terratec cinergy dt usb xs diversity

[mardus]

hello, i just buy a new tv card : Terratec cinergy dt usb xs diversity.
and MP not recognize this video card.

I'll try with graph edit this is the image


and i wrote in the file capturecarddefintions.xml

<capturecard commercialname="Cinergy DT USB XS Diversity (Tuner 1)" capturename="cinergy dt usb xs diversity digital capture (Dev1 Path0)" devid="vid_0ccd&amp;pid_005a">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"/>
<tv>
<interface cat="capture" video="2" audio="3" mpeg2="1" sectionsandtables="5"/>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"/>
<filter cat="tunerdevice" name="cinergy dt usb xs diversity digital tuner (Dev1 Path0)" checkdevice="true"/>
<filter cat="capture" name="cinergy dt usb xs diversity digital receiver (Dev1 Path0)" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"/>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
</connections>
</tv>
</capturecard>

is still not working.
Somebody to help me. any ideas are welcome

[finn]

I added the following entry to CaptureCardDefinitions.xml

<capturecard commercialname="Cinergy DT USB XS Diversity (Antenna 1)" capturename="Cinergy DT USB XS Diversity Digital Capture (Dev1 Path0)" devid="vid_0ccd&amp;pid_005a">
<capabilities tv="true" radio="false" mpeg2="true" mce="false" sw="false" bda="true"/>
<tv>
<interface cat="capture" video="2" audio="3" mpeg2="1" sectionsandtables="5"/>
<filters>
<filter cat="networkprovider" name="Microsoft DVBT Network Provider" checkdevice="false"/>
<filter cat="tunerdevice" name="Cinergy DT USB XS Diversity Digital Tuner (Dev1 Path0)" checkdevice="true"/>
<filter cat="capture" name="Cinergy DT USB XS Diversity Digital Capture (Dev1 Path0)" checkdevice="true"/>
</filters>
<connections>
<connection sourcefilter="networkprovider" sourcepin="0" sinkfilter="tunerdevice" sinkpin="0"/>
<connection sourcefilter="tunerdevice" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
</connections>
</tv>
</capturecard>
</capturecards>

But when I try to configure the card I get a failed to draw graph error message I've pasted the relevant section of the log minus the leading "Timestamp [Info.][Config Main]: " of each line

device:Cinergy DT USB XS Diversity Digital Capture (Dev1 Path0) id:@device:pnp:\\?\usb#vid_0ccd&pid_005a#061002001 940#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\cinergy dt usb xs diversity digital capture (dev1 path0)
device:Cinergy DT USB XS Diversity Digital Capture (Dev1 Path1) id:@device:pnp:\\?\usb#vid_0ccd&pid_005a#061002001 940#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\cinergy dt usb xs diversity digital capture (dev1 path1)
Adding name:Cinergy DT USB XS Diversity (Antenna 1) id:vid_0ccd&pid_005a type:Digital_BDA
TVCapture.CreateGraph() Card:1
DVBGraphBDA:CreateGraph().
key:SYSTEM\CurrentControlSet\Enum\PCI\vid_0ccd&pid _005a\061002001940
LoadDefs for device at
key:SYSTEM\CurrentControlSet\Enum\PCI\vid_0ccd&pid _005a\061002001940
defs loaded for device at
video device moniker :@device:pnp:\\?\usb#vid_0ccd&pid_005a#06100200194 0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\cinergy dt usb xs diversity digital capture (dev1 path0)
captureDeviceDeviceName:@device:pnp:\\?\usb#vid_0c cd&pid_005a#061002001940
FindInstance:@device:pnp:\\?\usb#vid_0ccd&pid_005a #061002001940
key:SYSTEM\CurrentControlSet\Enum\usb\vid_0ccd&pid _005a\061002001940
serviceName:mod7700
key:SYSTEM\CurrentControlSet\Services\mod7700\Enum
Number of cards:1
card#0=USB#Vid_0ccd&Pid_005a#061002001940
using card:#0
Using card#0
filter networkprovider='Microsoft DVBT Network Provider' check:False
filter tunerdevice='cinergy dt usb xs diversity digital tuner (dev1 path0)' check:True
Filter tunerdevice not found in definitions file

What does "tunerdevice not found in definitions file" mean?
Any thoughts clues, I based the xml entries on the Pinnacle diversity receiver entries. I also drew a similar graph to the one drawn by mardus to confirm pin numbers and filter names.

[finn]

Note the diversity control filter, which I'm not sure what to do with...

[Tento]

I have the same TV-card. I tested the settings below from finn, but got the same graph error when starting "My TV".

So, I tried to render a graph on myself. But it does not work.

I followed this explanation, but at point 7 nothing is automatically built but only one field: Input TS Feed. What is that?

Does anybody know, why I do not get a graph with a demultiplexer?

Bye,
Tento

[finn]

I think I've identified the problem, I've downloaded the code but don't have a developer environment installed to attempt to compile it. I started looking in my log at two lines

key:SYSTEM\CurrentControlSet\Enum\PCI\vid_0ccd&pid _005a\061002001940
defs loaded for device at

Looking at my registry the key should be

key:SYSTEM\CurrentControlSet\Enum\USB\vid_0ccd&pid_005a\061002001940

The key in question is defined in the function GetHardwareLocation in the GraphHelper.cs source file.

registryKeyName = @"SYSTEM\CurrentControlSet\Enum\PCI\" + mid;

How is this supposed to work?

Please, help...

[Tento]

Perhaps it uses the value of the Key HardwareID, which begins with "USB/Vid..."

USB\Vid_0ccd&Pid_005a&Rev_0001
USB\Vid_0ccd&Pid_005a

[dman_lfc]

try svn 13125 or later

If it still does not work email me the capturecard.xml file.

DMAN

[midiboy]

Hi !

The card works with the recent SVN versions, however only one of the two tuners is found. Is there a way to use the card in dual tuner mode ?

Thanks,
Alex

[Jendral]

Hello,
i'm using the terratec card too. Can you send me the capturecard.xml file to my email adress so i can use it? Thanks a lot, dirk

[michl4ever]

Hello
I downloaded the current Version of Media Portal (0.2.2.0) and added to the CaptureCard xml:

<capturecard commercialname="Terratec Cinergy DT USB XS Diversity  
1" capturename="Cinergy DT USB XS Diversity Digital Capture (Dev1 
Path0)" devid="vid_0ccd&amp;pid_005a">
     <capabilities tv="true" radio="false" mpeg2="true" mce="false" 
sw="false" bda="true"/>
     <tv>
       <interface cat="capture" video="2" audio="3" mpeg2="1" 
sectionsandtables="5"/>
       <filters>
         <filter cat="networkprovider" name="Microsoft DVBT Network 
Provider"                          checkdevice="false"/>
         <filter cat="tunerdevice"     name="Cinergy DT USB XS Diversity 
Digital Tuner (Dev1 Path0) "  checkdevice="true"/>
         <filter cat="capture"         name="Cinergy DT USB XS Diversity 
Digital Capture (Dev1 Path0)" checkdevice="true"/>
       </filters>
       <connections>
         <connection sourcefilter="networkprovider"  sourcepin="0" 
sinkfilter="tunerdevice"  sinkpin="0"/>
         <connection sourcefilter="tunerdevice"      sourcepin="0" 
sinkfilter="capture"      sinkpin="0"/>
       </connections>
     </tv>
   </capturecard>
   <capturecard commercialname="Terratec Cinergy DT USB XS Diversity 
 2" capturename="Cinergy DT USB XS Diversity Digital Capture (Dev1 
Path1)" devid="vid_0ccd&amp;pid_005a">
     <capabilities tv="true" radio="false" mpeg2="true" mce="false" 
sw="false" bda="true"/>
     <tv>
       <interface cat="capture" video="2" audio="3" mpeg2="1" 
sectionsandtables="5"/>
       <filters>
         <filter cat="networkprovider" name="Microsoft DVBT Network 
Provider"                          checkdevice="false"/>
         <filter cat="tunerdevice"     name="Cinergy DT USB XS Diversity 
Digital Tuner (Dev1 Path0) "  checkdevice="true"/>
         <filter cat="capture"         name="Cinergy DT USB XS Diversity 
Digital Capture (Dev1 Path0)" checkdevice="true"/>
       </filters>
       <connections>
         <connection sourcefilter="networkprovider"  sourcepin="0" 
sinkfilter="tunerdevice"  sinkpin="0"/>
         <connection sourcefilter="tunerdevice"      sourcepin="0" 
sinkfilter="capture"      sinkpin="0"/>
       </connections>
     </tv>
   </capturecard>

So I was able to configure the 2 cards. The problem now, is that when i try to record two movies simultanously I get two movie files but both are only one second long and you can hear only strange noise and the picture is very weired too?
If I watch on the two cards seperately everything works fine. Also one recording and another watching is NOT possible because after some seconds the "watching" stops and the same strange noise and picture appears like in the recordings ... do I missing a configuration?

thx for any replies

lg Michael Bösendorfer