Post problems you have when using MediaPortal,
or pre installation questions in here.
- Locked
- Sticky
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your post!
Useful Wiki information:
Known Issues
Troubleshooting
FAQ
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
When you start a Support-thread, please make sure your System Specs are filled in (and up-to-date) and you include logs with your...
It downloads and unzips fine for me. Maybe try a different browser or unzip program.
[edit: PeaZip is what I'm using.]
It downloads and unzips fine for me. Maybe try a different browser or unzip program.
[edit: PeaZip is what I'm using.]
What is the purpose of this patch?
Note: This patch is required by MediaPortal for all analog and digital TV Cards in XP (as...
Could it be because the tuner was in use in another application?
Good luck with whatever other software you try.
For anyone else reading this in future:
It is better to start a thread -->here<-- than revive such an old thread.
Post your log files as per the instructions -->here<-- so we have the information we need to be able to...
Could it be because the tuner was in use in another application?
Good luck with whatever other software you try.
For anyone else...
EVERYONE WITH ATSC CARDS: If you can get your card to autotune, Please disable EPG. Doing this has allowed me to use a VBox DTA-150...
I had the freezing problem only with older drivers but i dont know with which...
with 9.11 legacy and 10.2 legacy i had only the unable to play error caused by the /3GB switch in boot.ini
now there are no freezing problems. (with win xp, 10.2 legacy without ccc, only driver but i think with ccc there are no problems too, saf500 codec)
I had the freezing problem only with older drivers but i dont know with which...
with 9.11 legacy and 10.2 legacy i had only the...
TV-Server Version:
MediaPortal Version: 0.2.3.0 RC2 and RC3
MediaPortal Skin: BleTwo/default
Windows Version: WinXP MCE 2005...
- Locked
We no longer support the embedded TV functions of MediaPortal.
TVServer is the currently developed solution.
Setup Information can be found here:
http://wiki.team-mediaportal.com/TV-Engine_0.3
Latest version can be found here:
https://forum.team-mediaportal.com/untested_nightly_builds-f197.html
Use this in conjunction...
We no longer support the embedded TV functions of MediaPortal.
TVServer is the currently developed solution.
Setup...
Getting MediaPortal to support your tv-card:
First check the list below if your tv-card is already supported .
An updated...
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile selection. The TS file name is hidden when RTSC is used.
Looks very interesting solution: FFDSHOW logoaway feature is easier to configure based on a file name for the automatic profile...
===================================================================
EDIT: The modifications in this thread are now included in MP...
This thread has my .imo file for mediaportal as well as instructions, the thread is quite old.
MediaPortal - Setup guide for Silverstone LC16M Case | iMon Remote Setup, iMon VFD Setup, iMon Front Button Hack
Here is the setup i use
I also since remapped the App Launch button to launch mediaportal, that way if MP looses focus...
This thread has my .imo file for mediaportal as well as instructions, the thread is quite old.
MediaPortal - Setup guide for...
Area: Remote configuration
MP Version: 1.3
Windows Version: XP ProSP2
CPU Type: AMD Sempron 3000
Memory: 512Mb
Motherboard...
you can try firefox :)
http://www.mozilla.com/
you can try firefox :)
http://www.mozilla.com/
//edit
xxx ATTENTION xxx
new WIKI: Supported TVCards
//edit
With the arrival of the new TV engine, I have created a...
Hyper threading is same as multicore from the driver / software point of view when it comes to thread scheduling.
Hyper threading is same as multicore from the driver / software point of view when it comes to thread scheduling.
TV-Server Version: TVE 3 latest SVN (usually)
MediaPortal Version: 0.2.3.0 latest SVN (usually)
MediaPortal Skin: BlueTwo...
Oh brother - I can confirm that ;):D;)
Oh brother - I can confirm that ;):D;)
Hi all!
Since the installation of the falls creators update of win10 i have a big problem:
Whenever i start a video file (h264...
hey ppl :)
mkv works fine for me since 2-3 months
installed:
win7 codec pack
win 7 64bit codec pack
2 month old version of ffdshow
it started to play every mkv i had listed
sometimes when i jumped to a special point, it showed up with some huge pixels until the next keyframe was found
i think everyone knows the mkv pixel blur...
hey ppl :)
mkv works fine for me since 2-3 months
installed:
win7 codec pack
win 7 64bit codec pack
2 month old version of...
Lately the calls for help regarding playback of .mkv-files are catching in quite often, so I decided to make a short tutorial/FAQ...
-MediaPortal Version: 0.2.3.0 RC1 (MediaPortal SVN-Snapshot: 07-01-2007 18-04h)
-Windows Version: XP SP2
-CPU Type: Intel Core2Duo E6600
-Video Card: NVIDIA GF 8800GTS 320Mb
-Remote: Twinhan standard remote
-TV Card: Twinhan DVB-C Cab-CI Mantis (2033)
-TV Card Driver: BDA Driver v1.0.2.4 (from twinhan)
-CAM: Conax Cam V 5.0...
-MediaPortal Version: 0.2.3.0 RC1 (MediaPortal SVN-Snapshot: 07-01-2007 18-04h)
-Windows Version: XP SP2
-CPU Type: Intel...
Please post your working or non-working MediaPortal Twinhan CI configurations for others to see...
also please tell us if the...
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources) over to a new Ryzen 3 - based server this weekend. I'll give this a try when I get to my Colossus 2 - which won't be until tomorrow at this rate. Thanks for the heads-up!
Very cool! I'm actually in the middle of migrating my whole MediaPortal system (complete with 5 tuner cards and different sources)...
Ever since my family upgraded to HD dish I've been trying to get our media PC to record the playback. I am currently just...
The encoder package is at the moment available on
tingy.pw
if anyone is still looking for it.
The encoder package is at the moment available on
tingy.pw
if anyone is still looking for it.
I extracted/modified the MainConcept (Hauppauge) MPEG2-Encoder Files for the use with ALL Software-Encoder based cards (ALL Brands...
- Locked
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal.
Use the 6.6 encoder package as this is not as restrictive as the 6.8 ; I have both installed on my system and run MMC9.15 and MP.
Run the 6.6 encoder instal twice and force the modify settings for all options again on the...
For some reason the ATI installer isn't accepting your cards ASIC as elligible for the encoder instal.
Use the 6.6 encoder...
Hi - I worked with a chap in the US (RichardTV) with an AIW 9800 Pro card in an attempt to get it working with the MPEG-2 TV engine...
- Locked
As many of you would have notice after 0.2.0 RC2 software encoding card support has been removed.
One of the main reasons was there were alot of problems with it but most of all we wanted to have a common recording & timeshifting method to maintain for Analogue cards.
With this in mind we have changed strategy which some will...
As many of you would have notice after 0.2.0 RC2 software encoding card support has been removed.
One of the main reasons was...
As many of you would have notice after 0.2.0 RC2 software encoding card support has been removed.
One of the main reasons was...
Hi,
Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box. Check out the Tips and Tricks forum for the location of the newer dlls that MS has only released for MCE (thereby trying to stop any rival products).
chewbacka, I think the 777 card should work. It's...
Hi,
Twirrim, Are you running XP or MCE? XP will not run dual DVT cards without some tweaking. MCE will do it out of the box...
Has anybody managed to use MP with this card?
With what version of MP and Aver software?
I just keep getting errors and I would...
Scusate ragazzi dove posso reperire il software in oggetto?
grazie anticipatamente
Scusate ragazzi dove posso reperire il software in oggetto?
grazie anticipatamente
Salve a tutti.
Visto gli ultimi eventi legati all'EPG di Sky sono corso ai ripari.
In allegato trovate un programmino che scarica...
To be very clear, I mean that you should not access the subtitles via this context menu:
Actions Menu
Instead, try to access the subtitles through the teletext (videotext) button like this:
Teletext
...then enter the subtitle page number (seems to be 954).
To be very clear, I mean that you should not access the subtitles via this context menu:
Actions Menu
Instead, try to access the...
I can change the font size on Video subtitle but not for TV, where is the setting?
We are using Teletext subtitle in Australia...
but if time shifting is not needed, future MP2 server could allow any player to stream selected channel through http.
that app also could Play to selected TV(y)
but if time shifting is not needed, future MP2 server could allow any player to stream selected channel through http.
that app...
Hi, I'm a very happy user of mediaportal and I currently use it to serve TV around the home to various PC's and Laptops.
However...
Thanks for posting this how-to!! it worked for me and allowed me to see that Windows 7 was overriding my decoder choices in MP and was able to fix my video stuttering problem!!
Thanks again!!!
Garen
Thanks for posting this how-to!! it worked for me and allowed me to see that Windows 7 was overriding my decoder choices in MP and...
i am having an issue several others seem to be having and thats 720p playback studders/judders not exactly sure what word is...
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see
http://wiki.team-mediaportal.com/1_MEDIAPORTAL_1/13_Setup_Guides/2_TV_Setup/4_TV_Guide_Setup_(EPG)/XMLTV_mc2xml
I added a little Schedules Direct setup info to the mc2xml/xmltv setup guide, see...
I'm evaluating MP1.6 as a replacement for SageTV (I'm still wrestling with getting usable program guide data to schedule...
yah as do i ... whats the difference ?
yah as do i ... whats the difference ?
I wrote a simple plug-In for ATI remote wonder.
It will send keyboard command to the main MP window when it's active.
Mapped...
No I didn't try 2Gb but it seems that everyone having this problem, has 4 Gb or more in his computer. It wouldn't be the first time that a driver is actually made for 64-bit OS'es, but internally has some 32-bit datatypes (or one 32-bit datatype will suffice to crash te system) due to a clumsy port.
The MSI driver seems to work so...
No I didn't try 2Gb but it seems that everyone having this problem, has 4 Gb or more in his computer. It wouldn't be the first time...
Hi everybody.
I'll try to explain how to make these devices work in MP because I spent so much time trying and sure, I'll help...
I have a pretty bad issue with the drivers for this stick. I actually have a Hama stick, but it's identical to the freecom, yakumo and eurostick.. the problem is this, for both the BDA and the WDM drivers:
the first time I install the driver, it works fine and does the double install (detects another device after installing the...
I have a pretty bad issue with the drivers for this stick. I actually have a Hama stick, but it's identical to the freecom, yakumo...
As a complete novice at this, I'd like to know if anyone can share their experience of using MediaPortal in conjunction with the...
Maybe you have already tried this, but you want MP to handle the control of mounting and unmounting. So, in Daemon Tools, go to Preferences|General and uncheck "Autostart", which is checked by default.
Maybe you have already tried this, but you want MP to handle the control of mounting and unmounting. So, in Daemon Tools, go to...
Hello all,
I am unable to use Daemon Tools to mount images and would like to use Virtual Clone Drive (from within MP). Is this...
Nice one Seb I will give this a go tonight
Nice one Seb I will give this a go tonight
MediaPortal Version: 1.2 RC
MediaPortal Skin: StreamedMP 1.6.6
Windows Version: Windows 7 Ultimate x64 SP1
CPU Type: Intel Core...
Re: Dinovo mini remap key
Hi there!
I really like this solution. I'm running a german version of MP. I installed the US version of your AHK script. The back-key works, but i can't get the volume keys to work.
Any idea on this? The button description in the script should be the same as in the english version i think.
Another issue i...
Re: Dinovo mini remap key
Hi there!
I really like this solution. I'm running a german version of MP. I installed the US version...
Hi I just got a diNovoMini keyboard.. Is a BT device, VERY NICE DEVICE!! :-)
The back button is not working as well as the "Next...
Take a look here : Convert your Windows Server 2008 R2 to a Workstation! - eHome IR Transceiver ;)
Take a look here : Convert your Windows Server 2008 R2 to a Workstation! - eHome IR Transceiver ;)
I am using Windows Server 2008 Standard Edition 64 and I am wondering how to get the Microsoft EHOME Infrared Receiver working. If...
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN.
I notice also that some people are having issues with the hauppuage cards not scanning etc. I have a novaT-500 and the NovaS2 installed with a dish and 4LNB's so i will be sure to check that out and give any help/feedback i can :)
Regards
Kev
Thanks for the head up. I was aware of this and i will use the latest 1.1.0 Alpha + latest SVN.
I notice also that some people are...
Well I Installed Windows 7 Beta on a a new Partition. I really like it only problem is I tried to install Media Portal and it says...
Correct - it was deemed a re-work, and only bug fixes were allowed at the time.
The TsReader here - https://forum.team-mediaportal.com/780079-post59.html - has all patches to date.....
Tony
Correct - it was deemed a re-work, and only bug fixes were allowed at the time.
The TsReader here -...
I hve just upgraded to RC3 and have noticed that there is a audio/video sync problem when watching live TV. The audio is delayed...