Help: "No audio/video". (TT budget BDA+ CAM)

[jcee]

MediaPortal Version:
Windows Version:
CPU Type:
HDD: 160GB
Memory: 1GB
Motherboard: Asrock K8NV
Motherboard Chipset: (Nvidia chipset)
Motherboard Bios: ?
Video Card: Geforce 7600GS
Video Card Driver: ?
Sound Card: X-Fi Music
Sound Card AC3:
Sound Card Driver: ?
1. TV Card: TT Budget 1500 (DVBC), same as Hauppauge Nova-C
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
Satelite/CableTV Provider: Kabel Deutschland (DVBC)
HTPC Case:
Cooling:
Power Supply:
Remote:
TV:
TV - HTPC Connection: DVI=>HDMI


All previous versions (stable releases) were working quite good with this TV-card + CAM.

Now with TV server it does not work at all.
When entering "Manual", it does not display anything in the upper part of that window (as shown by the wiki screenshot), on the lower half it displays correctly the card and I can hit Record or start Timeshift and select the channel. And I have buttons for starting/stopping the service.

When I actually hit start timeshift or record. It takes about 10 seconds and the message "No Video/Audio" appears!!!

(In mediaportal it does also not work)

I was able to tune and find the channels.

I am using the TT BDA drivers and I have a CAM (Alphacrypt) as all the channels here in german cable TV are scrambled!

Did I do something wrong? I was able to proceed through all installation steps withouth a problem.

I now went back to the stable build and that works again..

What should I do next? Wait for next release? Is there a log I could post here?

Any help appreciated and.
have a nice day.

[frodo]

you might want to try the latest build
from http://tvengine3.team-mediaportal.com/

[jcee]

I will.
I tried yesterday the lastest snapshot. That did not help. Maybe this build will.
I will reply tomorrow.

Keep up the good work
!!!!

[jcee]

Sorry. :-(
Did not help.

I did a clean install, deleted MP folder. Installed 0.2.0, latest SVN, tv server + plugin.

I can see the plugin working as I see channels beeing changed in the TVserver "manual control" page.

But it always tells me "No video/audio detected".
I tested all CAM settings and pressed "Start Timeshift" again and again. But every time I recieved the error message mentioned above.

What should I do now? No chance to use TVserver3.0?

I will revert to stable 0.2.0.1 this afternoon. :-(

[AberDino]

I have the same problem, just tried latest TV Engine as well.

I had a spare Hauppauge Nova-t (TT) and put that card in my server running MS Windows 2003 SP1 with latest patches. System accepted latest TT BDA drivers (v4.4.10.17) no problem. Then installed SQL Express Edition and latest TV Engine build. Channels are scanned properly, but when I go to Manual Control and press 'Start TimeS' after a few seconds I get a popup 'No Audio/Video detected'. I've tried a few channels, makes no difference.

I've attached my TV Engine log files, from starting the TV Engine service to closing TV Server application. Hope they are of use for troubleshooting.

[jcee]

Any news?

I will stick with 0.2.1.0. What a pity.

Don't know if someone is addressing this problem as I dont seem to be the only one..

[yeti]

Same problem with the new Pinnacle Dual DVb-T USB stick, no solution at present time.

[deebo]

i seem to be having the same kind of problems, i DONT have a cam, but my log is filled with crap about cam and descrambling

vlc works fine, but running client on the same machine as the server results in "no video/audio detected"

[tompa]

Iv got the same problem.
Suddenly my configuration tells me "No Video/Audio detected". Everything was working ok earlier.
I recovered my PC with Norton Ghost, then everything was Ok for a moment, then the same problem again.
TV server & Client version:11488

Any ideas?

edit: This hapends when running Manual Control.

[tompa]

log files for the post above.