TV-signal drop-outs with Terratec 2400i?

[defcon5]

Originally Posted by ronilse

Hi,
With my Terratec 2400i i had issue with bad soldering which i had to fix(glad i know how to do that) + that i had to bend the case fittings cause else pins back on the card didn't connect properly causing second tuner to fail....

btw: defcon5, attach logs so i can compare to mine.


Regards
Roy

thanks Ronilse

This afternoon from my home I´ll attach......all log files??? or specified log file?

Regards

[ronilse]

Hi,
all logs = all logs in tv log folder

Regards
Roy

[defcon5]

Hi

Here are my logs files
Information is from may 11th until right now. I´ve not cleaned nothing.
The name of channels than I get missage "Unable to create graph" and not recorded totally after a stand by are:

-TVE3
-Canal 33
- 3/24
-Antena 3

All in DVB-T card

Thanks for your time an I hope some clue for a near solution

Regards

[ronilse]

Hi,
defcon5, your log seems like mine.
What you see could be due to "mda" filter or something in the stream which TSWriter don't handle well or if you have "epg grabbing while timeshifting" enabled(try turn it off as a test if it is enabled).

Regards
Roy

[defcon5]

Originally Posted by ronilse

Hi,
defcon5, your log seems like mine.
What you see could be due to "mda" filter or something in the stream which TSWriter don't handle well or if you have "epg grabbing while timeshifting" enabled(try turn it off as a test if it is enabled).

Regards
Roy

Hi

I´ll test with disable EPG grabbing and post results here
What is mda filter?
Do you think is a card hardware problem ?
Have you fixed this issue?

Thanks Ronilse

[ronilse]

Hi,
Don't think it's due to card hw error, i'v not had any problems after the fix of the card itself & decompose issue.
"mda" it's your descrambler filter(which we dont' discuss here).

Regards
Roy

[defcon5]

Originally Posted by ronilse

Hi,
Don't think it's due to card hw error, i'v not had any problems after the fix of the card itself & decompose issue.
"mda" it's your descrambler filter(which we dont' discuss here).

Regards
Roy

Oh, Now I know your talk, Sorry

But this problem wit "Unable to create graph" only occurs if I have TVE3 RC1 version or before.
With MP 0.2.3 didn´t get this message
(with or without mda filter)


Thanks

[defcon5]

Hi

I've spent 2 day testing with Terratec cinergy 2400i an with TVE3 RC2 alway get the following messages with some channels:

"Unable to start graph" from tvsetup preview and "Unable create timeshifting/No audio/video ..." from MP

Yesterday I tested card with MP 0.2.3 + SVN 8th april (last one I remember) and the card works fine

Also, test card installing de Terratec software included in CD (I never tested before) and works fine also

No mda filters in all steps

Thanks