configuration crashes when autotune on Technotrent C-1500

[HTPC_Beginner]

Hello,

I am trying to get my Technotrend C-1500 DVB-C card to work. When I start "configuration.exe", switch to "Capture Cards", select my Technotrend card (which shows up as "Hauppauge Nova-C"), go to autotune, select "dvbc symbolrate 6900.dvbc" for Kabel-BW in Germany the scan starts.

After finding 6 TV channels, configuration.exe crashes

Windows brings up the Message "This application has detected an error and needs to close"
-> when I look at what would be sent to Microsoft I have the following information, maybe it helps:

AppName: configuration.exe, AppVer 1.0.2336.43185
ModName: psisdecd.dll ModVer: 6.5.2600.2180
fDebug: 0 Offset: 0032425

Exception Code: 0xc0000005 Flags: 0x0000000


I am used 02.RC4 and have installed the latest SVN build

Area: Media Portal Program
MediaPortal Version: 0.2.0.0 RC4 (2006-05-26)
MediaPortal Skin: BlueTwo
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPEG/AC3/DTS/LPCM Audio Decoder
Video Codec: Mpeg2Dec Filter
CPU Type: Intel Pentium D - 3.40GHz
Memory: 2 GB
Motherboard: D945GNT (Intel Corporation)
TV Card Model: Technotrend Budget C-1500
TV Card Type: DVB
TV Card Driver: 4.4.10.13 (08.02.2006)
Video Card Model: Radeon X1300 Series (512 MB)
Video Card Driver: 8.173.2.3 (21.09.2005)
Video Card Resolution: 1280x1024
Video Render Type: -
Audio Card Model: Creative X-Fi Audio Processor (WDM)
Audio Card Driver: 5.12.2.1143 (08.08.2005)
Synopsis::


The Log file can be found here:
http://mp.pastebin.com/739082


The last entries are:
____________________________
26.05.2006 13:43:31 dvbc-scan:signal quality:0 signal strength:0 signal present:False
26.05.2006 13:43:31 dvbc-scan:tune dvbcChannel:41/115 340 MHz, Modulation:64QAM SymbolRate:6900
26.05.2006 13:43:33 DVBGraphBDA: signal strength:0 signal quality:0 signal present:False locked:False
26.05.2006 13:43:33 DVBGraph: wait for tunerlock
26.05.2006 13:43:35 dvbc-scan:signal quality:0 signal strength:0 signal present:False
26.05.2006 13:43:35 dvbc-scan:tune dvbcChannel:42/115 348 MHz, Modulation:64QAM SymbolRate:6900
26.05.2006 13:43:37 DVBGraphBDA: signal strength:0 signal quality:0 signal present:False locked:False
26.05.2006 13:43:37 DVBGraph: wait for tunerlock
26.05.2006 13:43:39 dvbc-scan:signal quality:0 signal strength:0 signal present:False
26.05.2006 13:43:39 dvbc-scan:tune dvbcChannel:43/115 364 MHz, Modulation:64QAM SymbolRate:6900
26.05.2006 13:43:40 DVBGraphBDA: signal strength:0 signal quality:0 signal present:False locked:False
26.05.2006 13:43:40 DVBGraph: wait for tunerlock
26.05.2006 13:43:42 dvbc-scan:signal quality:0 signal strength:0 signal present:False
26.05.2006 13:43:42 dvbc-scan:tune dvbcChannel:44/115 370 MHz, Modulation:64QAM SymbolRate:6900
26.05.2006 13:43:44 DVBGraphBDA: signal strength:51 signal quality:100 signal present:True locked:True
26.05.2006 13:43:44 DVBGraph: wait for tunerlock
26.05.2006 13:43:44 FilterPids:33
26.05.2006 13:43:47 dvbc-scan:signal quality:100 signal strength:53 signal present:True
26.05.2006 13:43:48 DVBGraph: StoreChannels() signal level:52 signal quality:100 locked:True
26.05.2006 13:43:50 check...True pids:33 0x0,0x10,0x11,0x64,0x66,0x65,0x67,0x68,0x6A,0x6B,0 x6D,0x74,0x7A,0x7B,0x7D,0x7E,0x69,0x71,0x75,0x7F,0 x72,0x80,0x79,0x81,0x82,0x7C,0x78,0x76,0x77,0x70,0 x73,0x83,0x63,
______________________________

any ideas ?

Any help is greatly appreciated

cheers

Eckehard

[HTPC_Beginner]

Hi,

I stepped over this post and the Patch listed below solved my problem

http://forum.team-mediaportal.com/viewtopic.php?t=8146

Even though I have just one DVB and one analog card in my PC this patch seems to be necessary. It updates the psisdecd.dll which caused the crash.

3th : DVB patch
http://support.microsoft.com/kb/896626


Now I only need to find out why my encrypted channels get a "no signal" message ;-)

Hope it also might help others.

cheers