Client hangs

nissse · 2006-11-14, 07:37

I have tested the server on different computers with happage 150 mce and it works fine as long as you run the client/server on same computer but when trying to view tv on a client connected from other computer it will becume very unstabil.

Tv stream works most of the time
switching channels often hangs the client
tyring to whatch recorded tv hangs the client every time

i have tryed this on different clients and servers and it is the same result.
i am using 100 mb wired lan on a hub.
i have followd the wiki.

Anyone have the same problems or is it something wrong with my setup ?

msj33 · 2006-11-14, 10:17

I have exactly same experience on two client machines connting to my server with Hauppauge MCE 150/500.

Slower startup of mediaportal client

Slow channel switching, with a hang of 3-5 seconds.

Both machines frezzes often in tv mode, and i can't shutdown mediaportal. Have to use the power button.

All Clients/servers are Up to date 13/11-2006

/Morten

sim1964 · 2006-11-14, 10:30

I also have this with Nova-t DVB-t card. Plus also DVB EPG data is not grabbed.

fussmuff · 2006-11-14, 10:48

Hi,

i have exactly the same problem here since 10-12 svn-vers. i have tried.

It becomes more stable when you turn tv-off before changing the channel.

I suggest there´s an issue building the graph at Zapping.........

There are similar threads in the Bug-Forum...

regards
Mike

frippe75 · 2006-11-15, 09:13

I also have simular problem... But i cant even get the client plug to work on another system but the localhost.

After adding the ip address upon first visiting the my tv screen.. it comes back but not as the doucmentation meantions with a screen "My TV"...

Im wondering if the client will only contact the tv server for info or make any calls to the sql server because my epg data wont populate.

The client host seems to open up two tcp connection on port 31456....

frippe75 · 2006-11-15, 10:22

Hmm...

I performed the streaming test with VLC. Works perfect..

Installed on client:
Media portal 0.2.1.0 + SVN (2006-11-15) + TV server plugin.
Was asked to enter IP.

Still wont work.

Also set the SQL Browser services to automatic and started it up.

Noticed that VLC used port 554 which indicates that Mediaportal as a client has not tried to open a stream against port 554 ...yet

So.. Is port 31456 tvserver or sql stuff??

tompa · 2006-11-15, 12:19

Quote:

Originally Posted by frippe75

Installed on client:
Media portal 0.2.1.0 + SVN (2006-11-15) + TV server plugin.

Hi!
You should not have used Media portal 0.2.1.0 + SVN, it should be Media portal 0.2.0.0 + SVN!
If thats your only problem then it should work!

frippe75 · 2006-11-15, 14:44

I'll give that a try, thanks!

frippe75 · 2006-11-15, 15:33

Quote:

Originally Posted by frippe75

I'll give that a try, thanks!

Soo.. Now i tried installing 0.2.0.0 and applying SVN 15-11 + plugin after doing a complete uninstall.....

Still same problem....

I do get a connect message when entering the ip address....... This takes 30 secs.
using 100mbit wired.

epg emtpy
stream info empty
turn on tv - nothing

PLEASE !!! HELP :-O

frippe75 · 2006-11-15, 15:53

This is what goes on network wise.

The client does:
get_Cards.WTvControl.IController
server response with nothing

then the client does
get_DatabaseConnectionString.WTvControl.IControlle r, TvControl
server responds with connection info...
looking at the data source = test-bla bla bla

not so good with windows networking but this is netbios names... not set this up... maybe i should switch to using only ipaddresses... any suggestion on how to set this up?????

2006-11-14, 07:37	#1 (permalink)
nissse Portal Member Join Date: Sep 2006 Age: 29 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Client hangs I have tested the server on different computers with happage 150 mce and it works fine as long as you run the client/server on same computer but when trying to view tv on a client connected from other computer it will becume very unstabil. Tv stream works most of the time switching channels often hangs the client tyring to whatch recorded tv hangs the client every time i have tryed this on different clients and servers and it is the same result. i am using 100 mb wired lan on a hub. i have followd the wiki. Anyone have the same problems or is it something wrong with my setup ?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Client hangs/crashes	Jorgen_CAB	Get Support	0	2007-01-14 21:44
Client Hangs / Boxer	kalon	Get Support	2	2006-12-12 16:59
Cards 'bound' to client watching should have more intelligence	dutch_	pre 1.0 RC1	2	2006-11-17 13:15
client plugin hangs MP	chenks	Get Support	15	2006-11-03 19:41
MP client hangs	kalon	pre 1.0 RC1	0	2006-10-29 21:46

2006-11-14, 10:17	#2 (permalink)
msj33 Portal Member Join Date: Nov 2005 Location: Aarhus Posts: 72 Thanks: 1 Thanked 0 Times in 0 Posts Country:	I have exactly same experience on two client machines connting to my server with Hauppauge MCE 150/500. Slower startup of mediaportal client Slow channel switching, with a hang of 3-5 seconds. Both machines frezzes often in tv mode, and i can't shutdown mediaportal. Have to use the power button. All Clients/servers are Up to date 13/11-2006 /Morten

2006-11-14, 10:30	#3 (permalink)
sim1964 Portal Member Join Date: Jun 2006 Location: UK Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts My System	I also have this with Nova-t DVB-t card. Plus also DVB EPG data is not grabbed.

2006-11-14, 10:48	#4 (permalink)
fussmuff Portal Member Join Date: Sep 2006 Posts: 8 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi, i have exactly the same problem here since 10-12 svn-vers. i have tried. It becomes more stable when you turn tv-off before changing the channel. I suggest there´s an issue building the graph at Zapping......... There are similar threads in the Bug-Forum... regards Mike

2006-11-15, 09:13	#5 (permalink)
frippe75 Portal Member Join Date: Jun 2006 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	I also have simular problem... But i cant even get the client plug to work on another system but the localhost. After adding the ip address upon first visiting the my tv screen.. it comes back but not as the doucmentation meantions with a screen "My TV"... Im wondering if the client will only contact the tv server for info or make any calls to the sql server because my epg data wont populate. The client host seems to open up two tcp connection on port 31456....

2006-11-15, 10:22	#6 (permalink)
frippe75 Portal Member Join Date: Jun 2006 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	Hmm... I performed the streaming test with VLC. Works perfect.. Installed on client: Media portal 0.2.1.0 + SVN (2006-11-15) + TV server plugin. Was asked to enter IP. Still wont work. Also set the SQL Browser services to automatic and started it up. Noticed that VLC used port 554 which indicates that Mediaportal as a client has not tried to open a stream against port 554 ...yet So.. Is port 31456 tvserver or sql stuff??

2006-11-15, 14:44	#8 (permalink)
frippe75 Portal Member Join Date: Jun 2006 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	I'll give that a try, thanks!

2006-11-15, 15:53	#10 (permalink)
frippe75 Portal Member Join Date: Jun 2006 Posts: 41 Thanks: 0 Thanked 0 Times in 0 Posts	This is what goes on network wise. The client does: get_Cards.WTvControl.IController server response with nothing then the client does get_DatabaseConnectionString.WTvControl.IControlle r, TvControl server responds with connection info... looking at the data source = test-bla bla bla not so good with windows networking but this is netbios names... not set this up... maybe i should switch to using only ipaddresses... any suggestion on how to set this up?????