| |||||||
| Ongoing HTPC Projects In the process of building your own HTPC? |
![]() |
| | Thread Tools | Display Modes |
| | #1 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| Searching for a nice software for my Mediaportal i came up with this software. I was a little bit unhappy that it not supports intels I810 graphic ship (no direct x9 support) that was/is on my motherboard. So I decidet to take the case and build up a new HTPC. It´s still under developement. that´s my old MediaPortal: (from M. Technologies) Hardware: orig. Mediaportal: QDI-, Celeron 800MHz, 256MB, WinXP SP2, Hauppauge WinTV PVR 250, Cardreader, GLCD 128*64, 80GB Software: http://www.vorsorge-lehmann.de/multi...ediaportal.htm ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB |
| | |
| | #2 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| after a while I decidet to build in a GLCD ![]() ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB |
| | |
| | #3 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| ![]() ![]() ![]() ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB Last edited by Schmidti; 2006-12-11 at 10:24. |
| | |
| | #4 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| ![]() ![]() ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB Last edited by Schmidti; 2006-12-11 at 10:25. |
| | |
| | #6 (permalink) | |
| Guest
Posts: n/a
| Quote:
Dek | |
|
| | #7 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| ![]() ![]() ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB Last edited by Schmidti; 2006-12-11 at 10:27. |
| | |
| | #8 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| ![]() ![]() ![]() ![]() ![]() Here you can see the topview of the chassis including the installed Radeon 9550SE, 2 pictures of my IR-receiver including power-on (by button and IR), 2 color (green,red) LED and MIC-in. And you can see my GLCD incl. LPT cable.
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB Last edited by Schmidti; 2006-12-11 at 10:31. |
| | |
| | #9 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| Hi together, over Christmas I finished the case! :lol: See the final design for now! ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB Last edited by Schmidti; 2006-12-11 at 10:33. |
| | |
| | #10 (permalink) |
| Portal Member Join Date: Sep 2004 Location: Germany
Posts: 54
Thanks: 0
Thanked 0 Times in 0 Posts
| Final Hardware (until now) Case: modified Mediaportal case Power supply: 350 W standard with 12cm fan (air exhaust at the side) Mainboard: Asrock K7VT4A+ Ram: Kingston PC400 512MB Riser: 3xPCI riser card 32bit Graphic card: ATI RADEON 9550SE (cut down to low profile) TV-card : Hauppauge PVR 250, Typhoon PCI capture TV card (for EPG Tuner Philips 7134 for nxtvepg) DVD: Toshiba SD-M1402 DVD-ROM (original ) HD: Samsumg SV1604N, 160.0 GB, 5400 UPM space for second HD :wink: LCD: GLCD KS0108 128*64 connected to internal LPT (blue backlight) IR-receiver: receiver with power off function ( http://www.irshop.de.vu/ ) Buttons: 8 navigation buttons in the front (controled by dismantled chep 8 button joypad [Saturn 5€] Potis: 2 potentiometer for controling fan speed in front panel Cardreader : 6 in one USB 2.0 (colored black and modified to allow installation of HD underneath)
__________________ _________________ orig. Mediaportal case: Asrock KSVT4A+, AMD XP2500, 500MB RAM, WinXP SP2, Hauppauge PVR 250, Technisat CS2, Cardreader, DVD, KS0108 GLCD 128*64, Samsumg SV1604N 160GB |
| | |
![]() |
| Bookmarks |
| Tags |
| case, original, real |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| System requirements for HDTV with MediaPortal | Tech Geek | Hardware Selection Help | 62 | 2007-08-08 07:20 |
| A perfect HTPC with MP & PVR Scheduler & faster XP | STSC | Tips and Tricks | 16 | 2007-01-30 22:40 |
| Code for MCE remote | Anonymous | General Development (no feature request here!) | 3 | 2006-04-30 14:19 |
| [patch] DVB EPG ISO 6937 support | zdar | General Development (no feature request here!) | 0 | 2006-02-11 13:38 |
| Compile problems | Anonymous | General Development (no feature request here!) | 1 | 2004-04-28 21:49 |