MediaPortal Forums HTPC/MediaCenter

Go Back   MediaPortal Forum » MediaPortal 1 » Get Support » General Support


General Support Post problems you have when using MediaPortal, or pre installation questions in here.

Reply
 
Thread Tools Display Modes
Old 2006-01-21, 11:13   #11 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

The error will be different however it still highlights that your software encoder is not installed correctly.

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Old 2006-01-21, 20:46   #12 (permalink)
Portal Member
 
Join Date: Jan 2006
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts


Default

ok, after some investigation using GraphEdit i know that i am missing this:

DirectShow Filters
MainConcept (Hauppauge) MPEG Multiplexer
@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E680-2FF5-4DB1-8235-AB35BDCAF95E}

all ather MainConcept filters needed is installed and present in GraphEdit except that multiplexer

i have used wintv-hvr-1100_setup_23206.exe packgae either from link mentioned above or from hauppauge site.

Any idea where to get the multiplexer filter?
pigster is offline   Reply With Quote
Old 2006-01-22, 10:34   #13 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

Try a re-install

Otherwise register hauppaugemcmuxmpeg.ax

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Old 2006-01-22, 10:47   #14 (permalink)
Portal Member
 
Join Date: Jan 2006
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts


Default

This is it, i dont't have this file, i have tried to reinstall many times but this and only this file is always missing, i have hauppaugempgmux.dll but i do not have the.ax file, please can you post this file somwhere?
pigster is offline   Reply With Quote
Old 2006-01-22, 15:20   #15 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

Very strange indeed.
I just checked the wintv-hvr-1100_setup_23206.exe file from the web site and the filters are indeed different.

Contact - atomizasser as he sent me the info.
Maybe he has a different version.

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Old 2006-01-22, 15:32   #16 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

AHA!!!

You need SoftPVR_Update.EXE which is in hcw21nova-t.exe.

This is here...
http://hauppauge.lightpath.net/de/ch...cw21nova-t.exe

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Old 2006-01-22, 17:58   #17 (permalink)
Portal Member
 
Join Date: Jan 2006
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts


Default

i have figured this out some time ago, this package contans all needed filters, EXCEPT multiplexer
pigster is offline   Reply With Quote
Old 2006-01-22, 20:47   #18 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

You got mail

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Old 2006-01-22, 22:24   #19 (permalink)
Portal Member
 
Join Date: Jan 2006
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts


Default

ok i have installed and registered multiplexer file you have sent me (thanks for this), seems like tuning the card works now, but i have only black screen nothing more here goes the capture.log

22.1.2006 22:16:41 video device moniker :@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_9402 0070&rev_05#4&22656c78&0&60f0#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
22.1.2006 22:16:41 captureDeviceDeviceName:@device:pnp:\\?\pci#ven_14 f1&dev_8800&subsys_94020070&rev_05#4&22656c78&0&60 f0
22.1.2006 22:16:41 Using card#0
22.1.2006 22:16:41 filter tvtuner='Hauppauge WinTV 88x Tuner' check:True
22.1.2006 22:16:41 CheckDevice:@device:pnp:\\?\stream#hcw88tun.hcwpnp #5&8105a6c&1&1
22.1.2006 22:16:41 Found Hauppauge WinTV 88x Tuner=@device:pnp:\\?\stream#hcw88tun.hcwpnp#5&810 5a6c&1&1#{a799a800-a46d-11d0-a18c-00a02401dcd4}\global
22.1.2006 22:16:41 filter tvaudio='Hauppauge WinTV 88x TvAudio' check:True
22.1.2006 22:16:41 filter crossbar='Hauppauge WinTV 88x Crossbar' check:True
22.1.2006 22:16:41 CheckDevice:@device:pnp:\\?\stream#hcw88bar.cfgox# 5&8105a6c&1&0
22.1.2006 22:16:41 Found Hauppauge WinTV 88x Crossbar=@device:pnp:\\?\stream#hcw88bar.cfgox#5&8 105a6c&1&0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global
22.1.2006 22:16:41 filter capture='Hauppauge WinTV 88x Video Capture' check:True
22.1.2006 22:16:41 filter videncode='MainConcept (Hauppauge) MPEG Video Encoder' check:False
22.1.2006 22:16:41 filter audcapture='Hauppauge WinTV 88x Audio Capture' check:False
22.1.2006 22:16:41 filter audencode='MainConcept (Hauppauge) MPEG Audio Encoder' check:False
22.1.2006 22:16:41 filter mux='MainConcept (Hauppauge) MPEG Multiplexer' check:False
22.1.2006 22:16:41 TVCapture.StartTimeShifting() Card:1 W
22.1.2006 22:16:41 TVCapture.CreateGraph() Card:1
22.1.2006 22:16:41 SinkGraphEx:CreateGraph() IN
22.1.2006 22:16:41 SinkGraphEx: Create new filter graph (IGraphBuilder)
22.1.2006 22:16:41 SinkGraphEx: Get the Capture Graph Builder (ICaptureGraphBuilder2)
22.1.2006 22:16:41 SinkGraphEx: Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
22.1.2006 22:16:41 SinkGraphEx: Add graph to ROT table
22.1.2006 22:16:41 SinkGraphEx: Adding configured filters...
22.1.2006 22:16:42 SinkGraphEx: adding filter <Hauppauge WinTV 88x Tuner> with moniker <@device:pnp:\\?\stream#hcw88tun.hcwpnp#5&8105a6c& 1&1#{a799a800-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: Added filter <Hauppauge WinTV 88x Tuner> with moniker <@device:pnp:\\?\stream#hcw88tun.hcwpnp#5&8105a6c& 1&1#{a799a800-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: adding filter <Hauppauge WinTV 88x TvAudio> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_9402 0070&rev_05#4&22656c78&0&60f0#{a799a802-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: Added filter <Hauppauge WinTV 88x TvAudio> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_9402 0070&rev_05#4&22656c78&0&60f0#{a799a802-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: adding filter <Hauppauge WinTV 88x Crossbar> with moniker <@device:pnp:\\?\stream#hcw88bar.cfgox#5&8105a6c&1 &0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: Added filter <Hauppauge WinTV 88x Crossbar> with moniker <@device:pnp:\\?\stream#hcw88bar.cfgox#5&8105a6c&1 &0#{a799a801-a46d-11d0-a18c-00a02401dcd4}\global>
22.1.2006 22:16:42 SinkGraphEx: adding filter <Hauppauge WinTV 88x Video Capture> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_9402 0070&rev_05#4&22656c78&0&60f0#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global>
22.1.2006 22:16:42 SinkGraphEx: Added filter <Hauppauge WinTV 88x Video Capture> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_9402 0070&rev_05#4&22656c78&0&60f0#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global>
22.1.2006 22:16:42 SinkGraphEx: adding filter <MainConcept (Hauppauge) MPEG Video Encoder> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E660-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: Added filter <MainConcept (Hauppauge) MPEG Video Encoder> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E660-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: adding filter <Hauppauge WinTV 88x Audio Capture> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8811&subsys_9402 0070&rev_05#4&22656c78&0&61f0#{19689bf6-c384-48fd-ad51-90e58c79f70b}\{5ea9c068-1dfe-41c5-a2de-00a0c9f21fc7}>
22.1.2006 22:16:42 SinkGraphEx: Added filter <Hauppauge WinTV 88x Audio Capture> with moniker <@device:pnp:\\?\pci#ven_14f1&dev_8811&subsys_9402 0070&rev_05#4&22656c78&0&61f0#{19689bf6-c384-48fd-ad51-90e58c79f70b}\{5ea9c068-1dfe-41c5-a2de-00a0c9f21fc7}>
22.1.2006 22:16:42 SinkGraphEx: adding filter <MainConcept (Hauppauge) MPEG Audio Encoder> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E670-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: Added filter <MainConcept (Hauppauge) MPEG Audio Encoder> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E670-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: adding filter <MainConcept (Hauppauge) MPEG Multiplexer> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E680-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: Added filter <MainConcept (Hauppauge) MPEG Multiplexer> with moniker <@device:sw:{083863F1-70DE-11D0-BD40-00A0C911CE86}\{C251E680-2FF5-4DB1-8235-AB35BDCAF95E}>
22.1.2006 22:16:42 SinkGraphEx: Adding configured filters...DONE
22.1.2006 22:16:42 SinkGraphEx: Adding configured pin connections...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Tuner>:0 with <Hauppauge WinTV 88x Crossbar>:%tvtuner%
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Tuner>:1 with <Hauppauge WinTV 88x TvAudio>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <1> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x TvAudio>:0 with <Hauppauge WinTV 88x Crossbar>:%audiotuner%
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Crossbar>:0 with <Hauppauge WinTV 88x Video Capture>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Crossbar>:1 with <Hauppauge WinTV 88x Video Capture>:1
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <1> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <1> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Video Capture>:0 with <MainConcept (Hauppauge) MPEG Video Encoder>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Video Capture>:4 with <Hauppauge WinTV 88x Audio Capture>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <4> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <Hauppauge WinTV 88x Audio Capture>:0 with <MainConcept (Hauppauge) MPEG Audio Encoder>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <MainConcept (Hauppauge) MPEG Video Encoder>:0 with <MainConcept (Hauppauge) MPEG Multiplexer>:0
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Connecting <MainConcept (Hauppauge) MPEG Audio Encoder>:0 with <MainConcept (Hauppauge) MPEG Multiplexer>:1
22.1.2006 22:16:42 SinkGraphEx: Found sourcePin: <0> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Found pin: <1> <System.__ComObject>
22.1.2006 22:16:42 SinkGraphEx: Pins connected...
22.1.2006 22:16:42 SinkGraphEx: Adding configured pin connections...DONE
22.1.2006 22:16:42 SinkGraphEx: Capturing:720x576
22.1.2006 22:16:42 mpeg2:add new MPEG2 Demultiplexer to graph
22.1.2006 22:16:42 mpeg2:create video out pin on MPEG2 demuxer
22.1.2006 22:16:42 mpeg2:create audio out pin on MPEG2 demuxer
22.1.2006 22:16:42 mpeg2:find MPEG2 demuxer input pin
22.1.2006 22:16:42 mpeg2:found MPEG2 demuxer input pin
22.1.2006 22:16:42 mpeg2:MPEG2 demuxer map MPG stream 0xe0->video output pin
22.1.2006 22:16:42 mpeg2:mapped MPEG2 demuxer stream 0xe0->video output
22.1.2006 22:16:42 mpeg2:MPEG2 demuxer map MPG stream 0xc0->audio output pin
22.1.2006 22:16:42 mpeg2:mapped MPEG2 demuxer stream 0xc0->audio output
22.1.2006 22:16:42 SinkGraphEx:CreateGraph() OUT
22.1.2006 22:16:43 SinkGraphtartTimeShifting()
22.1.2006 22:16:43 SinkGraph:TuneChannel() tune to channel:54 country:0 standard:None nameW
22.1.2006 22:16:43 SinkGraph:TuneChannel() tuningspace:0 country:0 tv standard:None cable:False
22.1.2006 22:16:43 SinkGraph:TuneChannel() tuned to channel:54 county:420 freq:154,25 MHz. tvformatAL_D signalignalPresent
22.1.2006 22:16:44 mpeg2:add Videoanalyzer
22.1.2006 22:16:44 mpeg2:add streambuffersink
22.1.2006 22:16:44 mpeg2tartTimeshifting(C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv)
22.1.2006 22:16:44 mpeg2:render graph
22.1.2006 22:16:44 mpeg2:render to :C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv
22.1.2006 22:16:44 mpeg2:connect demux video out->analyzer in
22.1.2006 22:16:44 mpeg2:demux video out connected to analyzer
22.1.2006 22:16:44 mpeg2:analyzer out->stream buffer
22.1.2006 22:16:44 mpeg2:connected to streambuffer
22.1.2006 22:16:44 mpeg2:demux audio out->stream buffer
22.1.2006 22:16:44 mpeg2:audio out connected to streambuffer
22.1.2006 22:16:44 mpeg2et folder:C:\Documents and Settings\petra\Dokumenty\My Recordings\card1 filecount 6-8, fileduration:300 sec
22.1.2006 22:16:44 mpeg2:lock profile
22.1.2006 22:16:45 mpeg2: mediactl started
22.1.2006 22:16:54 SinkGraph:TuneChannel() tune to channel:63 country:0 standard:None name:CT1
22.1.2006 22:16:54 SinkGraph:TuneChannel() tuningspace:0 country:0 tv standard:None cable:False
22.1.2006 22:16:55 SinkGraph:TuneChannel() tuned to channel:63 county:420 freq:175,25 MHz. tvformatAL_D signalignalPresent
22.1.2006 22:16:58 TVCapture.Stop() Card:1
22.1.2006 22:16:58 TVCapture.StopTimeShifting() Card:1
22.1.2006 22:16:58 SinkGraphtopTimeShifting()
22.1.2006 22:16:58 mpeg2topTimeShifting()
22.1.2006 22:16:58 mpeg2:unlock profile
22.1.2006 22:16:58 mpeg2: stop mediactl
22.1.2006 22:16:58 mpeg2: stopped mediactl
22.1.2006 22:16:58 TVCapture.DeleteGraph() Card:1
22.1.2006 22:16:58 SinkGrapheleteGraph()
22.1.2006 22:16:58 mpeg2: close interfaces
22.1.2006 22:16:59 mpeg2: close interfaces

and the mediaportal.log

.....
22.1.2006 22:16:52 window:MediaPortal.Dialogs.GUIDialogMenu init
22.1.2006 22:16:54 GUITVHome.ViewChannel(): View channel=CT1 ts:True
22.1.2006 22:16:54 RecordertartViewing on:CT1 True True
22.1.2006 22:16:54 Recorder:HandleView CT1 True True
22.1.2006 22:16:54 RecordertartViewing() channel:CT1 tvon:True timeshift:True vmr9:False
22.1.2006 22:16:54 Recorder: Card:1 viewing:False recording:False timeshifting:True channelW
22.1.2006 22:16:54 Recorder: Turn tv on channel:CT1
22.1.2006 22:16:54 Recorder: Found card:1
22.1.2006 22:16:54 Recorder: tv channel changed:CT1
22.1.2006 22:16:54 teletext: clear teletext cache
22.1.2006 22:16:54 TVCapture: change channel to :CT1
22.1.2006 22:16:54 SinkGraph:TuneChannel() tune to channel:63 country:0 standard:None name:CT1
22.1.2006 22:16:54 SinkGraph:TuneChannel() tuningspace:0 country:0 tv standard:None cable:False
22.1.2006 22:16:54 Playlistplayer.Stopfile
22.1.2006 22:16:55 SinkGraph:TuneChannel() tuned to channel:63 county:420 freq:175,25 MHz. tvformatAL_D signalignalPresent
22.1.2006 22:16:55 Recorder: start viewing timeshift file of card 1
22.1.2006 22:16:55 teletext: grab teletext for card:Hauppauge HVR-1100 Analogue
22.1.2006 22:16:55 RecordertartViewing off:CT1 True True done
22.1.2006 22:16:55 Playlistplayer.StartFile(C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv)
22.1.2006 22:16:55 g_Player.Play(C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv)
22.1.2006 22:16:55 player:ended
.......

any ideas ?

it seems that all the things arround DirectShow graphs is quiet simple, but it doesn't work, and i really don't have idea why
pigster is offline   Reply With Quote
Old 2006-01-22, 23:58   #20 (permalink)
Portal Manager
 
dman_lfc's Avatar
 
Join Date: Jul 2004
Location: UK
Posts: 1,692
Thanks: 0
Thanked 27 Times in 23 Posts

Country:

My System

Send a message via MSN to dman_lfc Send a message via Skype™ to dman_lfc
Default

It works fine here and there are no errors in your logs which would cause it.

Anyway - since the files are different on the internet now I have modified them to suit.
So use Sofware_Encoder_Setup_23339.EXE from the MCE 3.1a CD with associated HVR drivers which you can get here...

http://hauppauge.lightpath.net/softw...mce_cd_31a.zip

This works fine.

DMAN
__________________
Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote.
Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.
dman_lfc is offline   Reply With Quote
Reply

Bookmarks

Tags
1100, hvr, support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATSC Card Owners: Come here for Support Commodore 64 General Support 438 Yesterday 05:48
How to start a support thread [changed 2006-11-08] infinityloop Support 0 2006-11-08 13:58
How to start a support thread [changed 2006-11-08] infinityloop Support 0 2006-11-08 13:58
FM-Radio Support for conexant 88x (Hauppauge HVR 1100) eagle Improvement Suggestions 1 2005-08-19 00:01
Microsoft DirectX Video Acceleration (DirectX VA) support Gamester17 Improvement Suggestions 15 2005-05-03 09:01


All times are GMT +1. The time now is 06:00.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0 Protected by Akismet Blog with WordPress
Advertisement System V2.6 By   Branden