Status of Twinhan CI support

dman_lfc · 2005-08-08, 13:00

Please post your working or non-working MediaPortal Twinhan CI configurations for others to see...

also please tell us if the CAM is working with MyTheathre or other apps

An Example:

Status: Not Working
Card Type: DVB-S (1030)
Card Driver: 1.2.3.4
CAM: Dragon CAM v4.01
CAM Firmware: Predator 320
DVB Provider: Foxtel
FTA: YES
Scrambled: NO

Works with MyTheatre using WDM drivers...

Note: This is not a discussion thread but a quick snapshot for users to see what works or does not.

Official status for my tests...

Status: Not Working
Card Type: DVB-S (1032A)
Card Driver: 1.2.3.8
CAM: Dragon CAM v4.01
CAM Firmware: Predator 352
DVB Provider: SKY UK
FTA: YES
Scrambled: NO

Status: Working
Card Type: DVB-S (1032A)
Card Driver: 1.2.3.8
CAM: Viaccess
CAM Firmware: 4.84
DVB Provider: Arabesque
FTA: YES
Scrambled: YES

DMAN

moremetall · 2005-08-08, 13:47

Status: Working in MP
CAM:Aston DVB CI Module DVB
Platform: EuroCAM
Application: 1.0400B
Viaccess Version: V 483
Hardware: P/N HW 1.0
DVB number: 2557
Provider: BOXER

Works in Mytheatre as well

Chimen · 2005-08-08, 14:46

Status: Working in MediaPortal 0.1.3 final
CAM: SCM Microsystem
Platform: EuroCAM
Application: V 1.08
Viaccess Version: V 483
Hardware: P/N 904240 Rev 1.0
DVB number: 2297
Provider: BOXER

Works in Mytheatre as well.

fjonson · 2005-08-08, 19:18

Status: Working
CAM: SCM Microsystem
Platform: CONAX
Hardware: P/N 904180 Rev 1.0
Provider: CANAL DIGITAL

Works nice with MediaPortal 1.3.0 but it works best with CVS build after 0801.

Where is some issues probably because of the cvs build.
First off all Swedish television channel 1 & 2 are sending sound Both AC3 and normal sound. But if you don’t remove the AC3 pid from the channel list where is no sound.
Second. Discovery Channel has no sound at all. All pid’s are correct and there is no additional information in the logs.
Third. Disney channel have 4 languages mediaportal only prepared for 3. But there is one more problem with this channel. Even if I remove all pid except the Swedish one I only get Danish language. Locking into the logs every thing locks fine until the sound pid is transmitted it’s the throng one. There do mediaportal get the pid information, I have removed all language pid’s except the Swedish one.

lout · 2005-08-09, 01:24

Status: Working but wrong audio 1030A
CAM: CA modul X-cam
Platform: Cryptoworks
Provider: UPC Direct

i have picture ok but audio its wrong languange if i try to chnge in mp nothing
happens if i change pids in setup noting happens...
MediaPortal 1.3.0
Plz help me how to change audio thnx

X-CAM modul on 1030A work ok with software from Twinhan !!!

trannel · 2005-08-11, 19:20

Status: Working
Card: Twinhan Cab CI, model 20310
Type: DVB-C
CAM: SCM Microsystem
Platform: CONAX
CAM Hardware: P/N 904180 Rev 1.0
Provider: Comhem

Driver veriosn 1.2.3.8.

Its working OK, but i can't get same framerate trough my computer as if i use the Humax box. It's very annoying now in World Cup times

/Trannel

KRA · 2005-08-11, 19:23

Status: Working almost.. MP 0.1.3 Final
Card Type: DVB-S (1030a)
CAM: CONAX CAM v4.0
DVB Provider: Canal Digital Norway

It is working, I can watch most channels, Some channels are not working.
Those channels that are working, seem to work just fine, however the HD channel isn't perfect, it's jerking, have some artifacts and cause tearing, even thoug the cpu usage is still only 80%. Some Channels don't have sound, this is most likely AC3 related, however this might be codec related, nvidia decoder seems to get a DD stream, but I hear nothing.

maju · 2005-08-13, 11:28

DON'T FORGET THERE ARE BIG DIFFERENCES BETWEEN THE DIFFERENT TYPES OF TWINHAN CI CARDS!!!

CAM's like Matrix, Dragon, Joker, XCAM, etc will never work with the Twinhan CI cards with product code 1030x! These CAM's are only working with the newest release of the Twinhan CI card: 1032A!

SO PLEASE EXTEND YOUR CARD INFO WITH THE PRODUCT CODE OF YOUR CARD!

I know the 1032A is currently not available in many areas like central europe. To get a Twinhan 1032A in this area, you have to decide for a Twinhan OEM product like DigitalRise (sorry for the promo ...)

maju · 2005-08-13, 11:37

Status: Working
Card Type: DVB-S (1032A)
CAM: Matrix Revolutions
CAM Firmware: MREV 225
DVB Provider: all FTA and ...

2005-08-18, 12:30

My Example:

Status: Not Working :cry:
Card Type: DVB-T CI (3040)
CAM: SCM Microsystem EuroCam
CAM Firmware: Hardware: P/N 904240 Rev 1.0
DVB Provider: Boxer Sweden
FTA: ?
Scrambled: ?

Works fine with Twinhans software!! All "pay" channels works fine!!
But in MP I only recive this message "Unable to create graph for this device" when I try to add my Twinhan DVB-T CI card. Pleas help!
(MP 1.3.0 BDA 1.2.2.0)

2005-08-08, 13:00	#1 (permalink)
dman_lfc Portal Manager Join Date: Jul 2004 Location: UK Posts: 1,692 Thanks: 0 Thanked 27 Times in 23 Posts Country: My System	Status of Twinhan CI support Please post your working or non-working MediaPortal Twinhan CI configurations for others to see... also please tell us if the CAM is working with MyTheathre or other apps An Example: Status: Not Working Card Type: DVB-S (1030) Card Driver: 1.2.3.4 CAM: Dragon CAM v4.01 CAM Firmware: Predator 320 DVB Provider: Foxtel FTA: YES Scrambled: NO Works with MyTheatre using WDM drivers... Note: This is not a discussion thread but a quick snapshot for users to see what works or does not. Official status for my tests... Status: Not Working Card Type: DVB-S (1032A) Card Driver: 1.2.3.8 CAM: Dragon CAM v4.01 CAM Firmware: Predator 352 DVB Provider: SKY UK FTA: YES Scrambled: NO Status: Working Card Type: DVB-S (1032A) Card Driver: 1.2.3.8 CAM: Viaccess CAM Firmware: 4.84 DVB Provider: Arabesque FTA: YES Scrambled: YES DMAN __________________ Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote. Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.

2005-08-09, 01:24	#5 (permalink)
lout Portal Member Join Date: Mar 2005 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts	Working but wrong audio Status: Working but wrong audio 1030A CAM: CA modul X-cam Platform: Cryptoworks Provider: UPC Direct i have picture ok but audio its wrong languange if i try to chnge in mp nothing happens if i change pids in setup noting happens... MediaPortal 1.3.0 Plz help me how to change audio thnx X-CAM modul on 1030A work ok with software from Twinhan !!!

2005-08-13, 11:37	#9 (permalink)
maju Portal Member Join Date: Feb 2005 Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts	Re: Twinhan CI Support Status: Working Card Type: DVB-S (1032A) CAM: Matrix Revolutions CAM Firmware: MREV 225 DVB Provider: all FTA and ...

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't Load TV Channels	theitalianone	Installation, configuration support	0	2006-08-09 00:18
Twinhan DVB-S card, no TV stations picked up during scan	Bat121	General Support	0	2006-08-05 08:34
ATI Wonder Elite- media protal crashes at channel scan	ptighe	General Support	2	2006-06-14 12:14
After first time entering .apefolder all files is unknown.	PHN2	The old Bugreport Forum	1	2006-03-15 17:28
Shuttering pic. when looking at TV	bigal	General Support	28	2006-03-05 12:12

2005-08-08, 13:47	#2 (permalink)
moremetall Portal Member Join Date: Oct 2004 Location: Sweden Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Status: Working in MP CAM:Aston DVB CI Module DVB Platform: EuroCAM Application: 1.0400B Viaccess Version: V 483 Hardware: P/N HW 1.0 DVB number: 2557 Provider: BOXER Works in Mytheatre as well

2005-08-08, 14:46	#3 (permalink)
Chimen Portal Member Join Date: Jul 2005 Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Status: Working in MediaPortal 0.1.3 final CAM: SCM Microsystem Platform: EuroCAM Application: V 1.08 Viaccess Version: V 483 Hardware: P/N 904240 Rev 1.0 DVB number: 2297 Provider: BOXER Works in Mytheatre as well.

2005-08-08, 19:18	#4 (permalink)
fjonson Portal Member Join Date: Feb 2005 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	Status: Working CAM: SCM Microsystem Platform: CONAX Hardware: P/N 904180 Rev 1.0 Provider: CANAL DIGITAL Works nice with MediaPortal 1.3.0 but it works best with CVS build after 0801. Where is some issues probably because of the cvs build. First off all Swedish television channel 1 & 2 are sending sound Both AC3 and normal sound. But if you don’t remove the AC3 pid from the channel list where is no sound. Second. Discovery Channel has no sound at all. All pid’s are correct and there is no additional information in the logs. Third. Disney channel have 4 languages mediaportal only prepared for 3. But there is one more problem with this channel. Even if I remove all pid except the Swedish one I only get Danish language. Locking into the logs every thing locks fine until the sound pid is transmitted it’s the throng one. There do mediaportal get the pid information, I have removed all language pid’s except the Swedish one.

2005-08-11, 19:20	#6 (permalink)
trannel Portal Member Join Date: Jul 2005 Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts	Status: Working Card: Twinhan Cab CI, model 20310 Type: DVB-C CAM: SCM Microsystem Platform: CONAX CAM Hardware: P/N 904180 Rev 1.0 Provider: Comhem Driver veriosn 1.2.3.8. Its working OK, but i can't get same framerate trough my computer as if i use the Humax box. It's very annoying now in World Cup times /Trannel

2005-08-11, 19:23	#7 (permalink)
KRA Portal Member Join Date: Jul 2005 Age: 31 Posts: 130 Thanks: 5 Thanked 4 Times in 4 Posts Country:	Status: Working almost.. MP 0.1.3 Final Card Type: DVB-S (1030a) CAM: CONAX CAM v4.0 DVB Provider: Canal Digital Norway It is working, I can watch most channels, Some channels are not working. Those channels that are working, seem to work just fine, however the HD channel isn't perfect, it's jerking, have some artifacts and cause tearing, even thoug the cpu usage is still only 80%. Some Channels don't have sound, this is most likely AC3 related, however this might be codec related, nvidia decoder seems to get a DD stream, but I hear nothing.

2005-08-13, 11:28	#8 (permalink)
maju Portal Member Join Date: Feb 2005 Posts: 24 Thanks: 0 Thanked 0 Times in 0 Posts	DON'T FORGET THERE ARE BIG DIFFERENCES BETWEEN THE DIFFERENT TYPES OF TWINHAN CI CARDS!!! CAM's like Matrix, Dragon, Joker, XCAM, etc will never work with the Twinhan CI cards with product code 1030x! These CAM's are only working with the newest release of the Twinhan CI card: 1032A! SO PLEASE EXTEND YOUR CARD INFO WITH THE PRODUCT CODE OF YOUR CARD! I know the 1032A is currently not available in many areas like central europe. To get a Twinhan 1032A in this area, you have to decide for a Twinhan OEM product like DigitalRise (sorry for the promo ...)

2005-08-18, 12:30	#10 (permalink)
MGK Guest Posts: n/a	My Example: Status: Not Working :cry: Card Type: DVB-T CI (3040) CAM: SCM Microsystem EuroCam CAM Firmware: Hardware: P/N 904240 Rev 1.0 DVB Provider: Boxer Sweden FTA: ? Scrambled: ? Works fine with Twinhans software!! All "pay" channels works fine!! But in MP I only recive this message "Unable to create graph for this device" when I try to add my Twinhan DVB-T CI card. Pleas help! (MP 1.3.0 BDA 1.2.2.0)