Calling all MP New Zealanders (Both of you!!) - Page 167

Growler · 2008-08-10, 07:37

Still getting choppy TV3 & C4

Vista, aver pcie speedy, PDVD8, EVR enabled, acceleration on.

All other chanels fine, tv3 & c4 ar just super choppy, about every 1.5-2sec is a .5-1sec lag

Aerial alignment is almost perfect, all sig stregth/qual is 100% for all chans.

CPU usage is 10ish% on all chans too.

If I preview TV3 & C4 in server config neither are laggy.

here is a chop from my log after i change to TV3 chan

Quote:

2008-08-10 16:30:45.739715 [Debug][MPMain]: ChangeChannelNr()
2008-08-10 16:30:45.744597 [Debug][MPMain]: ChannelNavigator.ZapToChannel TV3 - zapdelay False
2008-08-10 16:30:45.745574 [Debug][MPMain]: UpdateOSD()
2008-08-10 16:30:45.755339 [Debug][MPMain]: Window: TvPlugin.TvZapOsd init
2008-08-10 16:30:45.757292 [Debug][MPMain]: zaposd pageload
2008-08-10 16:30:45.773892 [Debug][MPMain]: ZAP OSD:ON
2008-08-10 16:30:45.785610 [Info.][MPMain]: Channel change:TV3
2008-08-10 16:30:45.787563 [Info.][MPMain]: TVHome.ViewChannelAndCheck(): View channel=TV3
2008-08-10 16:30:45.850059 [Info.][MPMain]: TSReaderPlayer

ause graph
2008-08-10 16:30:46.524821 [Info.][MPMain]: tvhome

eektoEnd(True)
2008-08-10 16:30:46.528727 [Debug][MPMain]: g_Player.SeekAbsolute() - Preparing to seek to 0:0:9
2008-08-10 16:30:46.529703 [Info.][MPMain]: TsReaderPlayer:seekabs:98410000 start:0 end:98410000
2008-08-10 16:30:46.547280 [Info.][MPMain]: TsReaderPlayer seek done:0
2008-08-10 16:30:46.548257 [Info.][MPMain]: TSReaderPlayer: current pos:9.841 dur:9.841
2008-08-10 16:30:46.553139 [Info.][MPMain]: TSReaderPlayer:Continue graph
2008-08-10 16:30:46.554116 [Info.][MPMain]: succeeded

ucceeded TvControl.VirtualCard
2008-08-10 16:30:46.606847 [Info.][MPMain]: TSReaderPlayer:OnRequestAudioChange()
2008-08-10 16:30:46.608800 [Debug][MPMain]: TVHome.OnAudioTracksReady()
2008-08-10 16:30:46.617588 [Debug][MPMain]: TVHome.GetPreferedAudioStreamIndex(): preferred LANG(s): preferAC3:False preferAudioTypeOverLang:True
2008-08-10 16:30:46.618565 [Debug][MPMain]: Audio streams avail: 2
2008-08-10 16:30:46.619541 [Info.][MPMain]: Audio stream: switching to preferred MPEG audio stream 0, NOT based on LANG (none avail. matching )
2008-08-10 16:30:46.889055 [Info.][17]: TsReaderPlayer: OnVideoFormatChanged - streamtype=H264 resolution=1920x544 aspect ratio=16:9 bitrate=15000000 isInterlaced=True
2008-08-10 16:30:46.943739 [Info.][MPMain]: TvNotify:LoadNotifies
2008-08-10 16:30:46.944716 [Info.][MPMain]: TvNotify: 0 notifies
2008-08-10 16:30:47.072637 [Info.][3]: PlaneScene: PresentSurface() dispose surfaces
2008-08-10 16:30:47.110721 [Info.][12]: PlaneScene: PresentSurface() dispose surfaces
2008-08-10 16:30:48.209283 [Debug][16]: PlaneScene: crop T, B : 0, 0
2008-08-10 16:30:48.210260 [Debug][16]: PlaneScene: crop L, R : 0, 0
2008-08-10 16:30:48.210260 [Info.][16]: PlaneScene: video WxH : 1920x1080
2008-08-10 16:30:48.211236 [Debug][16]: PlaneScene: video AR : 16:9
2008-08-10 16:30:48.212213 [Info.][16]: PlaneScene: screen WxH : 720x556
2008-08-10 16:30:48.214166 [Debug][16]: PlaneScene: AR type : Normal
2008-08-10 16:30:48.214166 [Debug][16]: PlaneScene: PixelRatio : 1
2008-08-10 16:30:48.215142 [Debug][16]: PlaneScene: src : (0,0)-(1920,1080)
2008-08-10 16:30:48.216119 [Debug][16]: PlaneScene: dst : (0,75)-(720,480)
2008-08-10 16:30:48.220025 [Debug][16]: Planescene.InternalPresentSurface: timePassed = 2.369141 - dropped 1 frame(s)
2008-08-10 16:30:48.592071 [Debug][MPMain]: VMR9Helper: Playing -> Repainting, Frames 2
2008-08-10 16:30:49.198478 [Info.][16]: planescene: PresentSurface() frame:0 enabled:True allowed:False 1920x1080
2008-08-10 16:30:49.203360 [Info.][16]: planescene: PresentSurface() frame:1 enabled:True allowed:False 1920x1080
2008-08-10 16:30:49.220937 [Info.][16]: planescene: PresentSurface() frame:2 enabled:True allowed:False 1920x1080
2008-08-10 16:30:49.237538 [Debug][MPMain]: VMR9: Repainting -> Playing, Frames: 3
2008-08-10 16:30:49.238514 [Info.][16]: planescene: PresentSurface() frame:0 enabled:True allowed:False 1920x1080
2008-08-10 16:30:51.059687 [Debug][16]: Planescene.InternalPresentSurface: timePassed = 1.691406 - dropped 1 frame(s)
2008-08-10 16:30:51.586020 [Debug][MPMain]: zaposd pagedestroy
2008-08-10 16:30:51.588950 [Debug][MPMain]: Window: TvPlugin.TvZapOsd deinit
2008-08-10 16:30:51.590903 [Debug][MPMain]: TextureManager: CleanupThumbs()
2008-08-10 16:30:51.591879 [Debug][MPMain]: ZAP OSD:Off timeout
2008-08-10 16:30:51.955137 [Debug][16]: Planescene.InternalPresentSurface: timePassed = 0.5244141 - dropped 1 frame(s)
2008-08-10 16:30:52.203168 [Debug][16]: Planescene.InternalPresentSurface: timePassed = 0.2207031 - dropped 1 frame(s)
2008-08-10 16:30:52.977533 [Debug][16]: Planescene.InternalPresentSurface: timePassed = 0.7578125 - dropped 1 frame(s)
2008-08-10 16:30:53.448206 [Debug][MPMain]: VMR9Helper: Playing -> Repainting, Frames 2

fraseyboy · 2008-08-10, 07:45

Quote:

Originally Posted by Jeditrav

Howdy folks,

just wondering what software people are using to cut advertising out of their dvb-t recordings? Attack of the Clones looked outstanding last night and would like to remove those pesky ads - I'm not interested in converting or compressing the file as I don't want to lose any of the detail or quality; I just want a quality, high def version until the saga is finally (hopefully) released on BluRay ;-)

Cheers,

Trav.

Was Attack of the Clones in HD? It didn't look it to me.

Growler · 2008-08-10, 07:46

just thought i should add im playing to a samsung 32" with 1080i set on extended desktop for monitor number 2.

Geforce 8600gt running 175.16

kiwijunglist · 2008-08-10, 08:11

I only watched it for 1 minute, looked HD to me. Also had 5.1 sound working when it was playing.

mcraenz · 2008-08-10, 11:17

@Growler: Pay no attention to sig/quality, every driver reports it differently so it can't be relied on.
Can you delete your tswriter log then do a preview of some channels then attach the newly created tswriter log.

Growler · 2008-08-10, 12:35

Quote:

Originally Posted by mcraenz

@Growler: Pay no attention to sig/quality, every driver reports it differently so it can't be relied on.
Can you delete your tswriter log then do a preview of some channels then attach the newly created tswriter log.

All done.

deleted old, started MP, watched chan 1 for 10 secs then went to Chan 3 for 10, then to C4 for 10, then back to TV1, quit. New tswrriter log attached.

I hope i have done it right, only been using a TV card and MP for a few days

philster · 2008-08-10, 21:14

Growler: Just in case my recent experience can help....

I had my UHF antenna installed last Friday and had the problem that I could get the Freeview HD/ tvCentral channels fine, but none of the other channels gave me a picture that could be watched. When I looked in my TsWriter.log file I had the exact same output, that is, A LOT of "Continuity error..." messages.

It turned out that my problem was the piece of Coax from the wall socket to the TV Card was faulty. After replacing the cable, the problem went away. I was very pleased it turned out to be something that simple.

Growler · 2008-08-10, 21:59

it was a brand new run of cable >.< direct aerial to Tuner card in back of PC.

the weird thing is, if i open server configuration, preview tv3 or C4, and make it full screen on my LCD, its fine. Not the optimum way to do it by any means, but thats what makes me think its not my reception or input to the actual DVB-T card

thekiwi · 2008-08-11, 01:29

Hi all

Been searching through the settings of MP and searched through the Forum, but cant find anything, but it must be something very simple

At the moment when I record something(lets say One News). THe recordings are fine, its in its own folder ... however when you go into Recorded TV, select the folder, they are all listed, but its impossible to tell whch related to which day. So is it possible to have it display the date on which it was recorded?

Having the same drama with the Olympics. If I record segments within a 3 hr block of coverage, I get 3 blocks with the same name, but no idea which is which (eg if one was recorded one hr after another)

On a related note, does anyone know of an easy way to edit the entries (title) within MediaPortal (eg without going in SQL?)

philster · 2008-08-11, 03:40

thekiwi:

From memory, In the Recorded TV screen, change the sort option to date. It will then show you the Date of the recording and the duration.

Growler:

Quote:

Originally Posted by Growler

it was a brand new run of cable >.< direct aerial to Tuner card in back of PC.

the weird thing is, if i open server configuration, preview tv3 or C4, and make it full screen on my LCD, its fine. Not the optimum way to do it by any means, but thats what makes me think its not my reception or input to the actual DVB-T card

Have you used Graphedit to see if there are any differences between preview mode and MP in the codecs being used?

2008-08-10, 11:17	#1665 (permalink)
mcraenz Portal Member Join Date: Jul 2007 Location: Auckland Posts: 476 Thanks: 2 Thanked 17 Times in 15 Posts Country: My System	@Growler: Pay no attention to sig/quality, every driver reports it differently so it can't be relied on. Can you delete your tswriter log then do a preview of some channels then attach the newly created tswriter log. __________________ Intel DP35DP / c2d E8400 (3.0Ghz) / NVIDIA 8600GT / 4GB DDR800 / HVR-2200 / SkyStar 2 / Techotrend S1500+CI / PVR-150 New Zealander's don't forget to check out the NZ Wiki Page

2008-08-10, 21:14	#1667 (permalink)
philster Portal Member Join Date: Mar 2006 Location: Wellington Posts: 22 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Growler: Just in case my recent experience can help.... I had my UHF antenna installed last Friday and had the problem that I could get the Freeview HD/ tvCentral channels fine, but none of the other channels gave me a picture that could be watched. When I looked in my TsWriter.log file I had the exact same output, that is, A LOT of "Continuity error..." messages. It turned out that my problem was the piece of Coax from the wall socket to the TV Card was faulty. After replacing the cable, the problem went away. I was very pleased it turned out to be something that simple. Last edited by philster; 2008-08-10 at 21:15. Reason: Spelling

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calling an external string? Help needed for newbie	m.standish	General Development (no feature request here!)	1	2006-11-27 16:45
Calling UK DVB-T Freeview users	psyco	Get Support	15	2006-11-07 17:21
Calling LC11 users for advice	robomonkey	Hardware Selection Help	29	2005-08-16 13:27
Calling ATI Sapphire 9550SE owners	Czar63	Hardware Selection Help	1	2005-02-23 00:44
Calling g_Player.Play from timer elapsed event not working	devo	General Development (no feature request here!)	7	2004-09-12 00:31

2008-08-10, 07:46	#1663 (permalink)
Growler Portal Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	just thought i should add im playing to a samsung 32" with 1080i set on extended desktop for monitor number 2. Geforce 8600gt running 175.16

2008-08-10, 08:11	#1664 (permalink)
kiwijunglist Portal Member Join Date: Jun 2008 Posts: 86 Thanks: 0 Thanked 3 Times in 2 Posts Country:	I only watched it for 1 minute, looked HD to me. Also had 5.1 sound working when it was playing.

2008-08-10, 21:59	#1668 (permalink)
Growler Portal Member Join Date: Aug 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts Country: My System	it was a brand new run of cable >.< direct aerial to Tuner card in back of PC. the weird thing is, if i open server configuration, preview tv3 or C4, and make it full screen on my LCD, its fine. Not the optimum way to do it by any means, but thats what makes me think its not my reception or input to the actual DVB-T card

2008-08-11, 01:29	#1669 (permalink)
thekiwi Portal Member Join Date: Jan 2007 Location: Gisborne Posts: 69 Thanks: 2 Thanked 0 Times in 0 Posts Country: My System	Hi all Been searching through the settings of MP and searched through the Forum, but cant find anything, but it must be something very simple At the moment when I record something(lets say One News). THe recordings are fine, its in its own folder ... however when you go into Recorded TV, select the folder, they are all listed, but its impossible to tell whch related to which day. So is it possible to have it display the date on which it was recorded? Having the same drama with the Olympics. If I record segments within a 3 hr block of coverage, I get 3 blocks with the same name, but no idea which is which (eg if one was recorded one hr after another) On a related note, does anyone know of an easy way to edit the entries (title) within MediaPortal (eg without going in SQL?)