Twinhan Comhem

djohansson · 2006-10-16, 12:48

Hi,

I have recently built my own HTPC and installed mediaportal. Overall I am extremely satisfied with it, good work.

Yesterday I downloaded the latest svn build and got my tv working. Superhappy about that!

However I still have some issues. I have a twinhan cab-ci 2033 cable card.

1. Some channels work for a few seconds and then freezes (SVT and TV4)
2. Audio don't work on most channels. I use AC3 and output through optical SPDIF

If someone can help me with these issues I would be very pleased. Then everything would work!

Thanks in advance!

Joystud · 2006-10-16, 23:55

Quote:

Originally Posted by djohansson

1. Some channels work for a few seconds and then freezes (SVT and TV4)
2. Audio don't work on most channels. I use AC3 and output through optical SPDIF

If someone can help me with these issues I would be very pleased. Then everything would work!

Hi,

Not much of a solution, but that exact setup works fine for me since a couple of svns. So, if I were you I would check signal quality first.

If you have the Twinhan software installed, does these channels work better there?

dhanjel · 2006-10-17, 07:24

Have the same card and comhem and as with you, the channel switching between mtv / discovery (for example) and svt / comhem takes approx. 10 seconds instead of the usual 2-3 second delay. Sometimes it freezes as well but usually it helps to disable the timeshifting buffer.

My sounds works fine through digital SPDIF, havn't tried any broadcasts with surround sound though.

Joystud · 2006-10-17, 08:55

Could you post your installation details using this template?

READ THIS: Hardware Support Template

djohansson · 2006-10-17, 11:37

MediaPortal Version: 0.2.0.0 with latest svn build
Windows Version: Windows XP professional SP2
CPU Type: Athlon 3500
HDD: Seagate 300Gb
Memory: 2x512Mb
Motherboard: MSI
Video Card: Geforce 7600GS
Video Card Driver: Latest
Sound Card: Realtek
1. TV Card: TWinhanCab-CI Mantis 2033
1. TV Card Type: DVB-C
1. TV Card Driver: Twinhan BDA latest
Satelite/CableTV Provider: Comhem
HTPC Case: Silverstone LC13
Remote: Microsoft MCE remote
TV: LG42 PM1MA
TV - HTPC Connection: DVI-HDMI

Here are my details as I can recall them from memory. With the twinhan software i get sound working properly on all channels but I still have SVT and TV4 freezing after a few seconds. Signal strength is no problem judging from the channel scan.

Joystud · 2006-10-17, 12:04

You have two separate and probably unrelated problems here:
1) SVT and TV4 freezing after a few seconds
2) No sound on SPDIF

1 cannot be solved within the Mediaportal context since it also happens to the Twinhan software. I would think this has to do with the signal strength, possibly trying with a different (shorter and/or better quality) antenna cable could help.

2 sounds like an audio codec problem, which ones do you have setup for this in Mediaportal? HAve you enabled SPDIF passthrough on them?

djohansson · 2006-10-17, 13:52

I will try with a new cable then to see if that works. It is just strange that all other channels work perfectly. All the channels I really pay for works and the FTA like SVT and TV4 doesn't...

With sound it is even more strange since my ac3filter setup works perfectly with music, dvds and videos. It also works for SVT and TV4 until they freezes...

Did you do any special cinfiguration or did you just run channel scan and it worked?

Joystud · 2006-10-17, 17:10

Quote:

Originally Posted by djohansson

the FTA like SVT and TV4 doesn't...

Comhem scrambles the SVT and TV4 channels even though you don't pay for them. Proof for this is that without your card inserterd you won't be able to lock them, whereas the channel CH-kanalen is really FTA and would work without the card.

Quote:

Originally Posted by djohansson

With sound it is even more strange since my ac3filter setup works perfectly with music, dvds and videos. It also works for SVT and TV4 until they freezes...

So you have sound for SVT and TV4 until they freeze, but not for any other channels? I understood your previous messages as you never had sound on TV. Anyway, I don't use ac3filter for my setup. I would need to know more about your setup regarding codec etc from the Mediaportal Configuration program.

Quote:

Originally Posted by djohansson

Did you do any special cinfiguration or did you just run channel scan and it worked?

No special configuration regarding these channels.

djohansson · 2006-10-19, 13:49

I will try with a new antenna cable first and also try different audio codecs. And there is always the new Tv engine that seems to be close now...

Thanks for your input!

Joystud · 2006-10-19, 14:01

No problem, let us know how you solved your problem or come back and provide more details for further troubleshooting.

2006-10-16, 12:48	#1 (permalink)
djohansson Portal Member Join Date: Oct 2006 Location: Stockholm Age: 33 Posts: 78 Thanks: 1 Thanked 28 Times in 3 Posts Country: My System	Twinhan Comhem Hi, I have recently built my own HTPC and installed mediaportal. Overall I am extremely satisfied with it, good work. Yesterday I downloaded the latest svn build and got my tv working. Superhappy about that! However I still have some issues. I have a twinhan cab-ci 2033 cable card. 1. Some channels work for a few seconds and then freezes (SVT and TV4) 2. Audio don't work on most channels. I use AC3 and output through optical SPDIF If someone can help me with these issues I would be very pleased. Then everything would work! Thanks in advance!

2006-10-17, 07:24	#3 (permalink)
dhanjel Portal Member Join Date: Jul 2005 Age: 27 Posts: 86 Thanks: 0 Thanked 1 Time in 1 Post Country: My System	Have the same card and comhem and as with you, the channel switching between mtv / discovery (for example) and svt / comhem takes approx. 10 seconds instead of the usual 2-3 second delay. Sometimes it freezes as well but usually it helps to disable the timeshifting buffer. My sounds works fine through digital SPDIF, havn't tried any broadcasts with surround sound though. __________________ My HTPC: http://minhembio.com/dhanjel/37468/

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can't Load TV Channels	theitalianone	Installation, configuration support	0	2006-08-09 00:18
ATI Wonder Elite- media protal crashes at channel scan	ptighe	General Support	2	2006-06-14 12:14
Shuttering pic. when looking at TV	bigal	General Support	28	2006-03-05 12:12
Win2003 + TwinHan DVB-T = Unable to create graph.	Stor-Anders	General Support	1	2005-12-19 12:10
Twinhan DVB-C ComHem	Yakari	General Support	19	2005-11-02 01:17

2006-10-17, 08:55	#4 (permalink)
Joystud Portal Member Join Date: Oct 2006 Location: Stockholm Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Could you post your installation details using this template? READ THIS: Hardware Support Template

2006-10-17, 11:37	#5 (permalink)
djohansson Portal Member Join Date: Oct 2006 Location: Stockholm Age: 33 Posts: 78 Thanks: 1 Thanked 28 Times in 3 Posts Country: My System	MediaPortal Version: 0.2.0.0 with latest svn build Windows Version: Windows XP professional SP2 CPU Type: Athlon 3500 HDD: Seagate 300Gb Memory: 2x512Mb Motherboard: MSI Video Card: Geforce 7600GS Video Card Driver: Latest Sound Card: Realtek 1. TV Card: TWinhanCab-CI Mantis 2033 1. TV Card Type: DVB-C 1. TV Card Driver: Twinhan BDA latest Satelite/CableTV Provider: Comhem HTPC Case: Silverstone LC13 Remote: Microsoft MCE remote TV: LG42 PM1MA TV - HTPC Connection: DVI-HDMI Here are my details as I can recall them from memory. With the twinhan software i get sound working properly on all channels but I still have SVT and TV4 freezing after a few seconds. Signal strength is no problem judging from the channel scan.

2006-10-17, 12:04	#6 (permalink)
Joystud Portal Member Join Date: Oct 2006 Location: Stockholm Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country:	You have two separate and probably unrelated problems here: 1) SVT and TV4 freezing after a few seconds 2) No sound on SPDIF 1 cannot be solved within the Mediaportal context since it also happens to the Twinhan software. I would think this has to do with the signal strength, possibly trying with a different (shorter and/or better quality) antenna cable could help. 2 sounds like an audio codec problem, which ones do you have setup for this in Mediaportal? HAve you enabled SPDIF passthrough on them?

2006-10-17, 13:52	#7 (permalink)
djohansson Portal Member Join Date: Oct 2006 Location: Stockholm Age: 33 Posts: 78 Thanks: 1 Thanked 28 Times in 3 Posts Country: My System	I will try with a new cable then to see if that works. It is just strange that all other channels work perfectly. All the channels I really pay for works and the FTA like SVT and TV4 doesn't... With sound it is even more strange since my ac3filter setup works perfectly with music, dvds and videos. It also works for SVT and TV4 until they freezes... Did you do any special cinfiguration or did you just run channel scan and it worked?

2006-10-19, 13:49	#9 (permalink)
djohansson Portal Member Join Date: Oct 2006 Location: Stockholm Age: 33 Posts: 78 Thanks: 1 Thanked 28 Times in 3 Posts Country: My System	I will try with a new antenna cable first and also try different audio codecs. And there is always the new Tv engine that seems to be close now... Thanks for your input!

2006-10-19, 14:01	#10 (permalink)
Joystud Portal Member Join Date: Oct 2006 Location: Stockholm Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country:	No problem, let us know how you solved your problem or come back and provide more details for further troubleshooting.