PiipTV: LiveTV & remote PVR for Nokia Video Center - Page 5

crazyboy · 2008-07-16, 10:27

Quote:

Originally Posted by eskild

I just tried your plugin, and it rocks. I've tested it with both VLC and Nokia E51, and it works really well. I hope you don't mind, but i do have a couple of feature requests:

- i have multiple tv cards, and i would like to select which tv card the plugin should use.
- it would be nice if i could assign a channel group to the plugin that contains the channels i want to expose. Today all channels are exposed, even the encrypted ones that cannot be watched.

Keep up the good work, and please let me know if there is anything i can do to help out.

Hi eskild!! I've got the E51 too, but I can't install the plugin because I havent the nokia video center installed... where have you found it? Is your phone branded?

eskild · 2008-07-17, 20:37

Hi,
i found the Nokia Video Center in the download catalog. On the phone, go to menu -> download -> Internet -> Video Center.

Hope this helps.

marplar · 2008-07-30, 22:50

Sadlo I had a similar problem to you. I followed the instructions below from the ms technet site and it started working. I am using Vista 64bit.

"Add the following registry value (DWORD type) set to 0xFFFFFFFF:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip6\Parameters\DisabledComponents

This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect."

Sadlo · 2008-08-05, 18:23

Thanks a lot!!!!
It works GREAT!!!!

manniainen · 2008-08-07, 15:55

TIP:

If any is having problems with streaming, so that phone receives picture correctly about one minute, and then it's stops. Downgrade your VLC from 0.8.6 i-version to h-version

This is what i have been fighting one day

http://www.mantis.team-mediaportal.com/view.php?id=1470

manniainen · 2008-08-07, 20:43

Hi,

I have now solution to this windows vista ipv6 case. I would appreciate if someone could test if my solution works

Once someone could confirm that fix works I'am taking it to 'official' release

send me email and i will reply to you with version that has this ipv6 fix...

tourettes · 2008-08-07, 22:28

Quote:

Originally Posted by manniainen

TIP:

If any is having problems with streaming, so that phone receives picture correctly about one minute, and then it's stops. Downgrade your VLC from 0.8.6 i-version to h-version

This is what i have been fighting one day

0001470: after 45seconds RTSP client session created inside manual control "times out" - MediaPortal Bugtracker

#1617 (Problem view Free Multiposte with 0.8.6h on Mac) - VLC - Trac

manniainen · 2008-08-20, 19:03

19.8.2008

Holiday season is over and new 0.5.6.17 release is out!

Release content:
+ Added notification to statuspane UI that clip converting is in progress, which is reason for high cpu usage
+ TCP interleaved protocol detection -> fixed
+ http -server crash -> fixed
+ From address array select ipv4 instead of ipv6 address, affects many Windows Vista users ->fixed
+ Crash if recording folder is not created -> fixed
+ Timestamp calculation -> fixed
+ When copying big TS file to rec -folders, mpeg4 convert starts immediately until file is not fully copied ->fixed
+ Web UI VLC pop-up plugin, some images missing -> missing images added
+ One localisation to VLCcontrols.js "Voulez vous relancer votre flux avec ces parameters?" -> "Do you want to restart the stream with these parameters?"
+ New version of Revolunet VLCcontrols updated to piipTV usage
+ "tv-uutiset, saa ja urheilu.ts", seems that that clip cannot be converted to mpeg4, maybe ' , ' is bad mark -> parcing ' , ' -> '_'

Get it from http://piiptv.japo.fi/

hingstin · 2008-08-27, 13:19

Hi

i have tested this piiptv but i cant get it to work on my N95 8gb
i have tryed install the "Video Center Provision File"
the only thing i can get when i start "piip tv live..." is:

Code:

updating prog. guide

but nothing happends.

i can get picture over WAN in vlc (about 20min then it stops, but the its to press "play" (in vlc) and pic. is back)

where can i found these config files in my phone (those one that "Video Center Provision File" is generating)

~G

manniainen · 2008-08-27, 15:14

Hi,

When you click provisioning file in WEB UI, it will add service to your phone's video center. Then open video center and you will see piipTV live. Under video center "internet videos" you can see also video feeds that has your recorded clips.

And if you have lot of channels and EPG program data is received for many days, updating EPG first time is taking really long time, just be patient!

Once program guide is updated to phone you can start to watch channels...

If this does not help, send me email piiptv@japo.fi and i can try your service with my N95

2008-08-07, 20:43	#46 (permalink)
manniainen Portal Member Join Date: Apr 2008 Posts: 26 Thanks: 0 Thanked 2 Times in 1 Post	Hi, I have now solution to this windows vista ipv6 case. I would appreciate if someone could test if my solution works Once someone could confirm that fix works I'am taking it to 'official' release send me email and i will reply to you with version that has this ipv6 fix... Last edited by manniainen; 2008-08-07 at 20:45.

2008-08-27, 13:19	#49 (permalink)
hingstin Portal User Join Date: Sep 2007 Age: 38 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Hi i have tested this piiptv but i cant get it to work on my N95 8gb i have tryed install the "Video Center Provision File" the only thing i can get when i start "piip tv live..." is: Code: updating prog. guide but nothing happends. i can get picture over WAN in vlc (about 20min then it stops, but the its to press "play" (in vlc) and pic. is back) where can i found these config files in my phone (those one that "Video Center Provision File" is generating) ~G

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://forum.team-mediaportal.com/plugins-47/piiptv-livetv-remote-pvr-nokia-video-center-38598/
Posted By	For	Type	Date
Streaming For PC to Phone - 3G forum : your 3G community and resource.	This thread	Refback	2008-08-27 11:25
Freeware PiipTv XMLTV / IPTV plugin for Mediaportal & Nokia N95	This thread	Refback	2008-07-21 13:31
AVForum -> MediaPortal	This thread	Refback	2008-06-18 20:04

2008-07-17, 20:37	#42 (permalink)
eskild Portal User Join Date: Feb 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts	Hi, i found the Nokia Video Center in the download catalog. On the phone, go to menu -> download -> Internet -> Video Center. Hope this helps.

2008-07-30, 22:50	#43 (permalink)
marplar Portal User Join Date: May 2008 Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Sadlo I had a similar problem to you. I followed the instructions below from the ms technet site and it started working. I am using Vista 64bit. "Add the following registry value (DWORD type) set to 0xFFFFFFFF: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\Tcpip6\Parameters\DisabledComponents This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect."

2008-08-05, 18:23	#44 (permalink)
Sadlo Portal Member Join Date: Feb 2008 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts	Thanks a lot!!!! It works GREAT!!!!

2008-08-07, 15:55	#45 (permalink)
manniainen Portal Member Join Date: Apr 2008 Posts: 26 Thanks: 0 Thanked 2 Times in 1 Post	TIP: If any is having problems with streaming, so that phone receives picture correctly about one minute, and then it's stops. Downgrade your VLC from 0.8.6 i-version to h-version This is what i have been fighting one day http://www.mantis.team-mediaportal.com/view.php?id=1470

2008-08-20, 19:03	#48 (permalink)
manniainen Portal Member Join Date: Apr 2008 Posts: 26 Thanks: 0 Thanked 2 Times in 1 Post	19.8.2008 Holiday season is over and new 0.5.6.17 release is out! Release content: + Added notification to statuspane UI that clip converting is in progress, which is reason for high cpu usage + TCP interleaved protocol detection -> fixed + http -server crash -> fixed + From address array select ipv4 instead of ipv6 address, affects many Windows Vista users ->fixed + Crash if recording folder is not created -> fixed + Timestamp calculation -> fixed + When copying big TS file to rec -folders, mpeg4 convert starts immediately until file is not fully copied ->fixed + Web UI VLC pop-up plugin, some images missing -> missing images added + One localisation to VLCcontrols.js "Voulez vous relancer votre flux avec ces parameters?" -> "Do you want to restart the stream with these parameters?" + New version of Revolunet VLCcontrols updated to piipTV usage + "tv-uutiset, saa ja urheilu.ts", seems that that clip cannot be converted to mpeg4, maybe ' , ' is bad mark -> parcing ' , ' -> '_' Get it from http://piiptv.japo.fi/

2008-08-27, 15:14	#50 (permalink)
manniainen Portal Member Join Date: Apr 2008 Posts: 26 Thanks: 0 Thanked 2 Times in 1 Post	Hi, When you click provisioning file in WEB UI, it will add service to your phone's video center. Then open video center and you will see piipTV live. Under video center "internet videos" you can see also video feeds that has your recorded clips. And if you have lot of channels and EPG program data is received for many days, updating EPG first time is taking really long time, just be patient! Once program guide is updated to phone you can start to watch channels... If this does not help, send me email piiptv@japo.fi and i can try your service with my N95