks: 3 Thanked 2 Times in 2 Posts Country:	ffdshow for Mediaportal The best version of ffdshow codec for Mediaportal is always this?? http://www.team-mediaportal.com/file...OW-2004-10-12/ Thanks. massimo

2007-04-19, 22:13	#5 (permalink)
FlipGer Super Moderator Join Date: Apr 2004 Location: Leipzig, Germany Age: 33 Posts: 2,282 Thanks: 33 Thanked 55 Times in 41 Posts Country: My System	Hi, imho these settings are not 100% correct. You do not need to add "ffdshow raw video filter" and "ffdshow Video Decoder" to postprocessing. It should be enough to add only "ffdshow raw video filter". After adding this filter hit "Filter properties". As you can see these are somewhat different settings, than the ones shown in the guide. Choose "Codec" and set "all supported". Be aware, that the ffdshow raw filter does not connect to MPA. I have it working with PureVideo. Please use graphedit to check if all filters are set up correctly. HTH, Flip. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is the difference between ffdshow and ffdshow tryouts?	coopers	Codecs, External Players	4	2007-03-18 03:09
How to get FFDshow working?	jcee	General Support	8	2006-08-23 08:35
FFDSHOW and MP TV?	superloopy	Codecs, External Players	3	2006-07-30 18:24
best version of ffdshow?	nst6563	Codecs, External Players	9	2006-03-07 04:27
ffdshow presets	gabbe	Improvement Suggestions	2	2004-09-30 07:09

2007-04-18, 21:13	#2 (permalink)
FlipGer Super Moderator Join Date: Apr 2004 Location: Leipzig, Germany Age: 33 Posts: 2,282 Thanks: 33 Thanked 55 Times in 41 Posts Country: My System	Hi, personally I would recommend the ffdshow-tryouts: http://ffdshow-tryout.sourceforge.net/ They have fixed many bugs and tweaked the overall performance. Its working on my machine without flaws. We did recommend the old version because of problems getting postprocessing to work. But these problems were solved with the MP 0.2.2.0 release. HTH, Flip.

2007-04-18, 22:13	#3 (permalink)
mamachan MP Donator Join Date: Sep 2006 Posts: 256 Thanks: 3 Thanked 2 Times in 2 Posts Country:	Thanks. hi. massimo

2007-04-20, 23:20	#8 (permalink)
FlipGer Super Moderator Join Date: Apr 2004 Location: Leipzig, Germany Age: 33 Posts: 2,282 Thanks: 33 Thanked 55 Times in 41 Posts Country: My System	Hi, could you please make a screenshot? Also try to turn of all processing in ffdshow besides the OSD. Still crappy picture? If not, try turning on on section by another. Try using graphedit->connect to remote graph to check if the correct filters are used. Please fill out the support template. What hardware do you use? Flip.