Two or more TV cards and the recording

maysider · 2006-09-28, 11:43

I have been searching that for a long time but nowhere is this problem proprer described.

What about I have two or more TV Cards?

1) Is possible to have the 2 (or more) tuners of the two TV cards (with completely the same specification a.e. 2x Hauppauge 1300) assigned to one channel, so I dont need 2x EPG for each channel (named a.e "BBC" and "BBC for recording") and while the programme is beeing recorded can I watch the other programmes? (just to change channel in my list contains a.e. only: BBC, CNN - to both BBC and CNN are assigned the both TV cards of course)

2) Will the "conflict recording analysis" ignore conflicts if the 2 or more TV cards proper divide the tasks if the programmes overlay themselves?

3) Is possible to assign to one channel two or more different TV cards (different tuners of the same kind only analogue or only digital)?

4) Is possible to assign to one channel two or more different TV cards (different tuners of the different kind - both analogue and digital)?

5) Does the one TV card proper record 2 succsessive programmes of one channel if there is set a.e "start 5 minutes before the beginning of the programme; stop 4 minutes after the beginning of the programme"? If the overlaped time is in the both recorded files? (If is the one tream saved twice to a harddisk?) Or if the 2nd file starts 4 minutes later?

6) In the case 5) if I have two (or more) TV cards assigned to the each channel, will this successived programmes be recorded by one TV card?

7) Is possible to set the priorities also for recording? In the case I have two TV cards and only one has mpeg hardware encoder...so would be better to record by the card with HW encoder.

thank a lot

m
__________

MP is great

mbuzina · 2006-09-28, 14:51

1) For Dual DVB Tuners, please scan the forum, a patch from MS is needed, which is only delivered for MCE. Yes you can setup MP that the BBC Channel can be found on any one of your cards (may be more than 2, can be of different type etc.)

2) Conflicts only occur with this scenario if you try to record 3 shows at the same time.

3) Yes

4) Yes

5) With 2 cards you will have both pre & post correctly in both files. With one card this does not work yet, but it should (recognized as an issue already I guess).

6) See explanation for 5: No not yet.

maysider · 2006-09-28, 15:10

Quote:

Originally Posted by mbuzina

...

thx...perfect answer...now to ensure, howto...maybe later

maysider · 2006-10-09, 14:20

And what about the 7. added question?

thx

jawbroken · 2006-10-09, 16:40

Yes, you can set priorities.

Paranoid Delusion · 2006-10-09, 17:25

And do not forget to combine in MPsetup\TV\channels, otherwise will not record on other card.

Ray

2006-09-28, 11:43	#1 (permalink)
maysider Portal Member Join Date: Feb 2006 Location: Zlin Posts: 172 Thanks: 2 Thanked 0 Times in 0 Posts Country:	Two or more TV cards and the recording I have been searching that for a long time but nowhere is this problem proprer described. What about I have two or more TV Cards? 1) Is possible to have the 2 (or more) tuners of the two TV cards (with completely the same specification a.e. 2x Hauppauge 1300) assigned to one channel, so I dont need 2x EPG for each channel (named a.e "BBC" and "BBC for recording") and while the programme is beeing recorded can I watch the other programmes? (just to change channel in my list contains a.e. only: BBC, CNN - to both BBC and CNN are assigned the both TV cards of course) 2) Will the "conflict recording analysis" ignore conflicts if the 2 or more TV cards proper divide the tasks if the programmes overlay themselves? 3) Is possible to assign to one channel two or more different TV cards (different tuners of the same kind only analogue or only digital)? 4) Is possible to assign to one channel two or more different TV cards (different tuners of the different kind - both analogue and digital)? 5) Does the one TV card proper record 2 succsessive programmes of one channel if there is set a.e "start 5 minutes before the beginning of the programme; stop 4 minutes after the beginning of the programme"? If the overlaped time is in the both recorded files? (If is the one tream saved twice to a harddisk?) Or if the 2nd file starts 4 minutes later? 6) In the case 5) if I have two (or more) TV cards assigned to the each channel, will this successived programmes be recorded by one TV card? 7) Is possible to set the priorities also for recording? In the case I have two TV cards and only one has mpeg hardware encoder...so would be better to record by the card with HW encoder. thank a lot m __________ MP is great Last edited by maysider; 2006-10-09 at 14:23. Reason: added question # 7

2006-09-28, 14:51	#2 (permalink)
mbuzina Portal Member Join Date: Apr 2005 Location: Germany Age: 34 Posts: 459 Thanks: 1 Thanked 2 Times in 2 Posts Country:	1) For Dual DVB Tuners, please scan the forum, a patch from MS is needed, which is only delivered for MCE. Yes you can setup MP that the BBC Channel can be found on any one of your cards (may be more than 2, can be of different type etc.) 2) Conflicts only occur with this scenario if you try to record 3 shows at the same time. 3) Yes 4) Yes 5) With 2 cards you will have both pre & post correctly in both files. With one card this does not work yet, but it should (recognized as an issue already I guess). 6) See explanation for 5: No not yet. __________________ * Power is nothing without control *

2006-10-09, 17:25	#6 (permalink)
Paranoid Delusion Super Moderator Join Date: Jun 2005 Location: Cheshire UK Posts: 6,637 Thanks: 129 Thanked 235 Times in 209 Posts Country: My System	And do not forget to combine in MPsetup\TV\channels, otherwise will not record on other card. Ray __________________ Ray\PD Check your codecs are fine with Filmerit. XP\Vista known issues FOR FULL SUPPORT PLEASE GIVE USER SPECIFICATIONS AND RELEVANT LOG's as per HERE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2006-10-09, 14:20	#4 (permalink)
maysider Portal Member Join Date: Feb 2006 Location: Zlin Posts: 172 Thanks: 2 Thanked 0 Times in 0 Posts Country:	And what about the 7. added question? thx

2006-10-09, 16:40	#5 (permalink)
jawbroken Portal Member Join Date: Aug 2005 Location: Melbourne, Australia Age: 22 Posts: 707 Thanks: 0 Thanked 0 Times in 0 Posts My System	Yes, you can set priorities.