MediaPortal Forums HTPC/MediaCenter

Go Back   MediaPortal Forum » General » HTPC Projects » Hardware Selection Help


Hardware Selection Help Need suggestions on hardware for your HTPC? Ask here!

Reply
 
LinkBack Thread Tools Display Modes
Old 2005-02-09, 21:21   #1 (permalink)
lubbe75
Guest
 
Posts: n/a


Default Barebone with 2 PCI sockets?

I'm planning an HTPC here and it seems to me like the twinhan DVB-T card with CI card reader is a good choice (since I may very well want to watch subscription channels later on). However, that one requires two PCI sockets...

Is there a good barebone system out there that has 2 PCI sockets?

Most barebones have only one. I have found two exceptions so far: ASUS Pundit and ASUS Vintage. I read here and there that the pundit becomes rather noisy, and the vintage doesn't look all that fantastic But hey, if someone can tell me that the vintage is nice and good for MP I might change my opinion. Any other choices out here?

I don't know a whole lot about hardware so I'd rather base it on a barebone than an empty box.

Good to hear your thoughts on this...

/Lubbe
  Reply With Quote
Old 2005-02-10, 01:34   #2 (permalink)
Portal Member
 
Join Date: Feb 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts


Default

I use an original pundit not the pundit-r for my box and it works ok. although I have only just installed MP on it and am a bit concerned about performance mainly because of the poor quality graphics card in it. I was going to take a look at the R version see what graphics it was running. Mine has a 2ghz celeron in it and runs real quiet you can hear the clock on my mantle piece way louder than it.

although I have just found this thread with a few complaints about noise. I like my pundit and have had it for about 1 1/2 years.

http://nolanparty.com/mediaportal.so...ghlight=pundit
simon169 is offline   Reply With Quote
Old 2005-02-10, 01:54   #3 (permalink)
Portal Member
 
Join Date: Feb 2005
Posts: 23
Thanks: 0
Thanked 0 Times in 0 Posts


Default

Just had a scout about and the pundit-r uses an ati 9100 graphics card and everyone seems happy with it. Although it might be worth asking a question about performance with it and the vrm9 renderring with it ??

simon169 is offline   Reply With Quote
Old 2005-02-10, 08:27   #4 (permalink)
lubbe75
Guest
 
Posts: n/a


Default

Ah, so the Pundit may not be as noisy as many claim. Still, one of the drawbacks is that it has no AGP slot in case one finds the built-in graphics to be less than enough. Hmm... Do you know of any good site where I can search for barebones on speciffic things such as "2 x PCI"?
  Reply With Quote
Old 2005-02-10, 17:08   #5 (permalink)
spo
Portal Member
 
Join Date: Sep 2004
Location: Denmark, 56.0500N 10.0000E
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts


Default

Take a look on the Antex Aria case. It can hold a Micro-ATX motherboard with up to 4 slots (AGP/PCI).

It's a little bigger than normal barebone systems, but looks pretty nice.
spo is offline   Reply With Quote
Old 2005-02-11, 08:34   #6 (permalink)
lubbe75
Guest
 
Posts: n/a


Default

Hmm... I can't really find much information about the Antex Aria (google). Even so I think it is not being sold in Sweden. Now when I think about it there is always the same set of barebones being sold everywhere, and most of them are really the cube in one way or another.
  Reply With Quote
Old 2005-02-11, 09:19   #7 (permalink)
pipin77
Guest
 
Posts: n/a


Default

Here's a review of the antec: http://www.htpcnews.com/main.php?id=aria_1

I'm just thinking of combining it with a msi board http://www.msi.com.tw/program/produc...il.php?UID=639 and an athlon 64 3000+.
  Reply With Quote
Old 2005-03-14, 00:21   #8 (permalink)
Portal Member
 
Join Date: Feb 2005
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts


Default

I just went out to microcenter today, and saw a barebones that I hadn't seen before. It's a condor, and here's a link to microcenter's website
http://www.microcenter.com/single_pr...uct_id=0174925

A sudhian review is here
http://www.sudhian.com/showdocs.cfm?aid=544

It is pretty nice. Small and attractive has 1 agp, and 2 pci slots. It does look like a little pc rather than looking like a home theatre piece, but it is a really really cute pc, so that makes up for a lot in my book.

I've also come across something that might look nice in the living room, and comes as a barebones. It's an nMediaPC. I think I came across a review somewhere that said the front door hinges don't feel as strong as they could, but overall it seems like people liked it.
http://www.newegg.com/app/ViewProduc...204-002&depa=1

And I've also come across this on newegg. It wasn't there a few weeks ago, and I don't know much about it, but it looks pretty small (and I don't know if it comes in a barebones, this is just a case)
http://www.newegg.com/app/ViewProduc...162-026&depa=1
If you marry it with this mobo (recommended in another thread here), you'll get 1 PCI-Express, and 3 PCI slots!
http://www.newegg.com/app/ViewProduc...130-485&depa=1

Anyone else out there with something they like?
PLeblanc is offline   Reply With Quote
Reply

Bookmarks

Tags
barebone, pci, sockets

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
MCE compatible display plugin... JoeDalton Support 103 2008-06-09 22:08
A barebone delight fathead HTPC Projects 12 2006-07-25 20:29


All times are GMT +1. The time now is 11:04.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.2.0 Protected by Akismet Blog with WordPress