Dunno where I am going wrong ?!?

[snr_duck]

TV-Server Version: 0.3
MediaPortal Version: 2.0.3.0
MediaPortal Skin: Project Mayhem 3
Windows Version: Xp SP2
CPU Type: Sempron 2400+
HDD: 1x160GB 3 x 250 GB SATA, 1x 500GB SATA
Memory: 1GB
Motherboard: GA7VT600-1394
Motherboard Chipset: Via
Motherboard Bios: F7
Video Card: Sapphire 9600XT
Video Card Driver: ATI Catalyst 7.3
Sound Card: Realtek AC97
Sound Card AC3: Realtek AC97
Sound Card Driver: Realtek 5.7
1. TV Card: Compro
1. TV Card Type: DVB-T300
1. TV Card Driver: Compro 1.3.3.0
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec: default
MPEG2 Audio Codec: default
Satelite/CableTV Provider: Free to Air
HTPC Case: Antec P180
Cooling: 3x 120mm fans
Power Supply: Thermaltake 420w
Remote: Compro Remote
TV: Sony 51cm
TV - HTPC Connection: standard Composite connection


Hi All,

Here's the deal.

I can get the TV server installed and I can get the client installed and it seems to see the server as it says the TV server and Database are both connected.

Weird thing is I can't "turn on the TV" and I can't change channel.

Seems to be able to record tho.. or at least claims to be recording.

I can look at the TV guide that I am getting from D1 as well but when I select the shows it just seems to lose the plot and I get no picture, no sound and no joy.

Any ideas on what I could be f*cking up ?


Duck

[kuehnch]

In my mind, you have more than one networkinterface on the serverside and tvserver uses the wrong one, to stream out video/audio. Have a look on

http://wiki.team-mediaportal.com/TV-...ming-Multiseat

And check for firewall-troubles, too....

[snr_duck]

Hi Kuehne,

I neglected to mention that the TV Server and the Client are all on the same machine.

I do have multiple network interfaces on the box but all but 1 are disabled.

Any other ideas ?

Also... does anyone know how to remove the Compro software for a DVB-T300 if the Add/Remove Programs option hangs using 100% of the CPU ?

[snr_duck]

Still not working....

ANyone else got an idea for me to try ?

[Muldini]

Could you specify the following a little more?

Originally Posted by snr_duck

MPEG2 Video Codec: default
MPEG2 Audio Codec: default

MPV/MPA?

Also, what builds are you using? Please add logs!

Kind regards,
Muldini

[mdsflyer]

Have you checked what IP address the server is using under the tvserver configuration page, often defaults to something other than your computers network IP

Cheers
m

[iascoot]

i have this same issue, using latest svns
will try get logs

[iascoot]

ok after testing, problem appears to be with mediaportal frontend, if I open the Tv Server and Preview a channel, It plays fine and will start Timeshifting in there If i Do Manual Control, However
If i go back to mediaportal, It fails to show anything

Log attached
this is running single seat
with
MediaPortal-svn--07-20-2007--00-59-Rev15263
tvengine3-07-20-2007--08-46h--Rev15264

Have tried new TxReader

[iascoot]

worked out how to fix this:

install latest Mediaportal SVN

and look at post http://forum.team-mediaportal.com/me...-t25460p2.html
about installing .NET 3.0

Worked for me