My 'Little' HTPC project - Page 3

Deco · 2005-12-19, 09:23

Quote:

Originally Posted by bigal

I bought mine for 90 â‚¬, but it is worth it! it has top quality

I can send a mail to them and ask if there is an english version

/BigAl

Thanks BigAl!

Deco.

fathead · 2005-12-19, 09:44

Excellent work Bigal, finally someone using the LC02!

Question, how much clearance room is there for a larger heatsink in the case? I was hoping to do a similar project, but use a Zalman 7000Cu.

I also planned to buy the silverstone RC02 PCI-E riser card, so I could use the Terratec Cinergy 2400 card.

bigal · 2005-12-19, 16:31

Quote:

Originally Posted by fathead

Question, how much clearance room is there for a larger heatsink in the case? I was hoping to do a similar project, but use a Zalman 7000Cu.

I also planned to buy the silverstone RC02 PCI-E riser card, so I could use the Terratec Cinergy 2400 card.

I don't think that a larger heatsink will fit without modification, you will lost the slimline place... my standard AMD fan/sink is quiet as hell!

The raisercard will work if the port is in it's the right place on the motherboard

/BigAl

fathead · 2005-12-20, 10:07

Quote:

Originally Posted by bigal

Quote:

Originally Posted by fathead

Question, how much clearance room is there for a larger heatsink in the case? I was hoping to do a similar project, but use a Zalman 7000Cu.

I also planned to buy the silverstone RC02 PCI-E riser card, so I could use the Terratec Cinergy 2400 card.

I don't think that a larger heatsink will fit without modification, you will lost the slimline place... my standard AMD fan/sink is quiet as hell!

The raisercard will work if the port is in it's the right place on the motherboard

/BigAl

When you say it won't fit, do you mean it won't fit height wise or width wise?

As for the riser card, would it work for you on your board? If so the PCI-E version will work on mine as its the same layout.

bigal · 2005-12-20, 14:45

A raisercard for PCIe 1x should work on the setup I got, yes

About the fen, i think the height is about 6cm, the heatsink you are talking about is round? i think it to not fit on that way ether check my fotos and make som calculations =)

/BigAl

Visuaguy · 2005-12-20, 15:38

About the keyboard;
Is there a partnumber on the back of the keyboard? maybe we can trace that to the original manufacterer ( I am in holland and saw a keyboard like that once. cannot find it anymore though)

bigal · 2005-12-20, 16:16

Quote:

Originally Posted by Visuaguy

About the keyboard;
Is there a partnumber on the back of the keyboard? maybe we can trace that to the original manufacterer ( I am in holland and saw a keyboard like that once. cannot find it anymore though)

It is made in Austia so i think it may exict in more layouts then the nordic's.

Model# 5515 SE
Art.Nr# 3106-516

/BigAl

fathead · 2005-12-20, 16:27

bigal, which PCI slot are you using with the riser in your setup? Would the AGP riser fit your setup?

bigal · 2005-12-21, 05:47

Quote:

Originally Posted by fathead

bigal, which PCI slot are you using with the riser in your setup? Would the AGP riser fit your setup?

There is no AGP in my setup, but there is agp and pci raisers that comes with the chassi.

I use a Cable-PCI-Extender that is flexible

/BigAl

Visuaguy · 2005-12-21, 10:57

Quote:

Originally Posted by Deco

Quote:

Originally Posted by bigal

The keyboard is great! it can control the TV to, yes =)
It says that it is made in Austria on the backside so it may excit in many languages
/BigAl

IMHO if these guys bring out an English version, they're onto a winner!! Price may need some work though (seems to sell for â‚¬100 !)

Deco.

I found out through amitech.dk that the manufacturer is ruwido (http://www.ruwido.com/en/products_oem_standard_08.htm) and it is called the livingroom keyboard..

in holland i could find a reseller for it, and i asked them if they can deliver this keyboard too.
good luck finding one in your own country!

search for it on google

2005-12-20, 14:45	#25 (permalink)
bigal Portal Member Join Date: Sep 2005 Location: Gothenburg Posts: 159 Thanks: 0 Thanked 0 Times in 0 Posts	A raisercard for PCIe 1x should work on the setup I got, yes About the fen, i think the height is about 6cm, the heatsink you are talking about is round? i think it to not fit on that way ether check my fotos and make som calculations =) /BigAl __________________ ::Chassi:: Silverstone LC02 ::Mainboard:: MSI RS482M4-ILD :rocessor:: AMD 64 3200+ 'Venice' ::Memory:: 1024MB PC3200 ::HDD:: 300GB SATA

2005-12-20, 15:38	#26 (permalink)
Visuaguy Portal Member Join Date: Oct 2005 Location: Haarlem, the netherlands Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	About the keyboard; Is there a partnumber on the back of the keyboard? maybe we can trace that to the original manufacterer ( I am in holland and saw a keyboard like that once. cannot find it anymore though) __________________ ::Home made Chassis:::AMD Athlon 64 3200:::asus a8nvm CSM:: ::1024MB twinmos:::250 GB Samsung spinpoint:::128x64 blue white lcd:: ::plextor 716ALL-Slot-in:::FloppyDTV DVB-T-(new)::

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A perfect HTPC with MP & PVR Scheduler & faster XP	STSC	Tips and Tricks	16	2007-01-30 22:40
The Top Reasons why Media Portal is the Greatest HTPC App	Steve Warner	MediaPortal 1 Talk	37	2006-08-02 02:00
Want to finish my HTPC project - but how?	BugsBunny	MediaPortal 1 Talk	0	2006-06-01 23:12
MY HTPC Project	morbog	Ongoing HTPC Projects	4	2006-04-11 13:08
HTPC project from Sweden	Anonymous	Ongoing HTPC Projects	4	2004-12-18 05:14

2005-12-19, 09:44	#22 (permalink)
fathead Portal Member Join Date: Mar 2005 Posts: 211 Thanks: 0 Thanked 0 Times in 0 Posts	Excellent work Bigal, finally someone using the LC02! Question, how much clearance room is there for a larger heatsink in the case? I was hoping to do a similar project, but use a Zalman 7000Cu. I also planned to buy the silverstone RC02 PCI-E riser card, so I could use the Terratec Cinergy 2400 card.

2005-12-20, 16:27	#28 (permalink)
fathead Portal Member Join Date: Mar 2005 Posts: 211 Thanks: 0 Thanked 0 Times in 0 Posts	bigal, which PCI slot are you using with the riser in your setup? Would the AGP riser fit your setup?