Is a Hauppauge WinTV HVR-1300 a good card to buy?

pwrdesign · 2007-02-11, 17:32

The Hauppage HVR-1300 is listed as a "supported card", can someone verify that it works?

I've got a Pinnacle 310i today and cant get it to work, even though its listed as supported card.

I dont want to spend more time with this now, so I'm trying with a new card instead...

/ Patrik

Juppe · 2007-02-13, 09:01

Hi pwrdesign.

I can verify that the analogue part of the HVR-1300 works great, I dont have any digital-tv, so that i cant verify.

mPod · 2007-02-13, 09:45

HVR-1300 retail running perfectly here. Always did, no matter if analog or digital.

ronilse · 2007-02-13, 10:24

Hi,
like mPod, my HVR-1300 run perfect on both analog & digital. Works fine with both classic MP & TVE3.

Regards
Roy

TreibAir · 2007-02-14, 17:00

Hi,

I've bought mine yesterday. At the beginning I had quite good video quality but no sound at all. After updating the drivers (the drivers on the CD were almost three years old, thanks Hauppauge!) everything works fine.

At least analogue TV, DVB-T is still not availible here.

mirk · 2007-02-14, 20:28

Digital part running with no problems here. Analog not tested.
HVR-1300 have very good picture too if i compere it to my floppyDTV card.

mameo · 2007-06-27, 17:00

Hi,
I am going to buying this card, but I've one question..
Can I record simultaneously a dvb-t and analog channel using TVserverV3 with this card?
Are you satisfied about this card?
Thanks.

gloomyandy · 2007-06-27, 23:07

No you can't use the analogue and digital parts at the same time. But it is a good card... Does anyone have it setup as a hybrid in TVE3? I tried a long time ago but had problems...

Andy

Spragleknas · 2007-06-27, 23:14

Mirk: Just to be clear: Better than FloppyDTV?
Ronilse: How are you using the digital part here in Norway? Are you refering to old test transmissions in MPEG2 or the new MPEG4 (H.264)?

vip855 · 2007-07-13, 09:10

hi guys, is the WinTV-HVR-1600 supported? I just installed Media portal on my windows xp pro machine but it says no capture card detected. please help

2007-02-11, 17:32	#1 (permalink)
pwrdesign Portal User Join Date: Feb 2007 Age: 26 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Is a Hauppauge WinTV HVR-1300 a good card to buy? The Hauppage HVR-1300 is listed as a "supported card", can someone verify that it works? I've got a Pinnacle 310i today and cant get it to work, even though its listed as supported card. I dont want to spend more time with this now, so I'm trying with a new card instead... / Patrik

2007-02-13, 09:45	#3 (permalink)
mPod Retired Team Member Join Date: Jan 2005 Location: Berlin Age: 34 Posts: 2,086 Thanks: 0 Thanked 3 Times in 3 Posts Country: My System	HVR-1300 retail running perfectly here. Always did, no matter if analog or digital. __________________ Bad news from the stars... We cannot give any support without a properly filled support template and a full mediaportal.log pasted here. Before you ask...

2007-02-14, 20:28	#6 (permalink)
mirk Portal Designer Join Date: Jun 2006 Location: Växjö, Sweden Age: 25 Posts: 847 Thanks: 44 Thanked 58 Times in 20 Posts Country: My System	Digital part running with no problems here. Analog not tested. HVR-1300 have very good picture too if i compere it to my floppyDTV card. __________________ Download SpinSafe skins \| TVSeries Logos \| Swedish TV logos Found a bug in one of the SpinSafe skins? Why not add it to the SpinSafe bugtracker...

2007-06-27, 23:14	#9 (permalink)
Spragleknas Super Moderator Join Date: Dec 2005 Location: Rogaland Age: 32 Posts: 3,813 Thanks: 179 Thanked 90 Times in 76 Posts Country: My System	Mirk: Just to be clear: Better than FloppyDTV? Ronilse: How are you using the digital part here in Norway? Are you refering to old test transmissions in MPEG2 or the new MPEG4 (H.264)? __________________ Please read -> HOW TO START A SUPPORT THREAD !!! Support MediaPortal! Donate by clicking HERE Dedicated HTPC board (Norway) -> MSPC.no

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2007-02-13, 09:01	#2 (permalink)
Juppe Portal Member Join Date: Nov 2006 Posts: 145 Thanks: 4 Thanked 4 Times in 4 Posts Country: My System	Hi pwrdesign. I can verify that the analogue part of the HVR-1300 works great, I dont have any digital-tv, so that i cant verify.

2007-02-13, 10:24	#4 (permalink)
ronilse Portal Tester Join Date: Jul 2005 Posts: 3,218 Thanks: 19 Thanked 90 Times in 76 Posts Country: My System	Hi, like mPod, my HVR-1300 run perfect on both analog & digital. Works fine with both classic MP & TVE3. Regards Roy

2007-02-14, 17:00	#5 (permalink)
TreibAir Portal User Join Date: Feb 2007 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi, I've bought mine yesterday. At the beginning I had quite good video quality but no sound at all. After updating the drivers (the drivers on the CD were almost three years old, thanks Hauppauge!) everything works fine. At least analogue TV, DVB-T is still not availible here.

2007-06-27, 17:00	#7 (permalink)
mameo Portal Member Join Date: Aug 2006 Location: Perugia Age: 31 Posts: 46 Thanks: 3 Thanked 0 Times in 0 Posts Country: My System	Hi, I am going to buying this card, but I've one question.. Can I record simultaneously a dvb-t and analog channel using TVserverV3 with this card? Are you satisfied about this card? Thanks.

2007-06-27, 23:07	#8 (permalink)
gloomyandy MP Donator Join Date: Sep 2006 Age: 47 Posts: 261 Thanks: 1 Thanked 3 Times in 3 Posts Country: My System	No you can't use the analogue and digital parts at the same time. But it is a good card... Does anyone have it setup as a hybrid in TVE3? I tried a long time ago but had problems... Andy

2007-07-13, 09:10	#10 (permalink)
vip855 Portal User Join Date: Jul 2007 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts	hi guys, is the WinTV-HVR-1600 supported? I just installed Media portal on my windows xp pro machine but it says no capture card detected. please help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hauppauge HVR 1300	Innovativeuser	Hardware	12	2007-04-26 20:17
Terratec Cinergy 1400 vs. Hauppauge WinTV-HVR-1300	Ramsgaard	Hardware Selection Help	3	2006-07-10 00:37
Is this a good card to buy? (XFX Geforce 6500)	pkkid	Hardware Selection Help	2	2006-06-13 11:09
Hauppauge WinTV-HVR-1100/1300	Johan	General Support	1	2006-05-21 01:36
Hauppauge HVR-1300	xadox	Media Portal - Support	2	2005-08-18 20:54