From sleep tuner issue in MP

thargs · 2007-08-11, 04:41

TV-Server Version:
MediaPortal Version: 0.2.3.0 RC1
MediaPortal Skin: default
Windows Version: XP Pro SP2
CPU Type: Intel Northwood 1.7gig
HDD: Seagate IDE 40gig
Memory: 256 DDR1 Corsair
Motherboard: Asus P4PE
Motherboard Chipset: Intel 845PE
Motherboard Bios: Asus crash free
Video Card: Nvidia FX5900XT
Video Card Driver: 81.98
Sound Card: Asus onboard soundmax
Sound Card AC3:
Sound Card Driver:
1. TV Card: Dvico Fusion DVB-T Dual Digital
1. TV Card Type: DVB-T
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: default
MPEG2 Audio Codec: default
Satelite/CableTV Provider:
HTPC Case: generic
Cooling: basic
Power Supply: generic 300w
Remote: Fusion
TV: Samsung LCD
TV - HTPC Connection: Sub-D

When I come out of sleep (from choosing sleep in MP), I cant use both tuners (have a dual digital). I can hear the USB sound twice (like something is detected and then disconnected). I can watch TV but if I choose to record then I can only watch what Im recording, I cant use the other tuner.

I have tried different combinations of the tuners through the config, like record with one while watching with the other etc and it made no difference.

If I do a fresh restart all is fine. Both tuners work, recording and watching something else fine.

However after sleep, it wont work.

I tried the fusion software to see if the drivers were the issue, both tuners work after coming out of sleep in Fusion software. I also noticed that there were no usb sounds when coming out of sleep without MP.

So MP is trying to do something with the tuners when it comes out of sleep, like it tries to activate either one once again causing issues.

I come out of sleep mode by pressing the keyboard (Bios wont allow me to come out of sleep with a usb device so didnt worry about usb reciever etc)

Hibernate does the same thing.

Has anyone had similar problems? Could it be the card definitions file that I edited so that the dual digital would be detected. ?

Paranoid Delusion · 2007-08-11, 11:42

Nope, it's the usb driver not initialising quickly enough, that's why quite a few of us use PVR-Scheduler (worth the 5 or more Euro's willing to donate) which allows MP to shutdown prior to standby and resume MP after the drivers have initiliased correctly.

This applies to quite a few USB TV cards including my Hauppauge T500.

Vista does not have this problem.

TVE3 with it's slightly different powerscheduler settings may be better, try it and see.

thargs · 2007-08-11, 15:32

Thanks so much for the reply and valuable info. I have downloaded the scheduler and will give it a go tomorrow. Hope it works. If it does then MP is complete for me. Its a great program.

thargs · 2007-08-13, 13:51

I just installed PVR Scheduler and a few issues.

It wont start mediaportal or resume. They say I might need to enable interaction with desktop of PVR Scheduler service but I cant find it.

Also the EPG is not showing in the PVR Scheduler plugin screen.

Also is there a way to join the mediaportal home screen sleep option with PVR Scheduler so that PVR scheduler would take over and shut MP down first. In its current state, if I choose sleep from the home screen Im faced with the same problem. If I want to do it the right way I have to go into Myplugins, select PVR Sch and then choose standbye. A little annoying.

2007-08-11, 04:41	#1 (permalink)
thargs Portal Member Join Date: Jan 2007 Posts: 55 Thanks: 0 Thanked 0 Times in 0 Posts Country:	From sleep tuner issue in MP TV-Server Version: MediaPortal Version: 0.2.3.0 RC1 MediaPortal Skin: default Windows Version: XP Pro SP2 CPU Type: Intel Northwood 1.7gig HDD: Seagate IDE 40gig Memory: 256 DDR1 Corsair Motherboard: Asus P4PE Motherboard Chipset: Intel 845PE Motherboard Bios: Asus crash free Video Card: Nvidia FX5900XT Video Card Driver: 81.98 Sound Card: Asus onboard soundmax Sound Card AC3: Sound Card Driver: 1. TV Card: Dvico Fusion DVB-T Dual Digital 1. TV Card Type: DVB-T 1. TV Card Driver: 2. TV Card: 2. TV Card Type: 2. TV Card Driver: 3. TV Card: 3. TV Card Type: 3. TV Card Driver: 4. TV Card: 4. TV Card Type: 4. TV Card Driver: MPEG2 Video Codec: default MPEG2 Audio Codec: default Satelite/CableTV Provider: HTPC Case: generic Cooling: basic Power Supply: generic 300w Remote: Fusion TV: Samsung LCD TV - HTPC Connection: Sub-D When I come out of sleep (from choosing sleep in MP), I cant use both tuners (have a dual digital). I can hear the USB sound twice (like something is detected and then disconnected). I can watch TV but if I choose to record then I can only watch what Im recording, I cant use the other tuner. I have tried different combinations of the tuners through the config, like record with one while watching with the other etc and it made no difference. If I do a fresh restart all is fine. Both tuners work, recording and watching something else fine. However after sleep, it wont work. I tried the fusion software to see if the drivers were the issue, both tuners work after coming out of sleep in Fusion software. I also noticed that there were no usb sounds when coming out of sleep without MP. So MP is trying to do something with the tuners when it comes out of sleep, like it tries to activate either one once again causing issues. I come out of sleep mode by pressing the keyboard (Bios wont allow me to come out of sleep with a usb device so didnt worry about usb reciever etc) Hibernate does the same thing. Has anyone had similar problems? Could it be the card definitions file that I edited so that the dual digital would be detected. ?

2007-08-11, 11:42	#2 (permalink)
Paranoid Delusion Super Moderator Join Date: Jun 2005 Location: Cheshire UK Posts: 6,619 Thanks: 129 Thanked 233 Times in 207 Posts Country: My System	Nope, it's the usb driver not initialising quickly enough, that's why quite a few of us use PVR-Scheduler (worth the 5 or more Euro's willing to donate) which allows MP to shutdown prior to standby and resume MP after the drivers have initiliased correctly. This applies to quite a few USB TV cards including my Hauppauge T500. Vista does not have this problem. TVE3 with it's slightly different powerscheduler settings may be better, try it and see. __________________ Ray\PD Check your codecs are fine with Filmerit. XP\Vista known issues FOR FULL SUPPORT PLEASE GIVE USER SPECIFICATIONS AND RELEVANT LOG's as per HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sleep-Timer (Put system to sleep in x)	Muldini	Improvement Suggestions	22	2008-10-26 22:28
Sleep/Standy issue for single seat setup	mycrow	Get Support	6	2007-10-22 21:35
Sleep/Hibernate (on wake) Tuner does not work unless done through mediaportal	egandt	support	0	2007-05-27 02:58
Tuner not released when Client goes to sleep.	joboehl	fixed TV-Server / Client Bugs	2	2007-03-21 22:11
Hauppauge remote Issue / Use from Sleep?	CUBED	General Support	5	2006-10-23 07:58

2007-08-11, 15:32	#3 (permalink)
thargs Portal Member Join Date: Jan 2007 Posts: 55 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Thanks so much for the reply and valuable info. I have downloaded the scheduler and will give it a go tomorrow. Hope it works. If it does then MP is complete for me. Its a great program.

2007-08-13, 13:51	#4 (permalink)
thargs Portal Member Join Date: Jan 2007 Posts: 55 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I just installed PVR Scheduler and a few issues. It wont start mediaportal or resume. They say I might need to enable interaction with desktop of PVR Scheduler service but I cant find it. Also the EPG is not showing in the PVR Scheduler plugin screen. Also is there a way to join the mediaportal home screen sleep option with PVR Scheduler so that PVR scheduler would take over and shut MP down first. In its current state, if I choose sleep from the home screen Im faced with the same problem. If I want to do it the right way I have to go into Myplugins, select PVR Sch and then choose standbye. A little annoying.