Cant watch with HVR-1100V.

ray076NL · 2008-10-14, 21:57

TV-Server Version: Latest
MediaPortal Version: 1.0RC3
MediaPortal Skin: blue 2
Windows Version: Win xp x86, SP3.
CPU Type: VIA C7
HDD: WD caviar-GP 500GB.
Memory: 1GB
Motherboard: VIA EPIA EX15000G
Video Card: VIA
Video Card Driver:
Sound Card: VIA
Sound Card AC3:
Sound Card Driver:
1. TV Card: Hauppauge HVR-1100V
1. TV Card Type: DVB-T and Analog
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider: UPC Netherlands
HTPC Case: Procase NOAH
Cooling:
Power Supply:
Remote: Hauppauge
TV:
TV - HTPC Connection: S-video, DVI, D-sub, composite, component.

Hi, I tried to activate my tv-card this week, all went well untill I tried to preview a channel.
Scanning goes well and no problems with that, all channels are present; but than trying to preview gives the following message: NoVideoAudioDetected. strange. Does somebody knows what the problem is, or are those cards just not supported yet? (allthough it is stated in the wiki that they are) The channels aren't watchable in mediaportel either.

I included log-files for the tv-server.
Greetings, ray076NL

ray076NL · 2008-10-22, 13:16

I guess nobody has an answer.

raas · 2008-10-22, 19:16

Hi,

I have the same problem with the HVR900 (analog part) although it's supposed to work.

ray076NL · 2008-10-22, 20:06

Thanks for your answer.
It just should work, it stands in the wiki that those cards are supported by the tv-server.
I guess it is the tv-server that's buggy (no offense to the programmers), in some way it doesn't do what it is supposed to do and somewhere something is going wrong.

I can offer one of my cards for testing purposes to one of the programmers here, if they want to.

ray076NL · 2008-10-31, 18:57

I still have the problem, does anyone have the solution?

samoddie · 2008-11-28, 14:36

I had the same problem and played around with my codecs, I currently have mpa and mpv decoders and I now I get a great picture.

However, I am stuck on channel switching now though - "cannot start timeshift card in use". I start up tv as normal, begin watching a channel but then when i change I get that error and it stays on the same channel...

So, yeah have a play with your codecs and see if that does anything. I selected a codec, tested and if it didn't work i selected another until i found the ones that worked - mpa and mpv...

Hope this helps

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Test bugfix for HVR-4000 and HVR-2200 analog part	misterd	Development	22	2008-12-10 18:30
Watch HD with this?	jerbob92	Hardware Selection Help	7	2008-08-06 18:19
I can't watch TV	Killerkrabs	support	1	2007-10-25 15:57
Can't watch tv	raedts	General Support	7	2007-09-22 21:54
Not able to watch all channels	jba6511	General Support	1	2007-05-27 22:45

2008-10-22, 13:16	#2 (permalink)
ray076NL Portal Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I guess nobody has an answer.

2008-10-22, 19:16	#3 (permalink)
raas Portal Member Join Date: Oct 2008 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi, I have the same problem with the HVR900 (analog part) although it's supposed to work.

2008-10-22, 20:06	#4 (permalink)
ray076NL Portal Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Thanks for your answer. It just should work, it stands in the wiki that those cards are supported by the tv-server. I guess it is the tv-server that's buggy (no offense to the programmers), in some way it doesn't do what it is supposed to do and somewhere something is going wrong. I can offer one of my cards for testing purposes to one of the programmers here, if they want to.

2008-10-31, 18:57	#5 (permalink)
ray076NL Portal Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I still have the problem, does anyone have the solution?

2008-11-28, 14:36	#6 (permalink)
samoddie Portal Member Join Date: Oct 2008 Posts: 8 Thanks: 1 Thanked 0 Times in 0 Posts	I had the same problem and played around with my codecs, I currently have mpa and mpv decoders and I now I get a great picture. However, I am stuck on channel switching now though - "cannot start timeshift card in use". I start up tv as normal, begin watching a channel but then when i change I get that error and it stays on the same channel... So, yeah have a play with your codecs and see if that does anything. I selected a codec, tested and if it didn't work i selected another until i found the ones that worked - mpa and mpv... Hope this helps