HELP US: Testing the new filter - Page 8

Erbsenkopp · 2007-07-09, 08:57

Hi,

i test again with SVN & TVE3 Rev 15124. I use the Cyberlink Codecs with was bundled at my tv card.

I made multiple tests, somtimes Picture and Sound are o.k., somtimes only scratching and still frames.

I test SD and HD, scrambled and FTA - no difference. Cant say problems only there or there. After 3 or 4 channel changes MP hang up and i have to kill at the task manager.

Preview inside TV3 allways fine.

regards,
Erbsenkopp

Erbsenkopp · 2007-07-09, 09:02

PS: With the new one, i never get the "no audio / video found" massage at the first startup of mp.

Stone · 2007-07-09, 16:01

i have the same results...

kalon · 2007-07-09, 16:37

Quote:

Originally Posted by frodo

svn 15124:
fixed several issues with multi-seat config.

Worked for me now for the first time. Running multiseat and Intervideo codeq for DVB T.
But client hangs when changing channel and I get
"2007-07-09 17:27:34.140625 [ERROR][MPMain]: seek failed->seek to 0 0x:1"
in the error log.

sdf · 2007-07-09, 18:21

Crashes after two channel changes
Single Seat and Vista here

dekkers · 2007-07-09, 20:19

Quote:

Originally Posted by sebastianp

Quote:

Originally Posted by frodo

svn 15124:
fixed several issues with multi-seat config.

Frodo

thanks frodo,

Can you, or someone else who knows, please put together (or point me in the right direction) some short instructions on how to enable the new filter in a multi seat configuration.

I want to make sure I am testing the right thing, thanks

Like the first post sais: make an file and call it UseTsReader.txt??

jaobr · 2007-07-09, 21:38

I've found the reason for stuttery playback of my HD h264 channels.

In FillVideo and FillAudio methods there is the following check

else if (m_pCurrentVideoBuffer->Length()>0)

but somtimes when a ts packet just fills the buffer a new buffer is created
but there is no data left to fill it with so the buffer size is 0. When the
next TS packet is received it will be skiped because the buffer length is 0.

If I remove the m_pCurrentVideoBuffer->Length()>0 check the channels playbacks
fine.

Erbsenkopp · 2007-07-09, 23:55

O.K test again with SVN & TV3 Rev 15133

I start MP in Windows Mode and also TV Server to see wat´s happend.

First of all:
It need 3-4 seconds after timeshift starts in TV Server, to see the picture in MP

With new stream i cant change channels directly. If i try, MP hang up and has to kill in TaskManager. In TV Server i can see Timeshift is running with the new channel.

If i first stop Timeshifting (TV OFF) and select a different channel, MP still alive and i can see the selected channel. But sometimes picture is stuttering sometimes not.

If i select a FTA HD channel, screen stay black. With a scrambled one, i can watch a few seconds and then my PC crash and restart itself.

Without the new stream:
Most of time at the first start, i get the "No Audio/Video found" error. But in TV Server timeshift is running ´till the message.

So all i can see is, TV Server works fine, but MP cant use or communicate correctly with.

regards,
Erbsenkopp

PS: Preview in TV Server allways fine

Krusty · 2007-07-10, 02:06

Using only SD DVB-S channels, works for about 3 channel changes then freezes using server build 15115 and client build 15088 (rest of my system details are in "My System".

Single seat config.

Old filter still working better for me.

daan640 · 2007-07-10, 09:18

I have tried the latest SVN yesterday and I've succeeded using the tsReader.ax for the client. I was able to change channels and skip on the client. There are two things to mention.

Skipping and channel changing is quite slow on the client. The time for changing the channel sometimes is about 10 seconds and skipping can be as long as 5 seconds after the two seconds skip wait timer has expired.

Yesterday the server recorded a program and on the client I was looking around and try to use the DVB-T radio. Choosing one channel causes MP to freeze. I had to reset the client with the hardware button.

2007-07-10, 02:06	#79 (permalink)
Krusty Portal Member Join Date: Jun 2007 Location: Near London, Ontario, Canada Age: 1 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Using only SD DVB-S channels, works for about 3 channel changes then freezes using server build 15115 and client build 15088 (rest of my system details are in "My System". Single seat config. Old filter still working better for me. __________________ "I'm going on a bender to end all benders" - Krusty

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Testing out SVN's and now it won't look in subfolders....	cold_realms	My TVSeries	6	2007-06-19 08:29
Sound file for testing 5.1	laeb66	OffTopic	12	2006-04-28 15:08
Unit testing guidelines	sys	General Development (no feature request here!)	7	2006-01-30 18:50
DVB Testing Results	dman_lfc	General Development (no feature request here!)	53	2004-12-30 10:49

2007-07-09, 08:57	#71 (permalink)
Erbsenkopp Portal Member Join Date: Aug 2006 Age: 42 Posts: 95 Thanks: 0 Thanked 3 Times in 1 Post Country: My System	Hi, i test again with SVN & TVE3 Rev 15124. I use the Cyberlink Codecs with was bundled at my tv card. I made multiple tests, somtimes Picture and Sound are o.k., somtimes only scratching and still frames. I test SD and HD, scrambled and FTA - no difference. Cant say problems only there or there. After 3 or 4 channel changes MP hang up and i have to kill at the task manager. Preview inside TV3 allways fine. regards, Erbsenkopp

2007-07-09, 09:02	#72 (permalink)
Erbsenkopp Portal Member Join Date: Aug 2006 Age: 42 Posts: 95 Thanks: 0 Thanked 3 Times in 1 Post Country: My System	PS: With the new one, i never get the "no audio / video found" massage at the first startup of mp.

2007-07-09, 16:01	#73 (permalink)
Stone Portal Member Join Date: Mar 2007 Age: 38 Posts: 58 Thanks: 0 Thanked 1 Time in 1 Post	i have the same results...

2007-07-09, 18:21	#75 (permalink)
sdf Portal Member Join Date: Sep 2006 Posts: 104 Thanks: 1 Thanked 0 Times in 0 Posts Country:	Crashes after two channel changes Single Seat and Vista here

2007-07-09, 21:38	#77 (permalink)
jaobr Portal Member Join Date: Nov 2006 Posts: 15 Thanks: 0 Thanked 0 Times in 0 Posts	I've found the reason for stuttery playback of my HD h264 channels. In FillVideo and FillAudio methods there is the following check else if (m_pCurrentVideoBuffer->Length()>0) but somtimes when a ts packet just fills the buffer a new buffer is created but there is no data left to fill it with so the buffer size is 0. When the next TS packet is received it will be skiped because the buffer length is 0. If I remove the m_pCurrentVideoBuffer->Length()>0 check the channels playbacks fine.

2007-07-09, 23:55	#78 (permalink)
Erbsenkopp Portal Member Join Date: Aug 2006 Age: 42 Posts: 95 Thanks: 0 Thanked 3 Times in 1 Post Country: My System	O.K test again with SVN & TV3 Rev 15133 I start MP in Windows Mode and also TV Server to see wat´s happend. First of all: It need 3-4 seconds after timeshift starts in TV Server, to see the picture in MP With new stream i cant change channels directly. If i try, MP hang up and has to kill in TaskManager. In TV Server i can see Timeshift is running with the new channel. If i first stop Timeshifting (TV OFF) and select a different channel, MP still alive and i can see the selected channel. But sometimes picture is stuttering sometimes not. If i select a FTA HD channel, screen stay black. With a scrambled one, i can watch a few seconds and then my PC crash and restart itself. Without the new stream: Most of time at the first start, i get the "No Audio/Video found" error. But in TV Server timeshift is running ´till the message. So all i can see is, TV Server works fine, but MP cant use or communicate correctly with. regards, Erbsenkopp PS: Preview in TV Server allways fine

2007-07-10, 09:18	#80 (permalink)
daan640 Portal Member Join Date: Dec 2006 Age: 43 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	I have tried the latest SVN yesterday and I've succeeded using the tsReader.ax for the client. I was able to change channels and skip on the client. There are two things to mention. Skipping and channel changing is quite slow on the client. The time for changing the channel sometimes is about 10 seconds and skipping can be as long as 5 seconds after the two seconds skip wait timer has expired. Yesterday the server recorded a program and on the client I was looking around and try to use the DVB-T radio. Choosing one channel causes MP to freeze. I had to reset the client with the hardware button.