Unable to create graph for this device

[blueuniverse]

I've just installed my new Twinham Ter D+A DVB-T card in my PC to replace my old pathetic, hauppauge one from last century. Anyway, I went to the configuration thing and I'm getting this error.

"Unable to create graph for this device"

This then removes the autotune button. I think I managed to get the button there once but I was told that it didn't support autotuning (it does).

Did a search on google for this and I came up with the following fix

"regsvr32 mpeg2data.ax"

Not much luck there. The command worked fine and I got the message box up saying it worked - it just made no effect on the program.


Other things
I don't get this when selecting the analogue tuner on the card. This only happens if I select DTV-DVB 3054 Digital TS Capture.
I'm using XP SP2, the BDA drivers which came with the card and version 0.1.3.0 of mediaportal.


If there's a solution, I'd be incredibly grateful if you could tell me about it.

Thanks,
Ed

[blueuniverse]

Any ideas?

[scoop]

Hi,

Please fill in the support template, so we know what drivers etc. you're using. Also post your mediaportal.log. It should contain a more specific error why it can't detect your card. Please make sure you use BDA drivers for your DVB card.

Kind regards,
Michel

[blueuniverse]

Area: Media Portal Setup
MP Version: 0.1.3.0
Skin: MPBlue
Windows Version: XP SP2
CPU Type: AMD 2500+ 1.83ghz
Memory: 768mb DDR SDRAM pc2700
Motherboard Chipset: Via KT400
Video Card: Leadtek Geforce FX 5600 256mb
Video Card Driver: 81.94
Video Card Resolution: 1280x1024
Video Render Type: VMR9
Video Codec Type & Version: Not relevant but XVid 4
Audio Codec Type & Version: Not relevant but Mpeg3
TV Card: Twinham Ter D+A
TV Card Type: DVB-T/analogue with hardware and software encoding
TV Card Driver: Tried with v1.0.1.5 (whql) and 1.0.1.7 - BDA drivers
Optional Log:

16/11/2005 13:25:26 Load settings done
16/11/2005 13:26:12 deviceTV-DVB 3054 Analog Video Capture id:@device:pnp:\\?\pci#ven_14f1&dev_8800&subsys_00 191822&rev_05#3&61aaa01&0&68#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
16/11/2005 13:26:12 devicemartCam id:@device:pnp:\\?\usb#vid_0c45&pid_602a#5&29c90e1 d&0&1#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
16/11/2005 13:26:12 deviceTV-DVB 3054 Digital TS Capture id:@device:pnp:\\?\pci#ven_14f1&dev_8802&subsys_00 191822&rev_05#3&61aaa01&0&6a#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5ea9c066-1dfe-41c5-a2de-bf766e83c98e}
16/11/2005 13:26:12 Found capture #0 cardTV-DVB 3054 Analog Video Capture moniker:@device:pnp:\\?\pci#ven_14f1&dev_8800&subs ys_00191822&rev_05#3&61aaa01&0&68#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
16/11/2005 13:26:12 Found capture #1 cardmartCam moniker:@device:pnp:\\?\usb#vid_0c45&pid_602a#5&29 c90e1d&0&1#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\global
16/11/2005 13:26:12 Found capture #2 cardTV-DVB 3054 Digital TS Capture moniker:@device:pnp:\\?\pci#ven_14f1&dev_8802&subs ys_00191822&rev_05#3&61aaa01&0&6a#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\{5ea9c066-1dfe-41c5-a2de-bf766e83c98e}
16/11/2005 13:26:12 Adding name:General S/W encoding card captureTV-DVB 3054 Analog Video Capture id:s/w bda:False mce:False mpeg2:False
16/11/2005 13:26:12 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:12 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:12 Card:1 CreateGraph
16/11/2005 13:26:12 SWGraph:GetCompressors() find video compressor filter XviD MPEG-4 Codec...
16/11/2005 13:26:12 SWGraph:GetCompressors() find audio compressor filter MPEG Layer-3...
16/11/2005 13:26:12 SWGraph:GetCompressors() using mpeg2 compressors:False
16/11/2005 13:26:12 SWGraph:CreateGraph()
16/11/2005 13:26:12 SWGraph:create new filter graph (IGraphBuilder)
16/11/2005 13:26:12 SWGraph:Get the Capture Graph Builder (ICaptureGraphBuilder2)
16/11/2005 13:26:12 SWGraph:Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
16/11/2005 13:26:12 SWGraph:Add graph to ROT table
16/11/2005 13:26:13 SWGraph:CreateGraph() add capture device DTV-DVB 3054 Analog Video Capture
16/11/2005 13:26:13 SWGraph:CreateGraph() add capture device Realtek AC97 Audio
16/11/2005 13:26:13 SWGraph:Find TV Tuner
16/11/2005 13:26:14 SinkGraphelect tvformatAL_B
16/11/2005 13:26:14 VideoCaptureDevice:ctor
16/11/2005 13:26:14 VideoCaptureDevice:Found preview pin
16/11/2005 13:26:14 VideoCaptureDevice:Found capture pin
16/11/2005 13:26:14 capture:found video preview pin
16/11/2005 13:26:14 capture:found video capture pin
16/11/2005 13:26:14 crossbar routing exceptionystem.Runtime.InteropServices.InvalidCo mObjectException: COM object that has been separated from its underlying RCW can not be used.
at DShowNET.ICaptureGraphBuilder2.FindInterface(Guid[] pCategory, Guid[] pType, IBaseFilter pbf, Guid& riid, Object& ppint)
at DShowNET.DsUtils.FixCrossbarRouting(IGraphBuilder graphbuilder, ICaptureGraphBuilder2 m_captureGraphBuilder, IBaseFilter captureFilter, Boolean useTuner, Boolean useCVBS1, Boolean useCVBS2, Boolean useSVHS, Boolean useRgb, Boolean logActions)
16/11/2005 13:26:14 capture:look for pin 656 (PVR150)
16/11/2005 13:26:14 capture:look for pin I2S (WinFast PVR2000)
16/11/2005 13:26:14 capture:found output pin 656 (PVR150)
16/11/2005 13:26:14 capture:adding Encoder filter
16/11/2005 13:26:14 capture:failed:unable to create Encoder
16/11/2005 13:26:14 Card:1 DeleteGraph
16/11/2005 13:26:14 SWGrapheleteGraph()
16/11/2005 13:26:14 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:14 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:14 Card:1 CreateGraph
16/11/2005 13:26:14 SWGraph:GetCompressors() find video compressor filter XviD MPEG-4 Codec...
16/11/2005 13:26:14 SWGraph:GetCompressors() find audio compressor filter MPEG Layer-3...
16/11/2005 13:26:14 SWGraph:GetCompressors() using mpeg2 compressors:False
16/11/2005 13:26:14 SWGraph:CreateGraph()
16/11/2005 13:26:14 SWGraph:create new filter graph (IGraphBuilder)
16/11/2005 13:26:14 SWGraph:Get the Capture Graph Builder (ICaptureGraphBuilder2)
16/11/2005 13:26:14 SWGraph:Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
16/11/2005 13:26:14 SWGraph:Add graph to ROT table
16/11/2005 13:26:14 SWGraph:CreateGraph() add capture device DTV-DVB 3054 Analog Video Capture
16/11/2005 13:26:14 SWGraph:CreateGraph() add capture device Realtek AC97 Audio
16/11/2005 13:26:14 SWGraph:Find TV Tuner
16/11/2005 13:26:14 VideoCaptureDevice:ctor
16/11/2005 13:26:14 VideoCaptureDevice:Found preview pin
16/11/2005 13:26:14 VideoCaptureDevice:Found capture pin
16/11/2005 13:26:14 capture:found video preview pin
16/11/2005 13:26:14 capture:found video capture pin
16/11/2005 13:26:14 crossbar routing exceptionystem.Runtime.InteropServices.InvalidCo mObjectException: COM object that has been separated from its underlying RCW can not be used.
at DShowNET.ICaptureGraphBuilder2.FindInterface(Guid[] pCategory, Guid[] pType, IBaseFilter pbf, Guid& riid, Object& ppint)
at DShowNET.DsUtils.FixCrossbarRouting(IGraphBuilder graphbuilder, ICaptureGraphBuilder2 m_captureGraphBuilder, IBaseFilter captureFilter, Boolean useTuner, Boolean useCVBS1, Boolean useCVBS2, Boolean useSVHS, Boolean useRgb, Boolean logActions)
16/11/2005 13:26:14 capture:look for pin 656 (PVR150)
16/11/2005 13:26:14 capture:look for pin I2S (WinFast PVR2000)
16/11/2005 13:26:14 capture:found output pin 656 (PVR150)
16/11/2005 13:26:14 capture:adding Encoder filter
16/11/2005 13:26:15 capture:failed:unable to create Encoder
16/11/2005 13:26:15 Card:1 DeleteGraph
16/11/2005 13:26:15 SWGrapheleteGraph()
16/11/2005 13:26:15 Adding name:General S/W encoding card capturemartCam id:s/w bda:False mce:False mpeg2:False
16/11/2005 13:26:15 Adding name:General S/W encoding card captureTV-DVB 3054 Digital TS Capture id:s/w bda:False mce:False mpeg2:False
16/11/2005 13:26:15 Adding name:General H/W encoding card captureTV-DVB 3054 Analog Video Capture id:hw bda:False mce:False mpeg2:True
16/11/2005 13:26:15 Adding name:General H/W encoding card capturemartCam id:hw bda:False mce:False mpeg2:True
16/11/2005 13:26:15 Adding name:General H/W encoding card captureTV-DVB 3054 Digital TS Capture id:hw bda:False mce:False mpeg2:True
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 Card:1 CreateGraph
16/11/2005 13:26:15 SWGraph:GetCompressors() find video compressor filter XviD MPEG-4 Codec...
16/11/2005 13:26:15 SWGraph:GetCompressors() find audio compressor filter MPEG Layer-3...
16/11/2005 13:26:15 SWGraph:GetCompressors() using mpeg2 compressors:False
16/11/2005 13:26:15 SWGraph:CreateGraph()
16/11/2005 13:26:15 SWGraph:create new filter graph (IGraphBuilder)
16/11/2005 13:26:15 SWGraph:Get the Capture Graph Builder (ICaptureGraphBuilder2)
16/11/2005 13:26:15 SWGraph:Link the CaptureGraphBuilder to the filter graph (SetFiltergraph)
16/11/2005 13:26:15 SWGraph:Add graph to ROT table
16/11/2005 13:26:15 SWGraph:CreateGraph() add capture device DTV-DVB 3054 Analog Video Capture
16/11/2005 13:26:15 SWGraph:CreateGraph() add capture device Realtek AC97 Audio
16/11/2005 13:26:15 SWGraph:Find TV Tuner
16/11/2005 13:26:15 VideoCaptureDevice:ctor
16/11/2005 13:26:15 VideoCaptureDevice:Found preview pin
16/11/2005 13:26:15 VideoCaptureDevice:Found capture pin
16/11/2005 13:26:15 capture:found video preview pin
16/11/2005 13:26:15 capture:found video capture pin
16/11/2005 13:26:15 crossbar routing exceptionystem.Runtime.InteropServices.InvalidCo mObjectException: COM object that has been separated from its underlying RCW can not be used.
at DShowNET.ICaptureGraphBuilder2.FindInterface(Guid[] pCategory, Guid[] pType, IBaseFilter pbf, Guid& riid, Object& ppint)
at DShowNET.DsUtils.FixCrossbarRouting(IGraphBuilder graphbuilder, ICaptureGraphBuilder2 m_captureGraphBuilder, IBaseFilter captureFilter, Boolean useTuner, Boolean useCVBS1, Boolean useCVBS2, Boolean useSVHS, Boolean useRgb, Boolean logActions)
16/11/2005 13:26:15 capture:look for pin 656 (PVR150)
16/11/2005 13:26:15 capture:look for pin I2S (WinFast PVR2000)
16/11/2005 13:26:15 capture:found output pin 656 (PVR150)
16/11/2005 13:26:15 capture:adding Encoder filter
16/11/2005 13:26:15 capture:failed:unable to create Encoder
16/11/2005 13:26:15 Card:1 DeleteGraph
16/11/2005 13:26:15 SWGrapheleteGraph()
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:15 selected General S/W encoding card bda:False mce:False mpeg2:False
16/11/2005 13:26:18 selected General H/W encoding card bda:False mce:False mpeg2:True
16/11/2005 13:26:18 selected General H/W encoding card bda:False mce:False mpeg2:True
16/11/2005 13:26:18 Card:1 CreateGraph
16/11/2005 13:26:18 SinkGraph:CreateGraph()
16/11/2005 13:26:18 SinkGraph:CreateGraph() FAILED couldnt find capture deviceTV-DVB 3054 Digital TS Capture

Hope this helps.

[scoop]

Hi,

According to this and this page from the wiki your card is currently not supported. Sorry I didn't notice this before; I was looking at the wrong model.

Maybe if you can verify if the DVB part of this card has BDA drivers available somewhere. If yes, then you might be able to get it supported via this link.

Kind regards,
Michel

[blueuniverse]

It's definitely got BDA drivers although they're not specifically listed on the site. They came with the cd though and are installed.


I'll get right on it and submit all that stuff.

Thanks,
Ed