[PATCH] Improvements for analog cards - Page 6

misterd · 2008-01-26, 15:29

It should work up to revision 17149. If you don't need the fix of gemx in revision 17150, the patch should also work up to 17158.
I will build a new version, when dman has successfully upgraded the directshowlib to 2.0.

MisterD

Edit: New version is for revision 17180 is available at first post.

Spragleknas · 2008-01-27, 21:29

***missed the edit above

****

Edit: Might as well write something here, so:

Installed latest patch + SVN 17180 (for MP0.2.3+TVE3). Got db-error message when trying to run patch, but all was fine after starting TVE3 setup one time.

Misses watching TV now, and all looks good (or should I say; I notice no change....)

<---- My system....

misterd · 2008-01-27, 22:12

The db error is a small problem, because the installer loads the db configuration file of TvServer. If you haven't configured TvServer before applying this patch, the installer can't load this settings.

If everything was working before, you shouldn't notice much difference when applying this patch. It mainly effects software encoding cards, but there are also changes for hardware encoding cards.

Thanks for testing.

MisterD

Spragleknas · 2008-01-27, 22:22

NP.
Is there anything in particular you would like me to report back?

misterd · 2008-01-28, 19:34

If everything is working fro you like before, I don't need any special feedback from you. I only need logs when something isn't working for you etc.

MisterD

EvilDude · 2008-02-02, 11:58

Hey misterd, I tried out this build as you recommended. Unfortunately, still the same, no audio/video detected. Here are my logs:
http://www.prashantv.com/tv-logs.zip

misterd · 2008-02-02, 14:03

Hi EvilDude,
hve you other encoders than the InterVideo installed? All supported encoder are listed under General settings->Software Encoders in SetupTv. You should try all installed encoders, because some cards are only working with a specific encoder. Therefor you only have to change the priority of the encoders.

MisterD

EvilDude · 2008-02-03, 01:17

Ah thanks for that! I tried a couple of encoders on the system, they didn't work, so I installed the Cyberlink encoder and it works now! Thanks for all your help, and I hope this patch makes it into SVN.

chemelli · 2008-02-10, 18:42

Quote:

Originally Posted by EvilDude

Ah thanks for that! I tried a couple of encoders on the system, they didn't work, so I installed the Cyberlink encoder and it works now! Thanks for all your help, and I hope this patch makes it into SVN.

EvilDude,

what version of Cyberlink encoder are you using ? Have you got a link for a trial download ?

Simone

EvilDude · 2008-02-10, 21:49

I am currently using PowerCinema 5, you can get the trial here:
Digital Home TV Entertainment Software - CyberLink PowerCinema

2008-01-26, 15:29	#51 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	It should work up to revision 17149. If you don't need the fix of gemx in revision 17150, the patch should also work up to 17158. I will build a new version, when dman has successfully upgraded the directshowlib to 2.0. MisterD Edit: New version is for revision 17180 is available at first post. Last edited by misterd; 2008-01-27 at 11:33.

2008-01-27, 21:29	#52 (permalink)
Spragleknas Super Moderator Join Date: Dec 2005 Location: Rogaland Age: 32 Posts: 3,976 Thanks: 194 Thanked 106 Times in 86 Posts Country: My System	*missed the edit above ** Edit: Might as well write something here, so: Installed latest patch + SVN 17180 (for MP0.2.3+TVE3). Got db-error message when trying to run patch, but all was fine after starting TVE3 setup one time. Misses watching TV now, and all looks good (or should I say; I notice no change....) <---- My system.... __________________ Please read -> HOW TO START A SUPPORT THREAD !!! Support MediaPortal! Donate by clicking HERE Dedicated HTPC board (Norway) -> MSPC.no My Christmas skin 2008 (widescreen) Last edited by Spragleknas; 2008-01-27 at 21:47.

2008-01-27, 22:22	#54 (permalink)
Spragleknas Super Moderator Join Date: Dec 2005 Location: Rogaland Age: 32 Posts: 3,976 Thanks: 194 Thanked 106 Times in 86 Posts Country: My System	NP. Is there anything in particular you would like me to report back? __________________ Please read -> HOW TO START A SUPPORT THREAD !!! Support MediaPortal! Donate by clicking HERE Dedicated HTPC board (Norway) -> MSPC.no My Christmas skin 2008 (widescreen)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problems with several HW-encoding analog tuner cards	pbb	Development	3	2007-11-07 14:07
Are hardware-encoding analog cards supported?	pbb	Get Support	18	2007-07-01 22:16
Analog Channels Patch Italy!!!	fenomeno83	General Support	0	2006-10-17 02:17
Which analog capture cards does the mediaportal team use?	Richthofen	Hardware Selection Help	5	2006-09-08 22:41
[Patch] MultiTuner Bug with different PVR cards	FlipGer	General Development (no feature request here!)	12	2006-01-06 08:21

2008-01-27, 22:12	#53 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	The db error is a small problem, because the installer loads the db configuration file of TvServer. If you haven't configured TvServer before applying this patch, the installer can't load this settings. If everything was working before, you shouldn't notice much difference when applying this patch. It mainly effects software encoding cards, but there are also changes for hardware encoding cards. Thanks for testing. MisterD

2008-01-28, 19:34	#55 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	If everything is working fro you like before, I don't need any special feedback from you. I only need logs when something isn't working for you etc. MisterD

2008-02-02, 11:58	#56 (permalink)
EvilDude Portal Member Join Date: Feb 2008 Posts: 32 Thanks: 0 Thanked 3 Times in 3 Posts Country:	Hey misterd, I tried out this build as you recommended. Unfortunately, still the same, no audio/video detected. Here are my logs: http://www.prashantv.com/tv-logs.zip

2008-02-02, 14:03	#57 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	Hi EvilDude, hve you other encoders than the InterVideo installed? All supported encoder are listed under General settings->Software Encoders in SetupTv. You should try all installed encoders, because some cards are only working with a specific encoder. Therefor you only have to change the priority of the encoders. MisterD

2008-02-03, 01:17	#58 (permalink)
EvilDude Portal Member Join Date: Feb 2008 Posts: 32 Thanks: 0 Thanked 3 Times in 3 Posts Country:	Ah thanks for that! I tried a couple of encoders on the system, they didn't work, so I installed the Cyberlink encoder and it works now! Thanks for all your help, and I hope this patch makes it into SVN.

2008-02-10, 21:49	#60 (permalink)
EvilDude Portal Member Join Date: Feb 2008 Posts: 32 Thanks: 0 Thanked 3 Times in 3 Posts Country:	I am currently using PowerCinema 5, you can get the trial here: Digital Home TV Entertainment Software - CyberLink PowerCinema