best remote 4 antec fusion case

simon169 · 2007-12-17, 06:55

I am going to get the black Antec Fusion case with the LCD display. What I would like to know is which is the best/easiest remote to get to work with the inbuilt IR. I definately want to use the inbuilt IR and not have to add another.

1. A Genuine M$ MCE remote
2. A logitec harmony 555 or similar
3. Would this http://www.scan.co.uk/Products/Produ...oductID=627096 MCE clone work ???
4. the imon remote

The harmony remote is a bit pricey for me and I would prefer a cheaper option, but I am willing to get one if it is the best solution.

Thanks

Spragleknas · 2007-12-17, 08:34

I've played around with the Fusion case, and I think the IR-reciever is poor since it maps remote signals as keystrokes.

Even so:
1 and 2 work OK with the case (Harmony mapped as MCE) - 3 probably the same?
4 Should work OK - since you will use iMon software.

bigflause · 2007-12-19, 19:08

I got the hauppage MCE external remote as the ir receiver in the fusion is rubish. be prepared to be dissapointed as it doesn't regonise most keystroke. I had to download the latest drivers for it and disable the ir proccessing. hauppage one works great with mp. i'm delighted with it and it was only €20

sugarfree · 2008-01-16, 15:51

I have ANtec Fusion Black + Microsoft remote + latest iMon software for LCD display + Vista 32-bit but seems Mediaportal do not recognize my remote as it should. I use internal IR-receiver of Antec LCD, not dedicated M$ receiver.
i`ve checked box "use microsoft remote or keyboard" in MP remote config but do not receive any functionality which is shown in key mappings. Can anyone hint me what to do? (direction buttons and OK button work in MP)

bigflause · 2008-01-16, 20:00

I tried to use just the imon Ir with my remote but you won't get a lot of functionality in mp. like the back key doesn't work and the numbers, etc. the only thing you can do is map them. I just disable the Ir receiver on the case and use the usb one I got from hauppage. that works perfect with mp

sugarfree · 2008-01-16, 20:32

How did you manage to disable only IR receiver but not LCD at all?
And maybe anyone have other solutions?

bigflause · 2008-01-16, 20:35

If you download the drivers from here it lets you disable the ir http://www.antec.com/uk/support_faqDownload.html

sugarfree · 2008-01-17, 05:11

thanks, but the only way to get LCD functional in Mediaportal is to replace native driver with one from imon. Maybe someone knows other solution?

bigflause · 2008-01-17, 09:11

if you install the antec ones, disable the ir, the update to the ones it advised you to download when you install it. which are the imon ones it keeps the config from the antec drivers and the ir is still disabled.

2007-12-17, 06:55	#1 (permalink)
simon169 Portal Member Join Date: Feb 2005 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts	best remote 4 antec fusion case I am going to get the black Antec Fusion case with the LCD display. What I would like to know is which is the best/easiest remote to get to work with the inbuilt IR. I definately want to use the inbuilt IR and not have to add another. 1. A Genuine M$ MCE remote 2. A logitec harmony 555 or similar 3. Would this http://www.scan.co.uk/Products/Produ...oductID=627096 MCE clone work ??? 4. the imon remote The harmony remote is a bit pricey for me and I would prefer a cheaper option, but I am willing to get one if it is the best solution. Thanks

2007-12-17, 08:34	#2 (permalink)
Spragleknas Super Moderator Join Date: Dec 2005 Location: Rogaland Age: 32 Posts: 3,412 Thanks: 145 Thanked 63 Times in 53 Posts Country: My System	I've played around with the Fusion case, and I think the IR-reciever is poor since it maps remote signals as keystrokes. Even so: 1 and 2 work OK with the case (Harmony mapped as MCE) - 3 probably the same? 4 Should work OK - since you will use iMon software. __________________ Please read -> HOW TO START A SUPPORT THREAD !!! Support MediaPortal! Donate by clicking HERE Dedicated HTPC board (Norway) -> MSPC.no

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Antec Fusion VFD	KoktGrus	Installation, configuration support	14	2008-01-14 23:50
Ideas how to get VFD working with Antec Fusion case?	petsa	Hardware Selection Help	10	2007-10-08 00:40
Which CPU heatsink for Antec Fusion / NSK2400 case?	dan_aka_jack	Hardware Selection Help	8	2007-09-02 22:24
Antec Fusion works?	eloxxd	Installation, configuration support	11	2007-08-23 01:18
Antec Fusion	KoktGrus	Ongoing HTPC Projects	1	2007-02-22 10:00

2007-12-19, 19:08	#3 (permalink)
bigflause Portal Member Join Date: Aug 2007 Age: 24 Posts: 190 Thanks: 2 Thanked 2 Times in 2 Posts Country: My System	I got the hauppage MCE external remote as the ir receiver in the fusion is rubish. be prepared to be dissapointed as it doesn't regonise most keystroke. I had to download the latest drivers for it and disable the ir proccessing. hauppage one works great with mp. i'm delighted with it and it was only €20

2008-01-16, 15:51	#4 (permalink)
sugarfree Portal Member Join Date: Jan 2008 Posts: 17 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	I have ANtec Fusion Black + Microsoft remote + latest iMon software for LCD display + Vista 32-bit but seems Mediaportal do not recognize my remote as it should. I use internal IR-receiver of Antec LCD, not dedicated M$ receiver. i`ve checked box "use microsoft remote or keyboard" in MP remote config but do not receive any functionality which is shown in key mappings. Can anyone hint me what to do? (direction buttons and OK button work in MP)

2008-01-16, 20:00	#5 (permalink)
bigflause Portal Member Join Date: Aug 2007 Age: 24 Posts: 190 Thanks: 2 Thanked 2 Times in 2 Posts Country: My System	I tried to use just the imon Ir with my remote but you won't get a lot of functionality in mp. like the back key doesn't work and the numbers, etc. the only thing you can do is map them. I just disable the Ir receiver on the case and use the usb one I got from hauppage. that works perfect with mp

2008-01-16, 20:32	#6 (permalink)
sugarfree Portal Member Join Date: Jan 2008 Posts: 17 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	How did you manage to disable only IR receiver but not LCD at all? And maybe anyone have other solutions?

2008-01-16, 20:35	#7 (permalink)
bigflause Portal Member Join Date: Aug 2007 Age: 24 Posts: 190 Thanks: 2 Thanked 2 Times in 2 Posts Country: My System	If you download the drivers from here it lets you disable the ir http://www.antec.com/uk/support_faqDownload.html

2008-01-17, 05:11	#8 (permalink)
sugarfree Portal Member Join Date: Jan 2008 Posts: 17 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	thanks, but the only way to get LCD functional in Mediaportal is to replace native driver with one from imon. Maybe someone knows other solution?

2008-01-17, 09:11	#9 (permalink)
bigflause Portal Member Join Date: Aug 2007 Age: 24 Posts: 190 Thanks: 2 Thanked 2 Times in 2 Posts Country: My System	if you install the antec ones, disable the ir, the update to the ones it advised you to download when you install it. which are the imon ones it keeps the config from the antec drivers and the ir is still disabled.