dual audio channel a.k.a. SAP doesn't work - Page 2

maysider · 2006-08-01, 21:05

[quote="Fingerswinger"]

Quote:

now most people use more advanced capture cards like the PVR series from hauppauge. but i am sure that all of these cards are able to record both languages because they're able to record normal stereo broadcastings (it's exactly the same system). the tricky part seems to be preventing the driver / capture card / whatever to interfere and switch to one language.

i don't know what the situation is with DVB cards or HDTV tough...

greets,
fingerswinger

yes, this is really desirable...I think, there is no big problem to add this function - just launch in both loudspeakers only Left audio stream or Right audio stream...even in MyVideo plugin of course, because of recordings.

would be great

Kathrin · 2007-04-24, 15:10

Has that problem been solved yet? I could not find the possibility to change the language.
The rest of the software is fab!

TesterBoy · 2007-06-03, 12:32

I'd like to add a vote for maysider's suggestion - allow me to select either the left or right channel to be played as Mono through both speakers.

The only thing is, it's video (.rmvb/.mpg) I want to do it with, not TV (I have some Chinese recordings with Cantonese on one channel and Mandarin on the other), so if it happens, please don't restrict it to TV!

Cheers
Andrew

Ramap · 2007-07-16, 17:43

Any news? Its a most expected feature for me.

babelfish · 2007-10-08, 21:30

Any news on this?
I've noticed Eurosport Nordic use this SAP/Dual Chanel thing on Thor/CD, and they use it permanently.
When selecting language it typicaly comes up as swe/den on one line and fin/nor on the next. Selecting one, you get exactly that: two languages.

felo · 2007-11-10, 23:30

And the problem is not only whit SAP, also i only get Mono audio.
Ill be great to have STEREO!
Cheers!

brunoh · 2007-11-17, 15:52

As a lot of other features are working very good here, old (and less important) topics like this one are surfacing again

I also have the problem, that the language selection here does not work. The recording with the TVE3 has improved, and all the audio-channels get recorded, but the "pseudo-stereo" with 2 different languages is not detected correctly.

I will upload a recording done via DVB-S. In mediaportal the default-language plays fine. Also there are correctly 2 languages detected, but when I change to the second language english and french are played at the same time.

The recording is available at: http://www.yulara.ch/HD/PsychMaggie%...11-17-16_00.ts

DarellS · 2008-02-20, 18:08

Any news on this? any chance this could be addressed in a forseeable future?

Tx.

viralburn · 2008-03-23, 17:32

out of interest, this feature works rather nicely in videoLan, which means I have to watch any of these type of recordings in videoLan and not mediaportal. Someone (brunoh) mentioned this as being a 'less important' problem, however, for me, this is a big issue as almost all my recordings have this.

MightyPolo · 2008-05-14, 22:00

Quote:

Originally Posted by viralburn

out of interest, this feature works rather nicely in videoLan, which means I have to watch any of these type of recordings in videoLan and not mediaportal. Someone (brunoh) mentioned this as being a 'less important' problem, however, for me, this is a big issue as almost all my recordings have this.

As i understand this is more problem of audio render or mixing, dont know if it can be controlled within mediaportal.
I find out, that in ffdshow audio mixer can be defined custom mixing matrix, maybe this can solve this request.

This is just my guess, maybe have someone more relevant informations.

P.

2007-11-17, 15:52	#17 (permalink)
brunoh Portal Member Join Date: Aug 2004 Posts: 49 Thanks: 6 Thanked 0 Times in 0 Posts My System	As a lot of other features are working very good here, old (and less important) topics like this one are surfacing again I also have the problem, that the language selection here does not work. The recording with the TVE3 has improved, and all the audio-channels get recorded, but the "pseudo-stereo" with 2 different languages is not detected correctly. I will upload a recording done via DVB-S. In mediaportal the default-language plays fine. Also there are correctly 2 languages detected, but when I change to the second language english and french are played at the same time. The recording is available at: http://www.yulara.ch/HD/PsychMaggie%...11-17-16_00.ts Last edited by brunoh; 2007-11-17 at 16:09.

2008-03-23, 17:32	#19 (permalink)
viralburn Portal Member Join Date: Jun 2005 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	multichannel (european) sound out of interest, this feature works rather nicely in videoLan, which means I have to watch any of these type of recordings in videoLan and not mediaportal. Someone (brunoh) mentioned this as being a 'less important' problem, however, for me, this is a big issue as almost all my recordings have this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scandinavian Disney Channels - Audio problem	pmcguire	0.2.0.0 Final and SVN Builds	0	2006-12-16 07:38
Tuning-problem - FireDTV - Stockholm-Nacka	alek01	Installation, configuration support	2	2006-07-10 23:06
Dual avi audio and subtitles together do not work in 0.2RC4	Pawwlik	The old Bugreport Forum	6	2006-06-11 17:58
Configuration crashes everytime when scanning for channels	lmh	General Support	5	2006-04-23 18:40

2007-04-24, 15:10	#12 (permalink)
Kathrin Portal Member Join Date: Apr 2007 Posts: 5 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Has that problem been solved yet? I could not find the possibility to change the language. The rest of the software is fab!

2007-06-03, 12:32	#13 (permalink)
TesterBoy Portal Member Join Date: Jul 2006 Location: Lower Hutt Posts: 153 Thanks: 1 Thanked 2 Times in 2 Posts Country: My System	I'd like to add a vote for maysider's suggestion - allow me to select either the left or right channel to be played as Mono through both speakers. The only thing is, it's video (.rmvb/.mpg) I want to do it with, not TV (I have some Chinese recordings with Cantonese on one channel and Mandarin on the other), so if it happens, please don't restrict it to TV! Cheers Andrew

2007-07-16, 17:43	#14 (permalink)
Ramap Portal User Join Date: Jul 2007 Age: 34 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Any news? Its a most expected feature for me.

2007-10-08, 21:30	#15 (permalink)
babelfish Portal Member Join Date: Aug 2007 Age: 14 Posts: 6 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Any news on this? I've noticed Eurosport Nordic use this SAP/Dual Chanel thing on Thor/CD, and they use it permanently. When selecting language it typicaly comes up as swe/den on one line and fin/nor on the next. Selecting one, you get exactly that: two languages.

2007-11-10, 23:30	#16 (permalink)
felo Portal Member Join Date: Oct 2007 Location: Whit my MOM! Age: 6 Posts: 55 Thanks: 8 Thanked 0 Times in 0 Posts My System	And the problem is not only whit SAP, also i only get Mono audio. Ill be great to have STEREO! Cheers!

2008-02-20, 18:08	#18 (permalink)
DarellS Portal Member Join Date: Oct 2007 Posts: 14 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Any news on this? any chance this could be addressed in a forseeable future? Tx.