Tuners busy with Dvico FusionHDTV Dual recording

catch22 · 2006-07-23, 16:45

Area: Media Portal Program
MediaPortal Version: 0.2.0.0 (2006-07-10)
MediaPortal Skin: MCE
Windows Version: Windows XP (SP2)
.NET CLR Version: 2.0.50727
DirectX Version: 4.09.00.0904 (9.0c)
Audio Codec: MPA Decoder Filter
Video Codec: MPV Decoder Filter
CPU Type: Intel Pentium D - 3.00GHz
Memory: 1 GB
Motherboard: P5LD2 (ASUSTeK Computer INC.)
TV Card Model: Dvico FusionHDTV Dual
TV Card Type: DVB
TV Card Driver: 3.41.00
Video Card Model: Nvidia Geforce 7600 GS (256 MB)
Video Card Driver: 5.73.22.16.02
Video Card Resolution: 720x576
Video Render Type: ?
Audio Card Model: Realtek High Definition Audio
Audio Card Driver: 5.10.0.5125
Synopsis::

I cannot record one channel and watch another. I get a "All tuners busy" error when I try this. I have installed the fix for this issue at http://forum.team-mediaportal.com/viewtopic.php?t=13996. But I still get the problem.

Callifo · 2006-07-23, 17:41

The card shows up as 2 cards inside configuration?

Have you double checked that those new files have remained registered?

Paranoid Delusion · 2006-07-23, 18:16

also tune them in seperately using MP setup Television/capture cards/edit and then go to channels and hit the combine button, The mod that you have done for replacing the two system files i extract to the teammediaportal folder and run the bat file from there (the folder never get deleted so they are always there).

Alconja · 2006-07-24, 04:04

I've got the same card & I had a problem getting both tuners to work when using the internal USB connector cable. I gave up & used the external USB connector & everything worked fine (without needing any special configuration).

DocSens · 2006-07-24, 07:57

I also recently had this problem. For me it turned out that simply no channels where assigned to the second card. So check in MP configuration -> Television -> TV-channels -> TV cards if you have assigned your channels to both cards......

catch22 · 2006-07-24, 16:27

Assigning the channels to the other tuner did the trick thanks for the help everybody. I guess if I had applied the patches first and then installed MP it would have sorted it out properly??

Thanks again. MP is the business!

Callifo · 2006-07-24, 17:00

Quote:

Assigning the channels to the other tuner did the trick thanks for the help everybody. I guess if I had applied the patches first and then installed MP it would have sorted it out properly??

I dont think so, as if you use the wizard, it will only tune using the first tuner it detects. If you tune by configuration, you would have to tune using both cards (or manually assign).

2006-07-23, 16:45	#1 (permalink)
catch22 Portal Member Join Date: May 2006 Location: Sydney, Australia Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts	Tuners busy with Dvico FusionHDTV Dual recording Area: Media Portal Program MediaPortal Version: 0.2.0.0 (2006-07-10) MediaPortal Skin: MCE Windows Version: Windows XP (SP2) .NET CLR Version: 2.0.50727 DirectX Version: 4.09.00.0904 (9.0c) Audio Codec: MPA Decoder Filter Video Codec: MPV Decoder Filter CPU Type: Intel Pentium D - 3.00GHz Memory: 1 GB Motherboard: P5LD2 (ASUSTeK Computer INC.) TV Card Model: Dvico FusionHDTV Dual TV Card Type: DVB TV Card Driver: 3.41.00 Video Card Model: Nvidia Geforce 7600 GS (256 MB) Video Card Driver: 5.73.22.16.02 Video Card Resolution: 720x576 Video Render Type: ? Audio Card Model: Realtek High Definition Audio Audio Card Driver: 5.10.0.5125 Synopsis:: I cannot record one channel and watch another. I get a "All tuners busy" error when I try this. I have installed the fix for this issue at http://forum.team-mediaportal.com/viewtopic.php?t=13996. But I still get the problem.

2006-07-23, 18:16	#3 (permalink)
Paranoid Delusion Super Moderator Join Date: Jun 2005 Location: Cheshire UK Posts: 7,033 Thanks: 139 Thanked 257 Times in 228 Posts Country: My System	also tune them in seperately using MP setup Television/capture cards/edit and then go to channels and hit the combine button, The mod that you have done for replacing the two system files i extract to the teammediaportal folder and run the bat file from there (the folder never get deleted so they are always there). __________________ Ray\PD Check your codecs are fine with Filmerit. Upload Logs\Pictures etc, use the "Go Advanced" and select the + feature to upload\attach files.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TV recording question/problem	'Arry	Installation, configuration support	9	2006-09-22 14:14
Recording from TV	'Arry	General Support	2	2006-09-20 01:12
Channelswitching before recording doesn't work	Bullseye	General Support	0	2006-07-19 08:04
DVico Fusion DVB-T Plus fails to create graph	gora	Installation, configuration support	4	2006-06-29 12:57
Blue screen when recording changes from 2 channels to 1	Brocklander	General Support	15	2006-01-16 00:26

2006-07-23, 17:41	#2 (permalink)
Callifo Retired Team Member Join Date: Dec 2004 Location: Adelaide, Australia Age: 22 Posts: 1,444 Thanks: 0 Thanked 12 Times in 1 Post Country: My System	The card shows up as 2 cards inside configuration? Have you double checked that those new files have remained registered?

2006-07-24, 04:04	#4 (permalink)
Alconja Portal Member Join Date: Jul 2006 Location: Sydney, Australia Posts: 17 Thanks: 0 Thanked 0 Times in 0 Posts	I've got the same card & I had a problem getting both tuners to work when using the internal USB connector cable. I gave up & used the external USB connector & everything worked fine (without needing any special configuration).

2006-07-24, 07:57	#5 (permalink)
DocSens Portal Member Join Date: May 2006 Location: Bremerhaven (Germany) Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts	I also recently had this problem. For me it turned out that simply no channels where assigned to the second card. So check in MP configuration -> Television -> TV-channels -> TV cards if you have assigned your channels to both cards......

2006-07-24, 16:27	#6 (permalink)
catch22 Portal Member Join Date: May 2006 Location: Sydney, Australia Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts	Assigning the channels to the other tuner did the trick thanks for the help everybody. I guess if I had applied the patches first and then installed MP it would have sorted it out properly?? Thanks again. MP is the business!