How do I get a Logitech Harmony to work with MP?

pschwar · 2007-11-18, 20:29

Been searching through the forums, can't find an answer to this...

Let's say I got a WinXP HTPC (non-MCE) running MP - I want it to a Logitech Harmony 895 to work with MP - What hardware do I need to add to my HTPC so the Harmony will work with it?

Thanks in advance!

Darre · 2007-11-18, 20:34

A IR receiver.. im using the one supplied with the MCE remote with my harmony remote, but im sure there are many others as well. Alot of HTPC's even get delivered with them built in.

afterwards you just set the harmony remote up to be used with MCE, and use the remappings in MP setup.. and everything is perfect =)

pschwar · 2007-11-18, 20:54

Quote:

Originally Posted by Darre

afterwards you just set the harmony remote up to be used with MCE, and use the remappings in MP setup.. and everything is perfect =)

That's good to hear, thanks!

How about some of those TV-tuner cards out there that come with remotes, do they also include IR receivers?

Darre · 2007-11-19, 08:10

Quote:

Originally Posted by pschwar

Quote:

Originally Posted by Darre

afterwards you just set the harmony remote up to be used with MCE, and use the remappings in MP setup.. and everything is perfect =)

That's good to hear, thanks!

How about some of those TV-tuner cards out there that come with remotes, do they also include IR receivers?

I guess so, but those built in IR-receiver in TV cards will almost certainly only be able to control the Card itself.

synthdood · 2007-11-19, 08:41

In my previous setup (laptop) I used the USB receiver that comes with the microsoft MCE remote. I just finished building a new dedicated HTPC around a Dign/Origen H5 case. The Origen case includes a display and IR reciever that are driven by the IRtrans driver which is natively supported by Mediaportal and which is fully compatible with the MCE remote.

In the Harmony configuration all you need to do is add Media Center device. If your HTPC works with an original MCE remote, it will also work with a Harmony remote.

Pedernal74 · 2007-11-19, 12:50

I have working my MediaPortal configuration with a Harmony 555 remote and the Hauppauge receiver (the one included with a Nova PCI card). You can configure it with the Harmony software selecting MediaPortal as Media Center . It works quite good.

AvsFan · 2007-12-05, 07:21

What about the Harmony Xbox 360 Remote, will that one work with MP too? I'm assuming it will because it's basically the same just a different model but I want to be sure. Are you able to program all of the Harmony buttons in MP or will some be unable to be used?

Also, are most/all IR receivers line-of-sight or can the receiver be "hidden"?

Thank you

Darre · 2007-12-05, 08:18

All remotes that are able to work as MCE remotes _should_ work 100% with MP. With Harmony remotes you can also setup the remote to be mapped for MP specifically.

About the harmony remote for 360: If its remap able then there should be no problem. However I dont know, you could send a mail to their support and ask if its using the harmony remote DB. You could even read up on it your self. If it does it shouldnt be a problem.

In my experience you should have it visible, might work behind minor objects, but it would definitively make the signal weaker. Ive got mine "hidden" under the TV.
|
|
|
|___________TV___________|
___[IR]___|||||||||||_________

like this =)

Spragleknas · 2007-12-05, 12:59

Quote:

Originally Posted by Darre

Quote:

Originally Posted by pschwar

Quote:

Originally Posted by Darre

afterwards you just set the harmony remote up to be used with MCE, and use the remappings in MP setup.. and everything is perfect =)

That's good to hear, thanks!

How about some of those TV-tuner cards out there that come with remotes, do they also include IR receivers?

I guess so, but those built in IR-receiver in TV cards will almost certainly only be able to control the Card itself.

I think this is wrong. Hauppauges remotes can control MediaPortal. I'd go for a MCE-remote bundle,though. The remote itself is (IMO) crap compared to the MS, but the IR reciever is the same.

SouSaRMS · 2007-12-11, 03:40

where can i get a ir receiver if i have a box that don't have one.... or don't have ir receivers from other remotes ???

any store sell ir receiver to work with universal remotes like logitech ??? the connection of the infrared receiver is trough USB ???

hope you can answer me

thanks

2007-11-18, 20:29	#1 (permalink)
pschwar Portal Member Join Date: Nov 2007 Posts: 8 Thanks: 2 Thanked 0 Times in 0 Posts Country:	How do I get a Logitech Harmony to work with MP? Been searching through the forums, can't find an answer to this... Let's say I got a WinXP HTPC (non-MCE) running MP - I want it to a Logitech Harmony 895 to work with MP - What hardware do I need to add to my HTPC so the Harmony will work with it? Thanks in advance!

2007-12-05, 08:18	#8 (permalink)
Darre Portal Member Join Date: Apr 2007 Age: 23 Posts: 829 Thanks: 94 Thanked 71 Times in 54 Posts Country:	All remotes that are able to work as MCE remotes _should_ work 100% with MP. With Harmony remotes you can also setup the remote to be mapped for MP specifically. About the harmony remote for 360: If its remap able then there should be no problem. However I dont know, you could send a mail to their support and ask if its using the harmony remote DB. You could even read up on it your self. If it does it shouldnt be a problem. In my experience you should have it visible, might work behind minor objects, but it would definitively make the signal weaker. Ive got mine "hidden" under the TV. \| \| \| \|___________TV___________\| ___[IR]___\|\|\|\|\|\|\|\|\|\|\|_________ like this =) Last edited by Darre; 2007-12-05 at 08:21.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Logitech Harmony	Avigrace	MCE Replacement Plugin	3	2007-10-16 16:05
Logitech Harmony 525 + Infrarotempfäger + MP = ?	Tarantel	Media Portal - Allgemeines	5	2007-07-25 11:27
Logitech Harmony - MCE Remote	TheBatfink	Support	3	2007-06-12 11:38
logitech harmony 688	dondark	Media Portal - Support	0	2007-02-17 16:02
Logitech Harmony	RoyN	Hardware Selection Help	3	2006-03-22 08:02

2007-11-18, 20:34	#2 (permalink)
Darre Portal Member Join Date: Apr 2007 Age: 23 Posts: 829 Thanks: 94 Thanked 71 Times in 54 Posts Country:	A IR receiver.. im using the one supplied with the MCE remote with my harmony remote, but im sure there are many others as well. Alot of HTPC's even get delivered with them built in. afterwards you just set the harmony remote up to be used with MCE, and use the remappings in MP setup.. and everything is perfect =)

2007-11-19, 08:41	#5 (permalink)
synthdood Portal Member Join Date: Mar 2007 Posts: 46 Thanks: 0 Thanked 0 Times in 0 Posts Country:	In my previous setup (laptop) I used the USB receiver that comes with the microsoft MCE remote. I just finished building a new dedicated HTPC around a Dign/Origen H5 case. The Origen case includes a display and IR reciever that are driven by the IRtrans driver which is natively supported by Mediaportal and which is fully compatible with the MCE remote. In the Harmony configuration all you need to do is add Media Center device. If your HTPC works with an original MCE remote, it will also work with a Harmony remote.

2007-11-19, 12:50	#6 (permalink)
Pedernal74 Portal User Join Date: Sep 2007 Location: Burgos Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I have working my MediaPortal configuration with a Harmony 555 remote and the Hauppauge receiver (the one included with a Nova PCI card). You can configure it with the Harmony software selecting MediaPortal as Media Center . It works quite good.

2007-12-05, 07:21	#7 (permalink)
AvsFan Portal Member Join Date: Nov 2006 Posts: 76 Thanks: 0 Thanked 0 Times in 0 Posts	What about the Harmony Xbox 360 Remote, will that one work with MP too? I'm assuming it will because it's basically the same just a different model but I want to be sure. Are you able to program all of the Harmony buttons in MP or will some be unable to be used? Also, are most/all IR receivers line-of-sight or can the receiver be "hidden"? Thank you

2007-12-11, 03:40	#10 (permalink)
SouSaRMS Portal User Join Date: Dec 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Country:	where can i get a ir receiver if i have a box that don't have one.... or don't have ir receivers from other remotes ??? any store sell ir receiver to work with universal remotes like logitech ??? the connection of the infrared receiver is trough USB ??? hope you can answer me thanks