Technical Sheets to Cineview CI Support for KNC One

patos · 2005-04-06, 17:55

After reading this Post from Frodo: http://nolanparty.com/mediaportal.so...t=3953&start=0
I thought I could just go ask KNC if they were willing to hand out some information about their Cineview CI Modules for their DVB-S card.

Well, they would probably hand out those sheets but want to know to whom they are giving information. Here is the answer I received from their tech support:

Quote:

Sehr geehrter Herr .....,

Für eine Übermittlung entwicklungstechnischer Informationen benötigen wir eine aussagekräftige Selbstdarstellung sowie entsprechende Referenzen.

Translation: "For sending any technical and development Information we would need a meaningful selfpresentation and references" (they meant you are supposed to tell them in which area you work/programme and how qualified you are)

Mit freundlichen Grüßen / Kind regards

Frank Schwede
Coordination Produkt Service
KNC ONE GmbH
Research & Development
service01@knc1.com

Well, since I am just a helper (maybe even beta-tester hehe) and no programmer, you could be interested in contacting him for those sheets.

Thank You!

BoomAlien · 2006-01-23, 13:56

I've found this post over the search engine.

Are there some news concerning the KNC One CI module?

mosquiss · 2006-01-25, 21:03

I have contacted KNC to try to get this technical details but I haven't received any answer. I am willing to do the development of this feature but it seems as if KNC is not interested. Maybe someone else is more lucky and can get an answer from them. If someone has these documents it would be great if you could send them to me.

Regards,

mosquiss

mzemina · 2006-01-25, 21:40

Quote:

Originally Posted by mosquiss

I have contacted KNC to try to get this technical details but I haven't received any answer. I am willing to do the development of this feature but it seems as if KNC is not interested. Maybe someone else is more lucky and can get an answer from them. If someone has these documents it would be great if you could send them to me.

Regards,

mosquiss

Why not just contact Frank Schwede, whose info is located at the beginning of this thread? Email is supplied.

Mike

mosquiss · 2006-01-25, 21:48

I have sent an email to him and also to KNC support but have not received any answer

BoomAlien · 2006-02-09, 21:35

No answers until today?
So I will try to call KNC next week.

mosquiss · 2006-02-10, 11:39

No, no answers from them. It is really curious. I have asked for some accesories in a different email and I got a response inmediately. So, it seems that they only want to sell, but not very interested in someone doing development with their products.

rosco99 · 2006-02-10, 23:33

Quote:

Originally Posted by mosquiss

I have contacted KNC to try to get this technical details but I haven't received any answer. I am willing to do the development of this feature but it seems as if KNC is not interested. Maybe someone else is more lucky and can get an answer from them. If someone has these documents it would be great if you could send them to me.

Regards,

mosquiss

Is there any similarity in the coding required for the Technotrend card?
We have the SDK information for that---see DMAN's post
"We have the SDK to implement CI for Technotrends BDA cards - it will just be a matter of time and patience.
Alot of things are ahead in the queue and no dev has one of these cards.

DMAN"

mosquiss · 2006-02-11, 16:40

Right now I am working with DMAN with Technotrend cards. After we have it working with Technotrend will try to see if it works with KNC1.

Sergei · 2006-05-16, 14:20

Doubt that cause it uses the CImax-TM 2.x
KNC doesn't

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to start a support thread [changed 2006-11-08]	infinityloop	Support	0	2006-11-08 13:58
How to start a support thread [changed 2006-11-08]	infinityloop	Support	0	2006-11-08 13:58
Microsoft DirectX Video Acceleration (DirectX VA) support	Gamester17	Improvement Suggestions	15	2005-05-03 09:01

2006-01-23, 13:56	#2 (permalink)
BoomAlien Portal Member Join Date: Aug 2005 Location: Germany Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts	I've found this post over the search engine. Are there some news concerning the KNC One CI module?

2006-01-25, 21:03	#3 (permalink)
mosquiss Retired Team Member Join Date: Nov 2005 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	I have contacted KNC to try to get this technical details but I haven't received any answer. I am willing to do the development of this feature but it seems as if KNC is not interested. Maybe someone else is more lucky and can get an answer from them. If someone has these documents it would be great if you could send them to me. Regards, mosquiss

2006-01-25, 21:48	#5 (permalink)
mosquiss Retired Team Member Join Date: Nov 2005 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	I have sent an email to him and also to KNC support but have not received any answer

2006-02-09, 21:35	#6 (permalink)
BoomAlien Portal Member Join Date: Aug 2005 Location: Germany Posts: 26 Thanks: 0 Thanked 0 Times in 0 Posts	No answers until today? So I will try to call KNC next week.

2006-02-10, 11:39	#7 (permalink)
mosquiss Retired Team Member Join Date: Nov 2005 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	No, no answers from them. It is really curious. I have asked for some accesories in a different email and I got a response inmediately. So, it seems that they only want to sell, but not very interested in someone doing development with their products.

2006-02-11, 16:40	#9 (permalink)
mosquiss Retired Team Member Join Date: Nov 2005 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	Right now I am working with DMAN with Technotrend cards. After we have it working with Technotrend will try to see if it works with KNC1.

2006-05-16, 14:20	#10 (permalink)
Sergei Portal Member Join Date: Aug 2005 Posts: 17 Thanks: 0 Thanked 1 Time in 1 Post	Doubt that cause it uses the CImax-TM 2.x KNC doesn't