Calling all MP New Zealanders (Both of you!!) - Page 112

Kiwi · 2008-03-24, 21:06

Ive got DVB-T working great in Wgtn off Kaukau. Switching between channels fine, probably a couple of seconds. Im using TVE3 SVN 17778 from memory, Hauppauge HVR2200.
Cheers

DrMopar · 2008-03-24, 21:15

Quote:

Originally Posted by handya

has anyone got dvb-t working, i have all the channels working but i cant switch between them, when i switch between 2 dvb-t channels it crashes, so i have it set up that tv3 is my only dvb-t channel and all the rest are dvbs. although this is limiting with multi channel tuning in tv server.

Hi, I've had a similar issue with dvb-t but my signal strength is very low. So low, that I get blocking/pixelation on the screen during bad weather. I'm in a poor UHF reception area. I'm going to upgrade (and hopefully raise) my aerial and see if this improves things. Sticking with dvb-s in the meantime.

handya · 2008-03-25, 02:35

i had to reinstall the front end client of tv server and now the epg wont come up in the guide it will only show up in the channel list, any ideas on what this could be?

tvnz 7 now on dvb-s

DrLurch · 2008-03-25, 04:26

Hey Got my Hauppauge pvr 4000 yesterday installed it along with the latest tvserver build
but when i scan for the dvb-t i dont pick anything up
but with powercinema i pick up all the dvb-t channels

DrMopar · 2008-03-25, 04:38

Quote:

wasn't sure if it would work with XP Pro

Quote:

I use it with XP Pro SP2

Hi, I picked up a MCE remote today but can't get it to wake my machine from S4. It works ok from S3. Did you have to do any special tweaks to get yours working?

mcraenz · 2008-03-25, 05:05

Check your BIOS for wake by USB and also check out the MCE standby tool. I hope I haven't set you wrong, I didn't realise S4 was hibernate I thought it was standby I use standby with the remote on my networked client and I run the server 24/7. I think S4 should work fine though, I just prefer standby as it's much faster to wake and only uses a few watts to keep the RAM alive

cranz · 2008-03-25, 09:04

Quote:

Originally Posted by DrLurch

Hey Got my Hauppauge pvr 4000 yesterday installed it along with the latest tvserver build
but when i scan for the dvb-t i dont pick anything up
but with powercinema i pick up all the dvb-t channels

Where abouts in the country are you? and do you know where your UHF aerial is pointing

I.e. in Auckland is it pointing west to Waitarua or to the Sky Tower or towards Remuera

Chances are TVServer doesnt have the right frequencies for the tower you are receiving from

DrLurch · 2008-03-25, 09:33

Waikato the Aerial points to Mt Te Aroha

cranz · 2008-03-25, 09:38

Cool, what you need to do is edit the file dvbt.xml (in notepad or wordpad). This file is in C:\Program Files\Team MediaPortal\MediaPortal TV Server\TuningParameters\

You need to add the frequencies for the Te Aroha tower, to do this copy and paste the below into the file at the bottom after the last </channel> line and before the </dvbt> line

Quote:

Save the file and reload TV Server configuration and go back to scan. There should now be an option (probably at the bottom of the list) for New Zealand - Te Aroha Waikato/Tauranga

PHansen · 2008-03-25, 09:55

cranz, I just got a DVB-T card also, but am having the same problem as DrLurch.

I can scan, but only pick up two radio stations with the card but it's all good in PowerCinema... I've checked all the frequency settings and the latest snapshot has them all correct.

Are there any tips on what i should do to get it going in MP rather than using PowerCinema to see what freeview is going to be like on MP?

2008-03-25, 02:35	#1113 (permalink)
handya MP Donator Join Date: Sep 2007 Posts: 122 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	i had to reinstall the front end client of tv server and now the epg wont come up in the guide it will only show up in the channel list, any ideas on what this could be? tvnz 7 now on dvb-s Last edited by handya; 2008-03-25 at 02:42.

2008-03-25, 05:05	#1116 (permalink)
mcraenz Portal Member Join Date: Jul 2007 Location: Auckland Posts: 481 Thanks: 2 Thanked 17 Times in 15 Posts Country: My System	Check your BIOS for wake by USB and also check out the MCE standby tool. I hope I haven't set you wrong, I didn't realise S4 was hibernate I thought it was standby I use standby with the remote on my networked client and I run the server 24/7. I think S4 should work fine though, I just prefer standby as it's much faster to wake and only uses a few watts to keep the RAM alive __________________ Intel DP35DP / c2d E8400 (3.0Ghz) / NVIDIA 8600GT / 4GB DDR800 / HVR-2200 / SkyStar 2 / Techotrend S1500+CI / PVR-150 New Zealander's don't forget to check out the NZ Wiki Page

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calling an external string? Help needed for newbie	m.standish	General Development (no feature request here!)	1	2006-11-27 16:45
Calling UK DVB-T Freeview users	psyco	Get Support	15	2006-11-07 17:21
Calling LC11 users for advice	robomonkey	Hardware Selection Help	29	2005-08-16 13:27
Calling ATI Sapphire 9550SE owners	Czar63	Hardware Selection Help	1	2005-02-23 00:44
Calling g_Player.Play from timer elapsed event not working	devo	General Development (no feature request here!)	7	2004-09-12 00:31

2008-03-24, 21:06	#1111 (permalink)
Kiwi Portal Member Join Date: Sep 2006 Location: Pukerua Bay Posts: 25 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	Ive got DVB-T working great in Wgtn off Kaukau. Switching between channels fine, probably a couple of seconds. Im using TVE3 SVN 17778 from memory, Hauppauge HVR2200. Cheers

2008-03-25, 04:26	#1114 (permalink)
DrLurch Portal Member Join Date: Nov 2007 Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Hey Got my Hauppauge pvr 4000 yesterday installed it along with the latest tvserver build but when i scan for the dvb-t i dont pick anything up but with powercinema i pick up all the dvb-t channels

2008-03-25, 09:33	#1118 (permalink)
DrLurch Portal Member Join Date: Nov 2007 Posts: 34 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	Waikato the Aerial points to Mt Te Aroha

2008-03-25, 09:55	#1120 (permalink)
PHansen MP Donator Join Date: Sep 2007 Posts: 60 Thanks: 0 Thanked 0 Times in 0 Posts Country:	cranz, I just got a DVB-T card also, but am having the same problem as DrLurch. I can scan, but only pick up two radio stations with the card but it's all good in PowerCinema... I've checked all the frequency settings and the latest snapshot has them all correct. Are there any tips on what i should do to get it going in MP rather than using PowerCinema to see what freeview is going to be like on MP?