hauppauge 4000....no dvb-t - Page 2

Mew · 2008-01-17, 22:01

Hi Nemulate

No, my only concern is knowing which one of the 2 DVB-T tuners should be paired with which one of the DVB-S tuners to create a hybrid group. If I remember rightly, the descriptions of each type of tuner are the same so I can't tell which 3 tuners belong to the physical card 1 and which belong to the phyical card 2.

I am sure when I actually come to do it I should be able to sort it out. It may require temporarily removing a HVR-4000 so I know that the 3 tuners left showing in TVE3 all belong to the card left in the PC. I could make that a hybrid group, then add the other card back in and the 3 tuners now not in a hybrid group must belong to that card.

Mew

sasax · 2008-01-22, 12:00

Hi
I have tried tv3 with mysql and last vsn.I have followed the tutorial for the installation and configuration and i have set the card as hybrid card.But when start tv in mediaportal i have some problems.The change channel is much slow and sometimes it crash.Also tv3 setup crash sometimes when i tried the preview the channel.I have hauppauge hvr4000 and windows xp.
Help me

chemelli · 2008-01-22, 12:28

I have an hauppauge 4000 and have DVB-T/S and analog working ( with some issues not specific to hauppauge 4000 in any case).
I'm under Vista32.

Problems:

1) DVB-T from Mediaset(IT) is suffering a DTS/PTS coding issue.
2) DVB-S is not working with my sat-switch for high freq band.
3) Analog works fine only using this great patch: http://forum.team-mediaportal.com/pa...ds-t33290.html

Simone

sasax · 2008-01-22, 17:24

Hi Chemelli,
I try to install the patch.But the pacth function also with the last svn(17122) or no????

chemelli · 2008-01-22, 17:55

I think it will, but please try with the suggested SVN before and verify if you an have a stable working system.

Simone

Mew · 2008-01-22, 23:19

Hi

Remember for analogue you need to install the SoftMCE_Setup.EXE (found in the MCE_soft_encoder folder) from the Hauppauge drivers as this does not install by default.

Mew

sasax · 2008-01-23, 19:24

Hi
I have tried in many ways,but every case the change channel is very slow and many time mp crash.Then i prefer uninstall tv3.In mediaportal without tv3, for swicth (with hvr4000) dvb-t /dvb-s i must exit to mediaportal and to lunch mp config or i can switch in mediaportal????

2008-01-22, 12:28	#13 (permalink)
chemelli Portal Developer Join Date: Sep 2006 Location: Italy - Padova Age: 34 Posts: 1,482 Thanks: 82 Thanked 82 Times in 63 Posts Country: My System	I have an hauppauge 4000 and have DVB-T/S and analog working ( with some issues not specific to hauppauge 4000 in any case). I'm under Vista32. Problems: 1) DVB-T from Mediaset(IT) is suffering a DTS/PTS coding issue. 2) DVB-S is not working with my sat-switch for high freq band. 3) Analog works fine only using this great patch: http://forum.team-mediaportal.com/pa...ds-t33290.html Simone Last edited by chemelli; 2008-01-22 at 12:31.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone using the Hauppauge HVR-4000?	bruizerbg	Newcomers Forum	3	2007-12-19 11:12
Dvb-T mit Hauppauge HVR 4000?	schlitz3r	Software/Codecs Mediaportal	0	2007-11-24 14:30
MP and Hauppauge HVR 4000	Mercedes	support	1	2007-09-18 22:44
Hauppauge hvr 4000 + tvserver?	johnps	General Talk	3	2007-03-10 10:34
Wann wird Hauppauge HVR-4000 unterstützt (für DVB-S2)?	chrisyboy74	Hardware	3	2006-12-17 13:16

2008-01-17, 22:01	#11 (permalink)
Mew Portal Member Join Date: Jan 2007 Location: Hertfordshire Age: 37 Posts: 209 Thanks: 8 Thanked 13 Times in 10 Posts Country: My System	Hi Nemulate No, my only concern is knowing which one of the 2 DVB-T tuners should be paired with which one of the DVB-S tuners to create a hybrid group. If I remember rightly, the descriptions of each type of tuner are the same so I can't tell which 3 tuners belong to the physical card 1 and which belong to the phyical card 2. I am sure when I actually come to do it I should be able to sort it out. It may require temporarily removing a HVR-4000 so I know that the 3 tuners left showing in TVE3 all belong to the card left in the PC. I could make that a hybrid group, then add the other card back in and the 3 tuners now not in a hybrid group must belong to that card. Mew

2008-01-22, 12:00	#12 (permalink)
sasax Portal Member Join Date: Jan 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi I have tried tv3 with mysql and last vsn.I have followed the tutorial for the installation and configuration and i have set the card as hybrid card.But when start tv in mediaportal i have some problems.The change channel is much slow and sometimes it crash.Also tv3 setup crash sometimes when i tried the preview the channel.I have hauppauge hvr4000 and windows xp. Help me

2008-01-22, 17:24	#14 (permalink)
sasax Portal Member Join Date: Jan 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi Chemelli, I try to install the patch.But the pacth function also with the last svn(17122) or no????

2008-01-22, 17:55	#15 (permalink)
chemelli Portal Developer Join Date: Sep 2006 Location: Italy - Padova Age: 34 Posts: 1,482 Thanks: 82 Thanked 82 Times in 63 Posts Country: My System	I think it will, but please try with the suggested SVN before and verify if you an have a stable working system. Simone

2008-01-22, 23:19	#16 (permalink)
Mew Portal Member Join Date: Jan 2007 Location: Hertfordshire Age: 37 Posts: 209 Thanks: 8 Thanked 13 Times in 10 Posts Country: My System	Hi Remember for analogue you need to install the SoftMCE_Setup.EXE (found in the MCE_soft_encoder folder) from the Hauppauge drivers as this does not install by default. Mew

2008-01-23, 19:24	#17 (permalink)
sasax Portal Member Join Date: Jan 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi I have tried in many ways,but every case the change channel is very slow and many time mp crash.Then i prefer uninstall tv3.In mediaportal without tv3, for swicth (with hvr4000) dvb-t /dvb-s i must exit to mediaportal and to lunch mp config or i can switch in mediaportal????