No ATSC video displayed

Nippywiffle · 2007-05-17, 05:35

TV-Server Version: 05-16-2007--01-21h--Rev14637
MediaPortal Version: svn--05-16-2007--00-59-Rev14637
MediaPortal Skin: standard
Windows Version: XP SP2
CPU Type: Athlon XP 3200+
HDD: 500GB
Memory: 768MB
Motherboard: Abit AN7
Motherboard Chipset: Nvidia nForce
Video Card: AGP Nvidia Geforce 6800 GTS
Video Card Driver: 93.71
Sound Card: Onboard Nvidia nForce
Sound Card AC3:
Sound Card Driver: 6.14.457.0
1. TV Card: Hauppauge HVR-1600
1. TV Card Type: ATSC / Analogue
1. TV Card Driver: 3.4B (1.62.24326.0)
MPEG2 Video Codec: Nvidia Purevideo latest version
MPEG2 Audio Codec: Nvidia Purevideo latest version
Satelite/CableTV Provider: Antenna
Remote: Hauppauge 45 button

Using TV Server:
Analogue channels work fine, but ATSC channels do not display. You can hear audio, but see no video.

Have tried other decoders (cyberlink, dscaler etc) Have tried different cominations of video and audio decoders also.

Have tried disabling the analogue part of the card, and just using ATSC.

You can timeshift this audio, but still get no video on playback.

I get video and audio using other software.

garry · 2007-05-17, 16:24

Are using analog for OTA channels or s-video/composite input? I can't get s-video to work on my HVR-1600.

garry · 2007-05-17, 18:20

Nevermind, I just updated to the latest from SVN and the analog tuner of my hvr-1600 is working via s-video.

Nippywiffle · 2007-05-17, 19:43

Yeah, the problem is with OTA HD channels

sdalberg · 2007-05-19, 17:50

same problem here.

everything works great under MP+SVN, but with TVE3, audio and video pins get mismapped.

garry · 2007-05-23, 20:21

s-video isn't working on my hvr-1600 with the latest svn - I get "unable to start timeshifting, no video/audio detected". Anyone else having the same problem?

CrazChris · 2007-05-23, 23:20

I am having exactly the same problem as Nippywiffle. My setup is also very similar. Is everyone having this issue with the Hauppauge HVR-1600??

Did anyone come up with a work around?

garry · 2007-05-31, 20:08

My s-video problem ("unable to start timeshifting, no video/audio detected") seems to have been fixed by the latest HVR-1600 drivers.

sdalberg · 2007-05-31, 20:26

Garry, he is using the ATSC input, not svideo, i think you had a completely unrelated problem.

fforde · 2007-06-12, 20:51

I am also having issues with ATSC video. I am running the June 4th SVN version. Works fine with the 0.2 TV Engine. TV Server finds the channels but only plays audio.

2007-05-17, 05:35	#1 (permalink)
Nippywiffle Portal Member Join Date: May 2007 Posts: 51 Thanks: 0 Thanked 0 Times in 0 Posts Country:	No ATSC video displayed TV-Server Version: 05-16-2007--01-21h--Rev14637 MediaPortal Version: svn--05-16-2007--00-59-Rev14637 MediaPortal Skin: standard Windows Version: XP SP2 CPU Type: Athlon XP 3200+ HDD: 500GB Memory: 768MB Motherboard: Abit AN7 Motherboard Chipset: Nvidia nForce Video Card: AGP Nvidia Geforce 6800 GTS Video Card Driver: 93.71 Sound Card: Onboard Nvidia nForce Sound Card AC3: Sound Card Driver: 6.14.457.0 1. TV Card: Hauppauge HVR-1600 1. TV Card Type: ATSC / Analogue 1. TV Card Driver: 3.4B (1.62.24326.0) MPEG2 Video Codec: Nvidia Purevideo latest version MPEG2 Audio Codec: Nvidia Purevideo latest version Satelite/CableTV Provider: Antenna Remote: Hauppauge 45 button Using TV Server: Analogue channels work fine, but ATSC channels do not display. You can hear audio, but see no video. Have tried other decoders (cyberlink, dscaler etc) Have tried different cominations of video and audio decoders also. Have tried disabling the analogue part of the card, and just using ATSC. You can timeshift this audio, but still get no video on playback. I get video and audio using other software.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATSC either sound or video, not both	wishywashy	Get Support	21	2007-06-28 00:54
No Video - ATSC	jim tressler	pre 1.0 RC1	3	2007-05-23 22:52
Cannot get video for ATSC signal	tcj2001	General Talk	1	2007-03-28 17:35
#896 - [video] OSD-skin-bug: progressbar is displayed false while pause	chefkoch	fixed 0.2.2.0 bugs	1	2007-01-25 20:28
No Video Displayed	mred589	Codecs, External Players	3	2006-01-23 00:25

2007-05-17, 16:24	#2 (permalink)
garry Portal Member Join Date: Dec 2005 Location: California Posts: 161 Thanks: 0 Thanked 6 Times in 3 Posts Country:	Are using analog for OTA channels or s-video/composite input? I can't get s-video to work on my HVR-1600.

2007-05-17, 18:20	#3 (permalink)
garry Portal Member Join Date: Dec 2005 Location: California Posts: 161 Thanks: 0 Thanked 6 Times in 3 Posts Country:	Nevermind, I just updated to the latest from SVN and the analog tuner of my hvr-1600 is working via s-video.

2007-05-17, 19:43	#4 (permalink)
Nippywiffle Portal Member Join Date: May 2007 Posts: 51 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Yeah, the problem is with OTA HD channels

2007-05-19, 17:50	#5 (permalink)
sdalberg Portal Member Join Date: Mar 2007 Location: Sacramento, CA Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts Country:	same problem here. everything works great under MP+SVN, but with TVE3, audio and video pins get mismapped.

2007-05-23, 20:21	#6 (permalink)
garry Portal Member Join Date: Dec 2005 Location: California Posts: 161 Thanks: 0 Thanked 6 Times in 3 Posts Country:	s-video isn't working on my hvr-1600 with the latest svn - I get "unable to start timeshifting, no video/audio detected". Anyone else having the same problem?

2007-05-23, 23:20	#7 (permalink)
CrazChris Portal User Join Date: May 2007 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I am having exactly the same problem as Nippywiffle. My setup is also very similar. Is everyone having this issue with the Hauppauge HVR-1600?? Did anyone come up with a work around?

2007-05-31, 20:08	#8 (permalink)
garry Portal Member Join Date: Dec 2005 Location: California Posts: 161 Thanks: 0 Thanked 6 Times in 3 Posts Country:	My s-video problem ("unable to start timeshifting, no video/audio detected") seems to have been fixed by the latest HVR-1600 drivers.

2007-05-31, 20:26	#9 (permalink)
sdalberg Portal Member Join Date: Mar 2007 Location: Sacramento, CA Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Garry, he is using the ATSC input, not svideo, i think you had a completely unrelated problem.

2007-06-12, 20:51	#10 (permalink)
fforde Portal Member Join Date: Jun 2007 Location: Texas Age: 27 Posts: 525 Thanks: 43 Thanked 189 Times in 56 Posts Country:	I am also having issues with ATSC video. I am running the June 4th SVN version. Works fine with the 0.2 TV Engine. TV Server finds the channels but only plays audio.