Newbie Setup help

RyanS107 · 2005-07-27, 00:52

I am setting up my first box here. I need some help.

What exactly all do i need?

I am buying a new PC, but what do i need to add to it to be able to have a good setup?

Will the standard video card work ok? Or do i need some fancy one?

I want to be able to run a dual tuner (for recording while watching). Is there a single card that can do both?

Any help would be appreciated. Thanks!

TVKiwi · 2005-07-27, 04:22

Hi Rysan.

The best way for us to help you would be if you could post what you have so far (what type of cpu, gpu, ram etc) and how you wish to connect it to your TV, stereo etc. Also what your video sources will be - eg DVB or analog, set top box etc.

vbap · 2005-07-27, 04:35

Actually, for US digital TV, it's ATSC not DVB... :wink:

Also, check out the minimum requirements for MP is a good starting point:
http://mediaportal.sourceforge.net/requirements.html

RyanS107 · 2005-07-27, 21:14

Yes, I am in the US.

I have an HP Celeron 2.8 on order. It has 40GB, 256MB

I will add another HD, probably for storage of video and more RAM.

After doing a little research, I see I would probably want to add 2 TV cards. Would it be recomended to get a PVR-150MCE and a PVR-150? With this could i then get the capibilities of the radio in the 150MCE and the IR blaster to control my Dish network satellite dish? Along with the remote that comes with the 150?

Please let me know what your recomendations are on the TV cards and also if i need to do anything about my video card. I do not know what type of video card is going to be factory installed.

I am not sure about output yet. Do i need anything special / any recomendations on what to use for this??

Thanks!!

2005-07-27, 00:52	#1 (permalink)
RyanS107 Portal User Join Date: Jun 2005 Location: Toledo, OH Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Newbie Setup help I am setting up my first box here. I need some help. What exactly all do i need? I am buying a new PC, but what do i need to add to it to be able to have a good setup? Will the standard video card work ok? Or do i need some fancy one? I want to be able to run a dual tuner (for recording while watching). Is there a single card that can do both? Any help would be appreciated. Thanks!

2005-07-27, 04:22	#2 (permalink)
TVKiwi Portal Member Join Date: May 2005 Posts: 48 Thanks: 0 Thanked 0 Times in 0 Posts	Hi Rysan. The best way for us to help you would be if you could post what you have so far (what type of cpu, gpu, ram etc) and how you wish to connect it to your TV, stereo etc. Also what your video sources will be - eg DVB or analog, set top box etc. __________________ P4 2.8Mhz, 512mb ram, 80 gig + 160 gig + 250 gig hd, Geforce 6600 128mb, Hauppage PVR500mce.

2005-07-27, 04:35	#3 (permalink)
vbap Portal Member Join Date: Feb 2005 Location: Melbourne, Australia Posts: 131 Thanks: 0 Thanked 1 Time in 1 Post	Actually, for US digital TV, it's ATSC not DVB... :wink: Also, check out the minimum requirements for MP is a good starting point: http://mediaportal.sourceforge.net/requirements.html __________________ My Media PC Set-up

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TV preview not always available in Setup	pbb	Installation, configuration support	1	2007-01-13 20:33
newbie Q: what is advantage of server/client setup if only have one dedicated PC ??	arjay	General Talk	4	2006-11-02 08:56
TV-card is detected in setup but not in MP itself	TL@	Installation, configuration support	4	2006-07-12 17:19
newbie needs setup help - no tv pictures pace sky digibox	arjay	Installation, configuration support	3	2006-05-01 19:18
newbie .. digital cable setup HW selection help	harlock	Hardware Selection Help	0	2005-08-05 16:37

2005-07-27, 21:14	#4 (permalink)
RyanS107 Portal User Join Date: Jun 2005 Location: Toledo, OH Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Yes, I am in the US. I have an HP Celeron 2.8 on order. It has 40GB, 256MB I will add another HD, probably for storage of video and more RAM. After doing a little research, I see I would probably want to add 2 TV cards. Would it be recomended to get a PVR-150MCE and a PVR-150? With this could i then get the capibilities of the radio in the 150MCE and the IR blaster to control my Dish network satellite dish? Along with the remote that comes with the 150? Please let me know what your recomendations are on the TV cards and also if i need to do anything about my video card. I do not know what type of video card is going to be factory installed. I am not sure about output yet. Do i need anything special / any recomendations on what to use for this?? Thanks!!