Hauppage WinTV PVR-150 IR issue - Page 2

MrMad · 2006-07-25, 08:41

Try this:
1. Download this file.
2. Run it so it unpacks itself to a directory.
3. Download the Hauppauge IR drivers from MediaPortal homepage, overwriting the IR32.exe that you unpacked in step 2.
4. Run hcwclear.exe and choose the options "Remove All WinTV Drivers and Applications (Total Removal)" and "Search All .INF Files for Conflicting Hardware".
5. Reboot
6. When the new hardware wizard starts, tell it to look for drivers in the directory you unpacked the drivers to in step 2. ("No, not this time", "Install from a list or specific location", "Search for driver in these locations")
7. Run Setup.exe in the driver directory and make sure to install the IR drivers. You should not have to install the WinTV programs and such.

NOTE!
It is not enough to just run IR32.exe instead of Setup.exe in step 7, that is the mistake I made. The Setup.exe updates the drivers somehow, so it has to be run.

mortiz · 2006-07-25, 14:46

GREAT!

Thank you so much for your help, both of you. This final advice paid of, and everything seems to be working fine for now

mPod · 2006-07-25, 17:28

:mrgreen:

MrBlue · 2006-08-10, 12:39

Hi

Just wanted to say that I had exactly the problems described as above and that the last post by MrMad solved everything, this should be in the manuals wikipages for the hauppauge 45 button remote control.

cudos to MrMad!

shubjero · 2007-05-25, 19:32

Amazing! My remote works! Woooohooooo

Hansanaut · 2008-02-22, 01:23

Old thread...

But I've the same problem and the linked file in 3. is no more available... Where can I get it???

Greetz,

Hansanaut

ZimZim · 2008-02-22, 20:34

Quote:

Originally Posted by Hansanaut

But I've the same problem

Me too.
Please help us

ZimZim · 2008-02-24, 22:36

after a neverending search...

ir32.exe versione 2.49.23332
http://www.hauppauge.de/files/ir32_249.exe

now everything works right!

chiel-s · 2008-04-23, 18:03

I followed the guide written by MrMad but it's not working for me. First of all, the "drivers" directory is not included in the hcw2_3b_23102pp2.exe package so i used the directory from another pvr 150 driver package when it asked for some specific files (hcwPP2.sys etc.)

The strange thing is, when pushing a button on my remote, i get sound out of my speakers (the normal response *bleep* when using your remote. BUT it appears two times...one push gives me two *bleeps*. Nothing happens and the remote ain't working.

Anyone same problem? It's one of the first pvr-150 editions with an oldschool IR receiver (no USB).

Cheers.

2006-07-25, 17:28	#13 (permalink)
mPod Retired Team Member Join Date: Jan 2005 Location: Berlin Age: 34 Posts: 2,086 Thanks: 0 Thanked 3 Times in 3 Posts Country: My System	:mrgreen: __________________ Bad news from the stars... We cannot give any support without a properly filled support template and a full mediaportal.log pasted here. Before you ask...

2008-04-23, 18:03	#19 (permalink)
chiel-s Portal User Join Date: Apr 2007 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	I followed the guide written by MrMad but it's not working for me. First of all, the "drivers" directory is not included in the hcw2_3b_23102pp2.exe package so i used the directory from another pvr 150 driver package when it asked for some specific files (hcwPP2.sys etc.) The strange thing is, when pushing a button on my remote, i get sound out of my speakers (the normal response bleep when using your remote. BUT it appears two times...one push gives me two bleeps. Nothing happens and the remote ain't working. Anyone same problem? It's one of the first pvr-150 editions with an oldschool IR receiver (no USB). Cheers. Last edited by chiel-s; 2008-05-07 at 11:49.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hauppage WinTV PVR USB 2 not recognized	zzz345zzz	General Support	30	2007-11-24 14:42
Hauppage WinTV no channels found	kgk	Get Support	10	2007-02-02 13:22
Failure to get software card hauppauge wintv express working	stragulus	General Support	3	2007-01-08 03:39
hauppage wintv usb "suported" HELP PLEASE!!	yeraze	General Support	12	2006-08-05 03:27
CanÂ´t search for analouge channels, hauppauge hvr-1100.	guthor	General Support	7	2006-06-30 18:28

2006-07-25, 08:41	#11 (permalink)
MrMad Portal Member Join Date: May 2005 Location: Göteborg Age: 34 Posts: 180 Thanks: 7 Thanked 39 Times in 19 Posts Country: My System	Try this: 1. Download this file. 2. Run it so it unpacks itself to a directory. 3. Download the Hauppauge IR drivers from MediaPortal homepage, overwriting the IR32.exe that you unpacked in step 2. 4. Run hcwclear.exe and choose the options "Remove All WinTV Drivers and Applications (Total Removal)" and "Search All .INF Files for Conflicting Hardware". 5. Reboot 6. When the new hardware wizard starts, tell it to look for drivers in the directory you unpacked the drivers to in step 2. ("No, not this time", "Install from a list or specific location", "Search for driver in these locations") 7. Run Setup.exe in the driver directory and make sure to install the IR drivers. You should not have to install the WinTV programs and such. NOTE! It is not enough to just run IR32.exe instead of Setup.exe in step 7, that is the mistake I made. The Setup.exe updates the drivers somehow, so it has to be run.

2006-07-25, 14:46	#12 (permalink)
mortiz Portal Member Join Date: Jul 2006 Location: Norway Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	GREAT! Thank you so much for your help, both of you. This final advice paid of, and everything seems to be working fine for now

2006-08-10, 12:39	#14 (permalink)
MrBlue Portal User Join Date: Aug 2006 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Just wanted to say that I had exactly the problems described as above and that the last post by MrMad solved everything, this should be in the manuals wikipages for the hauppauge 45 button remote control. cudos to MrMad!

2007-05-25, 19:32	#15 (permalink)
shubjero Portal User Join Date: May 2007 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Amazing! My remote works! Woooohooooo

2008-02-22, 01:23	#16 (permalink)
Hansanaut Portal Member Join Date: Sep 2007 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Old thread... But I've the same problem and the linked file in 3. is no more available... Where can I get it??? Greetz, Hansanaut

2008-02-24, 22:36	#18 (permalink)
ZimZim Portal Member Join Date: Jan 2008 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country:	after a neverending search... ir32.exe versione 2.49.23332 http://www.hauppauge.de/files/ir32_249.exe now everything works right!