General Support (192 Viewers)

Post problems you have when using MediaPortal, or pre installation questions in here.
@doskabouter That fixed it, thanks!
@doskabouter That fixed it, thanks!
I just upgraded to 1.32 and now, when I start TV-Service Config, I get this error: [2024-01-31 09:33:13,138] [Log ] [SetupTv...
Replies
2
Views
474
  • Locked
If you are having problems with MPAR, re-download and reinstall Mediaportal 1.31 Final.
If you are having problems with MPAR, re-download and reinstall Mediaportal 1.31 Final.
I updated MP from 1.30 to 1.31 and noticed some volume differences through my AVR and went investigating. IN MP Config, loading...
Replies
3
Views
1K
HD terrestrial TV in the UK supports both interlaced and progressive modes. My Sony TV's info screen identifies what mode is currently being received, and I was astonished to observe that the video datastream can switch rapidly between interlaced and progressive, even within single advertisement! :eek: I am glad that you were able...
HD terrestrial TV in the UK supports both interlaced and progressive modes. My Sony TV's info screen identifies what mode is...
Hi I have the strangest problem. On two different downloaded video files, my MP crashes and restarts right after the programme...
Replies
3
Views
2K
OK, so I took a deep dive in the logs myself (gotta start to learn sometime) and noticed an error about Gentle.config Opened the file and it was full of NULLs. Not good for an XML file. I found an old thread (gentle.config) which had some 11-years-old XML. On the off-chance that this could fix my problem, I cut-and-pasted it into...
OK, so I took a deep dive in the logs myself (gotta start to learn sometime) and noticed an error about Gentle.config Opened the...
It never rains but it pours. All of a sudden MP1 refuses to connect to the TV service (which is on the same PC) and comes up with...
Replies
1
Views
2K
Thanks @CyberSimian! I delved deeper into this issue and especially the "Silent Stream Bug" you mentioned. I downloaded different pieces of software that claimed to do like you said: keeping the DA-convertors "alive" by sending a non-audible signal periodically. Turned out this was NOT the thing happening in my AV-receiver. While...
Thanks @CyberSimian! I delved deeper into this issue and especially the "Silent Stream Bug" you mentioned. I downloaded different...
I'm having a strange one here ... it seems to have started after getting a new Sony 4k TV, and manifests itself by refusing to...
Replies
9
Views
4K
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan is running. (y) However, since I'm not only using my PC for MediaPortal, I'd like to leave Windows handling the power modes - respecting MediaPortal actions like watching TV or recording. I'd really...
Update: With the "PowerScheduler forces system to go to standby when idle" option Windows goes to Standby mode even while EPG scan...
Although this post is very old, the problem still or again is existing. As long as EPG runs, Windows Standby mode is prevented...
Replies
47
Views
8K
Hello to all, as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention, apparently my music database had a problem. So I deleted (rename) and recreated the database, as I have a lot of tracks in my collection (+/- 90000 songs) I hate do do this because it's very longer but...
Hello to all, as requested by doskabouter I created the log and before posting it, I went through and one line caught my attention...
Hello to all I have been using MP for many years and my system had become +/- unstable, it was time to refresh it. So I...
Replies
4
Views
2K
Hi @joecrow, Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27 and hurrah I've set up the TV side of things and live TV and recordings are working. Thank you and @joEhSuper for your help, I really do appreciate it, now I just need to set up all the plugins again :-)
Hi @joecrow, Thank you, I did uninstall MYSQL, LAV and deleted the respective folders in ProgramData, then re-installed MP1.27...
After a short break away from Mediaportal, I installed MP1.27 and have the TV Server on a different computer to the client. I...
Replies
5
Views
1K
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
Ops. I disabled the Skin Translations plugin. That's all it was. :ROFLMAO:
So I was stripping away some unused plugins from Mediaportal. Not sure exactly what change caused it exactly, but now instead of...
Replies
1
Views
845
MP1 MP2 [solved] MP1 crashes repeatedly (1 Viewer) DE
Withdrawing this question as I've decided to change hardware. Thanks anyway for your help.
Withdrawing this question as I've decided to change hardware. Thanks anyway for your help.
Hi there, I've been using MP1 for a few years without issues. In December I bought a new TBS card (6910) with CI interface. I...
Replies
3
Views
1K
Today I did send a reminder to DD, since 09-2020 no news from them about new drivers. 3.0.2.211 x64 seems to work for me to, but DD told me, those where beta drivers, and some cards did have problems with them. Here you can find stable older drivers, Digital Devices Store But 3.0.3.224 did not work for me, so the latest stable...
Today I did send a reminder to DD, since 09-2020 no news from them about new drivers. 3.0.2.211 x64 seems to work for me to, but...
I recently upgraded my somewhat ancient 1.16 installation to the latest version, 1.25, and have a couple of problems, but the most...
Replies
16
Views
6K
I just found this: On the German page of the PCTV application (only on the German page and not on the driver pages :rolleyes:): TVC 6.4.8 Download (pctvsystems.com) My English translation: I didn't test it because I already switched to another TV card (so I found this piece of information to late) but maybe this can help others...
I just found this: On the German page of the PCTV application (only on the German page and not on the driver pages :rolleyes:)...
Hello Yesterday, I updated my computer running MediaPortal Client and TVServer (and also occasionally providing another laptop...
Replies
13
Views
5K
Hi Entdecker I also have an LG BD drive (HLDT-ST) and yes is is also loud, both seeking and sometimes from I think when the motor is revved up and can stay on loud high speed for a while, with both DVDs and BDs. In contrast the Pioneer one on me desktop is almost noiseless.
Hi Entdecker I also have an LG BD drive (HLDT-ST) and yes is is also loud, both seeking and sometimes from I think when the motor...
I have a recently purchased DVD that won't play on my htpc. It seems to load ok but the screen just shows a short red strip on a...
Replies
11
Views
4K
i did this change, i hope it's OK MP1-5039: Update SharpLibHID to 1.4.4 & SharpLibWin32 to 0.2.2 + Fix … · MediaPortal/MediaPortal-1@48551bb
i did this change, i hope it's OK MP1-5039: Update SharpLibHID to 1.4.4 & SharpLibWin32 to 0.2.2 + Fix … ·...
Dear experts, :) I use a remote control for common playback actions (play/pause, next track, previous track). It works fine but...
Replies
16
Views
4K
@ultimatejoe If you could post an export file with your TV channels and radio stations, I can try adding the logos to LogoManager.
@ultimatejoe If you could post an export file with your TV channels and radio stations, I can try adding the logos to LogoManager.
MediaPortal is crashing on startup. This problem started yesterday; I hadn't made any changes to the software, installed any...
Replies
10
Views
4K
Hi all, quick update. No crashes since undertaking the changes recommended by AJS. Thanks again for the assist.
Hi all, quick update. No crashes since undertaking the changes recommended by AJS. Thanks again for the assist.
Hi I have been using MP without any major issues for many years but my install has just started behaving badly. I was running MP1...
Replies
5
Views
2K
You know that friend of mine, Fox Mulder, he really had something there. I have learned today that 'Trust no one' should not include just people but also control panels. They lie too. Really. A bug in my IPTV provider's web system didn't allow more than one stream even if the control panel said otherwise. Unfortunately, it can't be...
You know that friend of mine, Fox Mulder, he really had something there. I have learned today that 'Trust no one' should not...
I currently have a setup with no physical TV cards present, just two virtual IPTV cards. Both cards are working. However, the...
Replies
6
Views
2K
Done: https://forum.team-mediaportal.com/threads/start-current-music-track-from-the-beginning.139882
Done: https://forum.team-mediaportal.com/threads/start-current-music-track-from-the-beginning.139882
When a track is played and the skip backward key is pressed, MediaPortal plays the previous music track on the playlist. Is it...
Replies
13
Views
3K
If there are no mistakes for others, we add in 1.25 Pre or in the Final.
If there are no mistakes for others, we add in 1.25 Pre or in the Final.
Hi, Catavolt. I use your skin as a reference for analyzing errors in my own skin. One nuance appeared in all skins when replacing...
Replies
22
Views
5K
MP1 MP2 [solved] Music playback hangs (1 Viewer) DE
To anyone else who encounters the issue that the MediaPortal playback hangs and the I've found the rout cause for the "[ERROR] - BASS: GCHandle of Musicstream not found in Dictionary" is logged: On some of my files the Xing header was included in the audio frame count: Most players like Windows Media Player can handle this issue but...
To anyone else who encounters the issue that the MediaPortal playback hangs and the I've found the rout cause for the "[ERROR] -...
Hi, when playing music from a playlist sometimes suddenly the playback hangs in the middle of the track. When i press next, the...
Replies
58
Views
9K
I'll keep that in mind thanks, wouldn't normally be a problem for me as I only hide the OS volume but it may be useful for others.
I'll keep that in mind thanks, wouldn't normally be a problem for me as I only hide the OS volume but it may be useful for others.
Could someone take a look at the attached logs please, since installing windows 10 with MP 1.24 (happened with MP 1.23 also) I've...
Replies
20
Views
5K
Doh......What an Idiot.....I'd selected NOT to autostart MP in CCleaner.:oops::oops::oops::oops::oops::oops:
Doh......What an Idiot.....I'd selected NOT to autostart MP in CCleaner.:oops::oops::oops::oops::oops::oops:
As it says on the tin....Green Button start MP not working....but box ticked in config. Also....notice that MP isn't in the tray...
Replies
1
Views
2K
Yes I can stop windows updates - but that has yet to give problems - I have disabled automatic lenovo updates for now and will have no problems with it ;-) Its and old Lenovo Thinkcentre desktop using the On borad intel 4600 graphic card så all is good for know :-) thanks again for all your help :-)
Yes I can stop windows updates - but that has yet to give problems - I have disabled automatic lenovo updates for now and will have...
I have been using MP 1 for years with no troubles. but in the last couple of days it sudden just crashes when starting live tv...
Replies
20
Views
5K
Ok, I solved it. My mistake was to uninstall mediaportal, tv server only but not mysql. After uninstalling all three, and repeating a fresh installation it went all good.
Ok, I solved it. My mistake was to uninstall mediaportal, tv server only but not mysql. After uninstalling all three, and...
Hello, I installed Mediaportal version 1.24 including the TV Server on my home theater pc. For this last one, when it asks me to...
Replies
8
Views
2K
There's an auto3d updated available in a post, don't have thats under my hand right now, but yiu can use it, arion_p fixed it [emoji106] Glads it was working for you [emoji106] Tapatalk
There's an auto3d updated available in a post, don't have thats under my hand right now, but yiu can use it, arion_p fixed it...
Dear support, After upgrading from 1.22 to either 1.23 or 1.24 all movies or videos I play only shows black screen. Audio is fine...
Replies
4
Views
2K
The problem has disappeared since upgrading to 1.24 so probably just a small glitch in the initial 1.23 install.
The problem has disappeared since upgrading to 1.24 so probably just a small glitch in the initial 1.23 install.
I've been struggling with a couple of issues since attempting to change my OS to windows 10. I use the excellent EPG collector to...
Replies
1
Views
1K
Nop the fact to revert driver Envoyé de mon LG-H870S en utilisant Tapatalk
Nop the fact to revert driver Envoyé de mon LG-H870S en utilisant Tapatalk
Hi Guys, I want to report a MP Crash when I want to watch TV . I upgraded to MP1.24PreReleased but it was the same in MP1.23. Here...
Replies
12
Views
2K
the win button opens the start menu. okay same because I added the "icon.exe" in the system tray
the win button opens the start menu. okay same because I added the "icon.exe" in the system tray
Hello guys. is it possible to access the desktop without leaving mediaportal? I need to click on an incona.exe on the desktop. For...
Replies
5
Views
1K
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be that the latest MP1.23 or latest online grabbers only have one EN IMDB grabber and it gets all the data correctly. To the extent that there is a solution outside of a Mediaportal official release, is that...
I don't believe this is solved. MP1.23 contains three EN IMDB grabbers and all of them result in Plot = "unknown". Solved would be...
This is not just in 1.20, I had the problem in 1.19 as well. But to confirm the problem I upgraded to the latest. I have tried...
Replies
129
Views
13K
  • Locked
Do not pay attention. I don’t know English, so often I don’t understand what is written :)
Do not pay attention. I don’t know English, so often I don’t understand what is written :)
MP 1.23 Bugfixes and Improvements: [MP1-4969] Fix typo in MyMusic DB Index - MediaPortal Jira - in attach [MP1-4970] Update Titan...
Replies
8
Views
3K
Top Bottom