Updated tunerparameters for The Netherlands MULTIKABEL

Lotsofjazz · 2008-01-27, 22:04

Hi all,

I managed to get all channels in Mediaportal TV Server by manually adjust the tunerparameter file for my cable provider. The one supplied with the latest setup of TV Server is out dated, I used it to make a modified file that can be selected as a "country" in TV Server, and then use the scan predefined provider button to find all channels. The updated transponderlist I found on the Dutch FireDTV.nl forum.

Just copy the text below into a Notepad session, and save as "The Netherlands Multikabel NEW.dvbc" in the Tuningparameters directory (subdirectory of the Mediaportal TV Server program directory) I advise the TV Server develloppers to include this new list into one of the next TV server builds.

I hope this helps!

Copy all below:
;This file contains the definitions for DVB-C networks. It contains the parameters needed
;to tune to one ore more DVB-C networks. For each network you have to specify
; -carrier frequency
; -modulation type
; -symbolrate
;format: frequency,modulation,symbolrate
;
;for modulation the following types can be choosen:
; 1024QAM , 112QAM, 128QAM, 160QAM, 16QAM , 16VSB, 192QAM, 224QAM, 256QAM, 320QAM, 384QAM
; 448QAM , 512QAM, 640QAM, 64QAM , 768QAM, 80QAM, 896QAM, 8VSB , 96QAM , AMPLITUDE,
; FREQUENCY, BPSK , OQPSK , QPSK
234000,64QAM,6875000
274000,64QAM,6875000
282000,64QAM,6875000
290000,64QAM,6875000
434000,64QAM,6875000
450000,64QAM,6875000
458000,64QAM,6875000
466000,64QAM,6875000
474000,64QAM,6875000
514000,64QAM,6875000
546000,64QAM,6875000
578000,64QAM,6875000
586000,64QAM,6875000
626000,64QAM,6875000
634000,64QAM.6875000
642000,64QAM,6875000
650000,64QAM.6875000
658000,64QAM,6875000
666000,64QAM,6875000
682000,64QAM,6875000
706000,64QAM,6875000
714000,64QAM,6875000
722000,64QAM,6875000
762000,64QAM,6875000
794000,64QAM,6875000
826000,64QAM,6875000

hansdegit · 2008-02-06, 12:51

Question for you, LOJ...Off topic, sorry.

Are you able to watch Eurosport? I suspect a tsreader problem...

Lotsofjazz · 2008-02-06, 12:57

Im am still im the 2 month trial period where all channels should be able to watch.. I will try this evening and let you know here.

BTW, I had to rescan the channels again yesterday after my system was gone heywire, and now I am missing a few channels, under them a few, to me important, HD channels.. NGC-HD. Film1 HD, HD-NL and also Sport1 HD.. Has Multikabel/Casema changed the transponder list again!?

Thanks,

Lots

Lotsofjazz · 2008-02-07, 11:36

I tried yesterday to see if Eurosport works.. and it does with me.

Try ffdshow for Mpeg2 decoding and cyberlink h264 for HD TV decoding.

2008-01-27, 22:04	#1 (permalink)
Lotsofjazz Portal Member Join Date: Jan 2008 Posts: 114 Thanks: 2 Thanked 2 Times in 2 Posts My System	Updated tunerparameters for The Netherlands MULTIKABEL Hi all, I managed to get all channels in Mediaportal TV Server by manually adjust the tunerparameter file for my cable provider. The one supplied with the latest setup of TV Server is out dated, I used it to make a modified file that can be selected as a "country" in TV Server, and then use the scan predefined provider button to find all channels. The updated transponderlist I found on the Dutch FireDTV.nl forum. Just copy the text below into a Notepad session, and save as "The Netherlands Multikabel NEW.dvbc" in the Tuningparameters directory (subdirectory of the Mediaportal TV Server program directory) I advise the TV Server develloppers to include this new list into one of the next TV server builds. I hope this helps! Copy all below: ;This file contains the definitions for DVB-C networks. It contains the parameters needed ;to tune to one ore more DVB-C networks. For each network you have to specify ; -carrier frequency ; -modulation type ; -symbolrate ;format: frequency,modulation,symbolrate ; ;for modulation the following types can be choosen: ; 1024QAM , 112QAM, 128QAM, 160QAM, 16QAM , 16VSB, 192QAM, 224QAM, 256QAM, 320QAM, 384QAM ; 448QAM , 512QAM, 640QAM, 64QAM , 768QAM, 80QAM, 896QAM, 8VSB , 96QAM , AMPLITUDE, ; FREQUENCY, BPSK , OQPSK , QPSK 234000,64QAM,6875000 274000,64QAM,6875000 282000,64QAM,6875000 290000,64QAM,6875000 434000,64QAM,6875000 450000,64QAM,6875000 458000,64QAM,6875000 466000,64QAM,6875000 474000,64QAM,6875000 514000,64QAM,6875000 546000,64QAM,6875000 578000,64QAM,6875000 586000,64QAM,6875000 626000,64QAM,6875000 634000,64QAM.6875000 642000,64QAM,6875000 650000,64QAM.6875000 658000,64QAM,6875000 666000,64QAM,6875000 682000,64QAM,6875000 706000,64QAM,6875000 714000,64QAM,6875000 722000,64QAM,6875000 762000,64QAM,6875000 794000,64QAM,6875000 826000,64QAM,6875000

2008-02-06, 12:51	#2 (permalink)
hansdegit Portal Member Join Date: May 2005 Location: Schagen, The Netherlands Age: 36 Posts: 194 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Question for you, LOJ...Off topic, sorry. Are you able to watch Eurosport? I suspect a tsreader problem... __________________ If it ain't broken, DO try to fix it

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The Netherlands-casema-2008.dvbc	knee	General Talk	4	2008-02-06 20:59
Req: Multikabel tvdatabase file	hansdegit	MyTV - Engine 0.2	0	2007-09-05 21:45
DVB-C in the netherlands... finally!	frodo	General Support	22	2006-09-12 00:02
Mediacenter / HTPC (Netherlands)	Roadie	For Sale	1	2005-12-15 08:15
netherlands vs. germany	mama	OffTopic	3	2005-08-17 21:39

2008-02-06, 12:57	#3 (permalink)
Lotsofjazz Portal Member Join Date: Jan 2008 Posts: 114 Thanks: 2 Thanked 2 Times in 2 Posts My System	Im am still im the 2 month trial period where all channels should be able to watch.. I will try this evening and let you know here. BTW, I had to rescan the channels again yesterday after my system was gone heywire, and now I am missing a few channels, under them a few, to me important, HD channels.. NGC-HD. Film1 HD, HD-NL and also Sport1 HD.. Has Multikabel/Casema changed the transponder list again!? Thanks, Lots

2008-02-07, 11:36	#4 (permalink)
Lotsofjazz Portal Member Join Date: Jan 2008 Posts: 114 Thanks: 2 Thanked 2 Times in 2 Posts My System	I tried yesterday to see if Eurosport works.. and it does with me. Try ffdshow for Mpeg2 decoding and cyberlink h264 for HD TV decoding.