FloppyDTV S2- No channels found

moldina · 2007-09-27, 12:26

My Hardware Setup:
FloppyDTV S2 on a AMD 5000+ EE, 2 GB Ram, ATI HD2600 XT
Latest firmware/dirvers installed for FloppyDTV S2
Signal quality and strength is excellent.

I am located in Austria and heading to Astra 19° C/D/E

DVBViewer: All channels (SDTV and HDTV) working, channel scan success
FireDTV: All channels (SDTV and HDTV) working, channel scan success

I have installed a nigthly build of TV Server (i think the one from monday), tvcard is detected properly.
Update transponder list is working, but channel scan for dedicated transponders without success -> no channels found

Another thread mentioned that my card is properly supported, therefore i have no idea what is going wrong.
Played a lot around with LNB/Diqsec, but no success either. Furthermore I don't think that playing around with this parameters will improve the situation, as DVBViewer and FireDTV Viewer can find all channels without tweaking these parameters

1.) Any idea what is going wrong Maybe the build of TVServer broken with FloppyDTV?
2.) Any suggestions what parameter setup i should use? I'm no DVB-S-Expert, but i think DVBViewer scans with LNB-setting AA, whatever this means...

Although DVBViewer is fine, TVServer and Mediaportal is (technologically and regarding features) my favourite, therefore it would be great if i could get LiveTV running...

Thankx and apologize my poor english....

xper · 2007-09-27, 20:00

Same here, same card, last builds. No signal. Everything fine in other apps.

chrispi · 2007-09-27, 22:39

I use last weekend's SVN buid of the TV Server and the card is working fine here. No problem with HDTV and SDTV.

- Christoph

moldina · 2007-09-27, 22:51

Pretty strange that channel scan is working for you, i will try with the weekend build tomorrow...
Would it be possible to make a screenshot showing your channel scan properties (LNB...) and attach it in a post ?

Thank you

chrispi · 2007-09-27, 23:06

I use the default settings. Nothing special.

SAT#1: Checked
DiSEqC: None
Band: Ku-Lnear
Sattelite: 19.2E Astra HD
Enable DVB-S2 tuning features: Checked

TV-Engine SVN Version is from 23.9.2007.

- Christoph

moldina · 2007-09-28, 09:04

Very strange, I've tried many times with the default settings, but no channels were found.
Ok, i will try the svn-build from 23.9. and the lastest one this evening, hope i can get it working...

Thankx

nyria · 2007-09-28, 12:03

Using the same card over here, on 19.2E. Working without anny problems.

There are some new drivers on the website of digital everywhere.

http://www.digital-everywhere.com/en...sid=1186575943

You can give those a try, make sure you select bda during installation.

moldina · 2007-09-28, 15:49

well, latetst svn-build from this night, scan, no channel found :-(
No idea, latest drivers and firmware for floppydtv...

I've attached the log file of TVServer, maybe anyone has an idea what is going wrong...
A bit confused about log messages, that the special mode properties of floppydtv are set to "notSet"...

Thanx

moldina · 2007-09-28, 16:07

BDA-driver is installed, but again no success.
No idea, i cant get it working...
See attachments for config-screenshot and log for 19E Astra HD-scan...

kabiki · 2007-09-28, 17:38

I got the exact same problem, except that it was concerning the Thor satellite, and reported this in another thread earlier in may. It seems like nothing has been done to get rid of it and it feels like more and more people are getting the same problem. :-( I would so love to be able to use this as my setup cause I really like what the MP team has done so far with Mediaportal and the TVserver, except that I cant get it to work. :-)

2007-09-27, 12:26	#1 (permalink)
moldina Portal Member Join Date: Sep 2007 Age: 32 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	FloppyDTV S2- No channels found My Hardware Setup: FloppyDTV S2 on a AMD 5000+ EE, 2 GB Ram, ATI HD2600 XT Latest firmware/dirvers installed for FloppyDTV S2 Signal quality and strength is excellent. I am located in Austria and heading to Astra 19° C/D/E DVBViewer: All channels (SDTV and HDTV) working, channel scan success FireDTV: All channels (SDTV and HDTV) working, channel scan success I have installed a nigthly build of TV Server (i think the one from monday), tvcard is detected properly. Update transponder list is working, but channel scan for dedicated transponders without success -> no channels found Another thread mentioned that my card is properly supported, therefore i have no idea what is going wrong. Played a lot around with LNB/Diqsec, but no success either. Furthermore I don't think that playing around with this parameters will improve the situation, as DVBViewer and FireDTV Viewer can find all channels without tweaking these parameters 1.) Any idea what is going wrong Maybe the build of TVServer broken with FloppyDTV? 2.) Any suggestions what parameter setup i should use? I'm no DVB-S-Expert, but i think DVBViewer scans with LNB-setting AA, whatever this means... Although DVBViewer is fine, TVServer and Mediaportal is (technologically and regarding features) my favourite, therefore it would be great if i could get LiveTV running... Thankx and apologize my poor english....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mediaportal erkennt FloppyDTV S2 nicht	steve111	Media Portal - Support	9	2007-09-20 10:47
Got the FloppyDTV-S2 in the post today...	pmcguire	General Support	13	2007-09-16 13:19
FloppyDTV-DVB-S2 - no HD channels	Laban	Get Support	1	2007-09-13 07:54
Technotrend S2-3200 vs. FloppyDTV DVB-S2	Griffon	Hardware Selection Help	3	2007-09-11 10:38
No S2 - HD channels found in channelsearch	Laban	General Talk	7	2007-07-14 22:02

2007-09-27, 20:00	#2 (permalink)
xper Portal Member Join Date: Nov 2006 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	Same here, same card, last builds. No signal. Everything fine in other apps.

2007-09-27, 22:39	#3 (permalink)
chrispi Portal Member Join Date: May 2006 Posts: 65 Thanks: 2 Thanked 0 Times in 0 Posts Country:	I use last weekend's SVN buid of the TV Server and the card is working fine here. No problem with HDTV and SDTV. - Christoph

2007-09-27, 22:51	#4 (permalink)
moldina Portal Member Join Date: Sep 2007 Age: 32 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Pretty strange that channel scan is working for you, i will try with the weekend build tomorrow... Would it be possible to make a screenshot showing your channel scan properties (LNB...) and attach it in a post ? Thank you

2007-09-27, 23:06	#5 (permalink)
chrispi Portal Member Join Date: May 2006 Posts: 65 Thanks: 2 Thanked 0 Times in 0 Posts Country:	I use the default settings. Nothing special. SAT#1: Checked DiSEqC: None Band: Ku-Lnear Sattelite: 19.2E Astra HD Enable DVB-S2 tuning features: Checked TV-Engine SVN Version is from 23.9.2007. - Christoph

2007-09-28, 09:04	#6 (permalink)
moldina Portal Member Join Date: Sep 2007 Age: 32 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Very strange, I've tried many times with the default settings, but no channels were found. Ok, i will try the svn-build from 23.9. and the lastest one this evening, hope i can get it working... Thankx

2007-09-28, 12:03	#7 (permalink)
nyria Portal Member Join Date: May 2007 Posts: 31 Thanks: 2 Thanked 2 Times in 2 Posts	Using the same card over here, on 19.2E. Working without anny problems. There are some new drivers on the website of digital everywhere. http://www.digital-everywhere.com/en...sid=1186575943 You can give those a try, make sure you select bda during installation.

2007-09-28, 17:38	#10 (permalink)
kabiki Portal Member Join Date: Apr 2007 Age: 27 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I got the exact same problem, except that it was concerning the Thor satellite, and reported this in another thread earlier in may. It seems like nothing has been done to get rid of it and it feels like more and more people are getting the same problem. :-( I would so love to be able to use this as my setup cause I really like what the MP team has done so far with Mediaportal and the TVserver, except that I cant get it to work. :-)