Support for HVR 1100 - Page 3

pigster · 2006-01-23, 12:28

ok, i have fully uninstalled all programs / filters / drivers and installed those from mce_cd_31a.zip. There is no MainConcept filters so i have to install it from SoftPVR package i have, and add MPEG multiplexer that i have from you. But still no success. TV cannot be turned ON (i click turn on TV and it stays off), when i try to Autocan channels, it tunes right (it gives me the choice to store tuned channel) but the Preview is black. Than i tried to run GraphEdit and build whole graph, except at the end when i was adding MPEG multiplexer i have choosed file to output into, than i have started the graph, waited few seconds and stopped. What was quiet strang, that the file was correct MPEG and contained RIGHT video and audio, so it seems that everything is working. The problem seems to be somewhere agter Multiplexer. If you teke a look on the log there is file mentioned C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv.
If i understand it right, MP records video into file and than it plays it. But this file is never created. The folder card1 is present but is always empty. Any ideas ?

pigster · 2006-01-24, 18:26

FINALLY SOLVED
new CVS did it.

also definition in CVS has changed
now you need this package
http://hauppauge.lightpath.net/softw...etup_23206.exe

BTW, i have PIII 733MHz and it work great (without timeshift amd without recording but it works)

garethledger · 2006-02-23, 09:06

Do I need to follow steps 1 -3, if I just want DVB-T and to use CVBS for external Cable Tuner.

Many Thanks

Quote:

Originally Posted by dman_lfc

Correct with the following restrictions:

1. EPG has to be turned off.
2. You need to install the software encoders available from the Hauppauge web site.
3. You cannot use Digital tuning & Analogue tuning at the same time.

Note: I have tested that you can record from CVBS or SVHS whilst recording / watching DVB-T.

4. You need at least a 3.0GHz CPU.

DMAN

dman_lfc · 2006-02-27, 09:08

Yes although I have successfully used and recorded from the CVBS input while watching a DVB-T channel.
I think this is mainly because the Analogue Tuner is inactive.

DMAN

alai · 2006-07-23, 15:25

I have read the post but I cannot to do analog TV and radio works and I don't know why...

I have installed SoftPVR_Update.EXE but nothing happens... Also I'm not a specialist in this...

Thanks in advance

alai · 2006-07-23, 15:28

sorry, the error message is "unable to create graph for this device!!!"
I have the lastest updates of windows (XP home) and media portal and drivers. (the graphic card is Ati x300 pcixpress)

fenomeno83 · 2006-07-23, 15:52

WORK!!!!Read: http://forum.team-mediaportal.com/viewtopic.php?t=16525

2006-02-27, 09:08	#24 (permalink)
dman_lfc Portal Manager Join Date: Jul 2004 Location: UK Posts: 1,692 Thanks: 0 Thanked 27 Times in 23 Posts Country: My System	Yes although I have successfully used and recorded from the CVBS input while watching a DVB-T channel. I think this is mainly because the Analogue Tuner is inactive. DMAN __________________ Hardware: Core2 Duo 3.0GHz, Nvidia 8500GS (256MB), 1GB DDR2, Intel DG33TL MB, 2x FireDTV DVB-S2 cards & Nova 500-T in a Antec Fusion case with VFD & iMon remote. Software: Windows XP MCE2005, PureVideo codecs & Cyberlink PowerDVD 7.x codecs.

2006-07-23, 15:25	#25 (permalink)
alai Portal User Join Date: Jul 2006 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Unable to create graph HVR-1100 I have read the post but I cannot to do analog TV and radio works and I don't know why... I have installed SoftPVR_Update.EXE but nothing happens... Also I'm not a specialist in this... Thanks in advance

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATSC Card Owners: Come here for Support	Commodore 64	General Support	438	Yesterday 05:48
How to start a support thread [changed 2006-11-08]	infinityloop	Support	0	2006-11-08 13:58
How to start a support thread [changed 2006-11-08]	infinityloop	Support	0	2006-11-08 13:58
FM-Radio Support for conexant 88x (Hauppauge HVR 1100)	eagle	Improvement Suggestions	1	2005-08-19 00:01
Microsoft DirectX Video Acceleration (DirectX VA) support	Gamester17	Improvement Suggestions	15	2005-05-03 09:01

2006-01-23, 12:28	#21 (permalink)
pigster Portal Member Join Date: Jan 2006 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	ok, i have fully uninstalled all programs / filters / drivers and installed those from mce_cd_31a.zip. There is no MainConcept filters so i have to install it from SoftPVR package i have, and add MPEG multiplexer that i have from you. But still no success. TV cannot be turned ON (i click turn on TV and it stays off), when i try to Autocan channels, it tunes right (it gives me the choice to store tuned channel) but the Preview is black. Than i tried to run GraphEdit and build whole graph, except at the end when i was adding MPEG multiplexer i have choosed file to output into, than i have started the graph, waited few seconds and stopped. What was quiet strang, that the file was correct MPEG and contained RIGHT video and audio, so it seems that everything is working. The problem seems to be somewhere agter Multiplexer. If you teke a look on the log there is file mentioned C:\Documents and Settings\petra\Dokumenty\My Recordings\card1\live.tv. If i understand it right, MP records video into file and than it plays it. But this file is never created. The folder card1 is present but is always empty. Any ideas ?

2006-01-24, 18:26	#22 (permalink)
pigster Portal Member Join Date: Jan 2006 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	FINALLY SOLVED new CVS did it. also definition in CVS has changed now you need this package http://hauppauge.lightpath.net/softw...etup_23206.exe BTW, i have PIII 733MHz and it work great (without timeshift amd without recording but it works)

2006-07-23, 15:28	#26 (permalink)
alai Portal User Join Date: Jul 2006 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	sorry, the error message is "unable to create graph for this device!!!" I have the lastest updates of windows (XP home) and media portal and drivers. (the graphic card is Ati x300 pcixpress)

2006-07-23, 15:52	#27 (permalink)
fenomeno83 Portal Member Join Date: Jun 2006 Posts: 13 Thanks: 0 Thanked 0 Times in 0 Posts	WORK!!!!Read: http://forum.team-mediaportal.com/viewtopic.php?t=16525