Bug in zoom-out ??? - Page 3

McSeven · 2007-03-07, 16:00

I'm a bit confused now. lkuech, could you share your latest compilation as ready-made dll? would like to test that on my own pictures, if possible

*THANKS*
Seven

lkuech · 2007-03-07, 16:18

I hope this is really the latest

Cu
Lars

Edit: Attachment removed...

lkuech · 2007-03-08, 05:52

The fix is now part of the current SVN (13273). Thx DalaNorth & rtv

CU
Lars

McSeven · 2007-03-09, 03:18

Hi lkuech,
sorry to bother you again. I installed the latest SVN and tested
with my photographs. My screen resolution is 1280x1024, the
skin is BlueTwo. I created max-sized (in configuration) thumbnails.

So, when clicking on a picture bigger than screensize, all works fine.
The picture is displayed fit to screen and zoom levels with 1-9 work
fine. Also switching to next picture with my arrow keys is ok.

But: When I click on a picture smaller than screenres it will be
displayed at its original pixel size. Zoomlevels sometimes only
work 1-5 or 1-6 (which of course makes sense, since bigger zoom
levels would result in some huge square pixels; 1=actual pixel
size, 2=fit to screen, 3=1st zoom level). Switching to next picture
only works when in zoom level 1 (actual pixel size).

So I'd have to ask two big favours for a future svn:

- Could you display pictures smaller than actual resolution
fit to screen as default instead of their actual pixel size (or
make it a configurable option); i.e. if image smaller than
screen resolution then defaultzoomlevel=2?

- could you enable switching forward/backward for smaller
than screensize images in zoomlevel 1 (actual pixelsize)
and 2 (fit to screen), since in both views there is no clipping
area ("bildausschnitt") to be moved around by the arrow keys?

:THANKS:
Seven

lkuech · 2007-03-09, 06:26

Hi McSeven.

I will take a look at it by time... but without promising anything

The problem this this module is that its viewing picture functionality shares a lot of functions with its slideshow functionality. Because of this, changes on the one side may create side effects on the other side.
A much more annoying, at least from my point of view, is the fact that when zooming in from "fit to screen" you always zoom to the upper left corner instead of the center. Your have to move the clipping area to the section you interesed in, which is in the center of the picture much more often than in the corner

Of course this is an effect that only occurs if your images are much bigger than your screen resolution.

CU
Lars

2007-03-07, 16:18	#22 (permalink)
lkuech Portal Developer Join Date: Feb 2007 Location: Hamburg Age: 34 Posts: 551 Thanks: 28 Thanked 44 Times in 18 Posts Country: My System	I hope this is really the latest Cu Lars Edit: Attachment removed... Last edited by lkuech; 2007-03-08 at 05:49.

2007-03-08, 05:52	#23 (permalink)
lkuech Portal Developer Join Date: Feb 2007 Location: Hamburg Age: 34 Posts: 551 Thanks: 28 Thanked 44 Times in 18 Posts Country: My System	The fix is now part of the current SVN (13273). Thx DalaNorth & rtv CU Lars Last edited by lkuech; 2007-03-08 at 06:05.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
#920 - [pictures] zoom out less than 99% is not working & zoomOSD is not shown again	chefkoch	fixed 0.2.0.0 bugs	4	2006-11-27 14:56
Zoom : adding 'no aspect ratio change' in general settings	miljbee	Improvement Suggestions	61	2006-11-10 14:54
New tumbnail zoom view	mirk	Improvement Suggestions	2	2006-09-30 13:45
PVR500 only 1 Tuner working	rovalis	General Support	2	2006-03-09 15:13
MyVideos : progessive zoom	Anonymous	Improvement Suggestions	0	2005-01-11 05:43

2007-03-07, 16:00	#21 (permalink)
McSeven Portal Member Join Date: Feb 2007 Posts: 60 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I'm a bit confused now. lkuech, could you share your latest compilation as ready-made dll? would like to test that on my own pictures, if possible THANKS Seven

2007-03-09, 03:18	#24 (permalink)
McSeven Portal Member Join Date: Feb 2007 Posts: 60 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi lkuech, sorry to bother you again. I installed the latest SVN and tested with my photographs. My screen resolution is 1280x1024, the skin is BlueTwo. I created max-sized (in configuration) thumbnails. So, when clicking on a picture bigger than screensize, all works fine. The picture is displayed fit to screen and zoom levels with 1-9 work fine. Also switching to next picture with my arrow keys is ok. But: When I click on a picture smaller than screenres it will be displayed at its original pixel size. Zoomlevels sometimes only work 1-5 or 1-6 (which of course makes sense, since bigger zoom levels would result in some huge square pixels; 1=actual pixel size, 2=fit to screen, 3=1st zoom level). Switching to next picture only works when in zoom level 1 (actual pixel size). So I'd have to ask two big favours for a future svn: - Could you display pictures smaller than actual resolution fit to screen as default instead of their actual pixel size (or make it a configurable option); i.e. if image smaller than screen resolution then defaultzoomlevel=2? - could you enable switching forward/backward for smaller than screensize images in zoomlevel 1 (actual pixelsize) and 2 (fit to screen), since in both views there is no clipping area ("bildausschnitt") to be moved around by the arrow keys? :THANKS: Seven

2007-03-09, 06:26	#25 (permalink)
lkuech Portal Developer Join Date: Feb 2007 Location: Hamburg Age: 34 Posts: 551 Thanks: 28 Thanked 44 Times in 18 Posts Country: My System	Hi McSeven. I will take a look at it by time... but without promising anything The problem this this module is that its viewing picture functionality shares a lot of functions with its slideshow functionality. Because of this, changes on the one side may create side effects on the other side. A much more annoying, at least from my point of view, is the fact that when zooming in from "fit to screen" you always zoom to the upper left corner instead of the center. Your have to move the clipping area to the section you interesed in, which is in the center of the picture much more often than in the corner Of course this is an effect that only occurs if your images are much bigger than your screen resolution. CU Lars