Test bugfix for HVR-4000 and HVR-2200 analog part - Page 2

ronilse · 2008-09-17, 16:59

Hi,
Update:
Was some .ax files from hauppauge that needed to be re-registred(SoftPVR_Update), so it works fine now with HVR-4000, TV-Server & Vista x64 which i have tested here, nice work misterd!!

Regards
Roy

Gix · 2008-09-17, 17:54

The Analog part works fine now!

Thanks MisterD.

misterd · 2008-09-17, 23:20

It is now in SVN and will be available with the next public build.

MisterD

Beetlebum · 2008-09-18, 11:31

I can also confirm that scanning for analogue channels with hvr-4000 is now working, but I'm seeing some strange behaviour when trying to preview or view the channels after setting up.

I will wait for the "proper" SVN to be released, and probably extract some more logs for someone to look through again.

gthoren · 2008-09-19, 20:58

It worked for me. HVR-1100 analouge

Donr · 2008-09-29, 06:34

I still can't get the analogue working. I am using the svn from the 20/09 and your patch but still no joy. I can preview the channels with sound but in MP itself it doesn't work. Digital is perfect. I have attached my logs any help would be appreciated

misterd · 2008-09-29, 22:04

The patch is already included in SVN so you shouldn't apply it anymore to your installation.

When the problem only occurs in MP and the preview is working than you should try first different decoders in MP.

MisterD

Donr · 2008-09-30, 00:36

I have just tried to use PCM MPEG Muxer and PCM H.264/AVC decoders but still won't work, any more ideas or what decoder is best. Thank you for your help.

misterd · 2008-09-30, 19:48

You could try MPV and the M$ decoder, if you are using Vista. Otherwise I have no ideas what could be your problem. I can't see any problems in your TvServer logs, so I assume that the problem must be on the MP side.

MisterD

slarve · 2008-10-19, 14:03

is the analog part in HVR4000 working in RC3? Cause I can't find any channels..

2008-10-19, 14:03	#20 (permalink)
slarve Portal Member Join Date: Jul 2007 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts	Working in RC3 is the analog part in HVR4000 working in RC3? Cause I can't find any channels..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HVR-4000 problem with analog TV	dmkbox	General Support	11	2008-11-03 21:47
TVServer service crashes on analog tuning with Hauppauge HVR-2200	janm	1.0 RC2 and SVN Builds	19	2008-09-15 00:27
Analog Support for HVR-2200	mcraenz	Get Support	12	2008-09-07 14:03
No Analog with Hauppauge HVR 4000	Flapoly	1.0 RC1 and SVN Builds	14	2008-09-07 13:55
Poor video quality on analog TV with HVR 4000	kronwerk	General Support	1	2008-04-15 18:09

2008-09-17, 16:59	#11 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,394 Thanks: 23 Thanked 99 Times in 84 Posts Country: My System	Hi, Update: Was some .ax files from hauppauge that needed to be re-registred(SoftPVR_Update), so it works fine now with HVR-4000, TV-Server & Vista x64 which i have tested here, nice work misterd!! Regards Roy

2008-09-17, 17:54	#12 (permalink)
Gix Portal Member Join Date: Apr 2007 Posts: 56 Thanks: 2 Thanked 0 Times in 0 Posts Country: My System	The Analog part works fine now! Thanks MisterD.

2008-09-17, 23:20	#13 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	It is now in SVN and will be available with the next public build. MisterD

2008-09-18, 11:31	#14 (permalink)
Beetlebum Portal User Join Date: Sep 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I can also confirm that scanning for analogue channels with hvr-4000 is now working, but I'm seeing some strange behaviour when trying to preview or view the channels after setting up. I will wait for the "proper" SVN to be released, and probably extract some more logs for someone to look through again.

2008-09-19, 20:58	#15 (permalink)
gthoren Portal User Join Date: Sep 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	It worked for me. HVR-1100 analouge

2008-09-29, 22:04	#17 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	The patch is already included in SVN so you shouldn't apply it anymore to your installation. When the problem only occurs in MP and the preview is working than you should try first different decoders in MP. MisterD

2008-09-30, 00:36	#18 (permalink)
Donr Portal User Join Date: Aug 2008 Location: Auckland Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	I have just tried to use PCM MPEG Muxer and PCM H.264/AVC decoders but still won't work, any more ideas or what decoder is best. Thank you for your help.

2008-09-30, 19:48	#19 (permalink)
misterd Portal Developer Join Date: Apr 2006 Posts: 1,137 Thanks: 27 Thanked 38 Times in 26 Posts Country:	You could try MPV and the M$ decoder, if you are using Vista. Otherwise I have no ideas what could be your problem. I can't see any problems in your TvServer logs, so I assume that the problem must be on the MP side. MisterD