Leadtek DVR3200H HDTV Tuner Card - NO SOUND!

youngm · 2008-10-08, 09:40

Hi all,

I've just bought a Leadtek HDTV TV Tuner Card and I get no sound when it's in TV Mode.

I get sound OK when the PVR2 application is in Timeshift Mode, or after I record a program, however, in live TV Mode, I get no sound!

I'm using the on-board S/PDIF port on the Motherboard. Everything else works flawlessly, just no sound in TV Mode

I'm running Windows XP. I tried connecting the 4 pin CD-ROM cable from the TV Tuner card to the CD-In on the motherboard, to no avail.

Very frustrating!

Any ideas?

wazmau · 2008-10-19, 01:41

Hi,
Go to setup in mediaportal and change the audio codec to the leadtek one and see if that works. I have the same TV card and it is working fine for me using the leadtek codec.

Warren

Major_Mess · 2008-11-10, 12:46

I am looking at this card for a friend who has Foxtel so will be using the analog MPEG2 encoder. Have you guys noticed any issues using the analog side of the card? Thanks

wazmau · 2008-11-10, 21:40

Quote:

Originally Posted by Major_Mess

I am looking at this card for a friend who has Foxtel so will be using the analog MPEG2 encoder. Have you guys noticed any issues using the analog side of the card? Thanks

I originally got this card so I could bring selectv into mediaportal. I had no problems except I couldn't get the mediablaster to work and the kids would change the channel on me and instead of a car race from eurosport, my recording would be cartoon network! (For that reason I bought a twinhan sat card.)

I have now connected my old VCR to the analog side of the card and it is also working fine so with 2 different uses I have had no problems. Very good card in my opinion.

Major_Mess · 2008-11-11, 02:25

Thanks for the reply.

2008-10-08, 09:40	#1 (permalink)
youngm Portal User Join Date: Oct 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Leadtek DVR3200H HDTV Tuner Card - NO SOUND! Hi all, I've just bought a Leadtek HDTV TV Tuner Card and I get no sound when it's in TV Mode. I get sound OK when the PVR2 application is in Timeshift Mode, or after I record a program, however, in live TV Mode, I get no sound! I'm using the on-board S/PDIF port on the Motherboard. Everything else works flawlessly, just no sound in TV Mode I'm running Windows XP. I tried connecting the 4 pin CD-ROM cable from the TV Tuner card to the CD-In on the motherboard, to no avail. Very frustrating! Any ideas?

2008-11-10, 12:46	#3 (permalink)
Major_Mess Portal Member Join Date: Jun 2006 Age: 41 Posts: 48 Thanks: 6 Thanked 1 Time in 1 Post	I am looking at this card for a friend who has Foxtel so will be using the analog MPEG2 encoder. Have you guys noticed any issues using the analog side of the card? Thanks Last edited by Major_Mess; 2008-11-10 at 13:00.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Geniatech HDTV thriller-X8000A HDTV PCI Card	guss722	Newcomers Forum	1	2008-02-20 19:24
Geniatech HDTV thriller-X8000A HDTV PCI Card	YarsMang	Newcomers Forum	1	2008-01-18 21:33
Which HDTV tuner card?	GregJSchneid	Hardware Selection Help	1	2007-11-16 00:53
HDTV card with HDTV decoder video card question	Reies	General Support	0	2006-03-11 05:01
ATI HDTV Wonder analog tuner with no sound	tomas	General Support	0	2005-12-30 22:17

2008-10-19, 01:41	#2 (permalink)
wazmau Portal Member Join Date: May 2008 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi, Go to setup in mediaportal and change the audio codec to the leadtek one and see if that works. I have the same TV card and it is working fine for me using the leadtek codec. Warren

2008-11-11, 02:25	#5 (permalink)
Major_Mess Portal Member Join Date: Jun 2006 Age: 41 Posts: 48 Thanks: 6 Thanked 1 Time in 1 Post	Thanks for the reply.