CybrDisplay External Status Plugin - Page 3

konrad · 2008-02-06, 03:20

Hi, I have a some problems with this plugin. I have a silverstone GD01B-MXR case with OEM LCD. Plugin works fine until system restart. Then I have to turn off media portal and change in iMON FrontView to Automaticly (plugin changes to "Never"). In 5.02.08 I obtain an error with controlling by remote (my mediaportal .IMO profile is disable and buttons on remote isn't work properly). With prev verison my LCD don't switch off - now it work properly.

fetredlwl · 2008-02-06, 08:30

Hey, thanks for your answer...
I have got a Silverstone LC20M with an iMON VFD included.
The IMON Manager Version is: iMON Manager ver 7.00.1112 (Silverstone) and the F/W is: iMON Firmware Ver 0x360101 VFD OEM HID.
I also tried to use the new iMON Manager but it didin't work either with MP and I was mssing the option to shut the display down.
Andy

kurtko · 2008-02-06, 12:34

Quote:

Originally Posted by cybrmage

Hmmm... After the comments you made about my TouchScreen plugin.... (In a new thread, where I didn't see it for almost a week... without any comments or suggestions in the support thread)... I'm surprised that you are asking me about TouchScreen support in this plugin...

Hi cybrmage,
I'm from Spain and it's very difficult for me to talk english. My intentions were not bother you. You work is very good and I am grateful you for that.

My comments about your touchscreen plugin no had bad intentions. I said that the plugin is very good.

The post of a new thread was trying to find solutions for Imon Touchcreen users.

routerunner · 2008-02-08, 10:17

Hi Cyberimage,

I'm using you fantastic plugin, heaven for my Zalman HD135.

I've got a question for you, I noticed that every time MP is launched the very first remote key I press is lost, but from the second one is working as expected, any thought? Does it happens to you as well?

again thank you very much and keep up the good work ;-)

GroundZeroX · 2008-02-08, 10:25

Quote:

Originally Posted by routerunner

Hi Cyberimage,

I'm using you fantastic plugin, heaven for my Zalman HD135.

I've got a question for you, I noticed that every time MP is launched the very first remote key I press is lost, but from the second one is working as expected, any thought? Does it happens to you as well?

again thank you very much and keep up the good work ;-)

I have a Problem with the Remote. It doesnt work. The Display works fine. Have somebody an Idea?

regards
Marcel

routerunner · 2008-02-08, 10:34

Check the "Disable Remote" tick box is not set in the plugin advanced configuration

Matty · 2008-02-08, 12:43

Quote:

Originally Posted by cybrmage

Quote:

Originally Posted by Matty

1). Under CybrDisply -> configuration -> advanced, the Equalizer Options are all disable?

that has been fixed.

CybrMarge,

Great job, the equalizer works a charm.

Thanks

Matt

GroundZeroX · 2008-02-08, 16:56

Quote:

Originally Posted by routerunner

Check the "Disable Remote" tick box is not set in the plugin advanced configuration

Yes it works.

Big Thanks

fetredlwl · 2008-02-15, 18:23

Great work, with the new Version my Imon VFD works fine.
But I've got the same problem, my Remote doesn't work anymore. I don't see an option where it might be disabled.
When i close Media Portal the Remote starts back working again.

cybrmage · 2008-02-15, 23:04

new version

2008-02-15, 18:23	#29 (permalink)
fetredlwl Portal Member Join Date: Jan 2008 Posts: 25 Thanks: 1 Thanked 0 Times in 0 Posts	Great work, with the new Version my Imon VFD works fine. But I've got the same problem, my Remote doesn't work anymore. I don't see an option where it might be disabled. When i close Media Portal the Remote starts back working again. Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Display Plugin	nativeundying	Plugins/Erweiterungen	2	2008-09-09 20:33
date and time in standby/hypernation-mode. yes its possible! cybrmage plse read this!	parkuhr	Support	5	2007-12-03 21:18
External Display Plugin	diskeeper	Plugins/Erweiterungen	0	2007-01-27 12:10
External display plugin	bonz007	Plugins	5	2006-03-02 16:08
LCD display plugin	Anonymous	Plugins	2	2005-03-28 12:40

2008-02-06, 03:20	#21 (permalink)
konrad Portal Member Join Date: Jan 2007 Age: 22 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hi, I have a some problems with this plugin. I have a silverstone GD01B-MXR case with OEM LCD. Plugin works fine until system restart. Then I have to turn off media portal and change in iMON FrontView to Automaticly (plugin changes to "Never"). In 5.02.08 I obtain an error with controlling by remote (my mediaportal .IMO profile is disable and buttons on remote isn't work properly). With prev verison my LCD don't switch off - now it work properly.

2008-02-06, 08:30	#22 (permalink)
fetredlwl Portal Member Join Date: Jan 2008 Posts: 25 Thanks: 1 Thanked 0 Times in 0 Posts	Hey, thanks for your answer... I have got a Silverstone LC20M with an iMON VFD included. The IMON Manager Version is: iMON Manager ver 7.00.1112 (Silverstone) and the F/W is: iMON Firmware Ver 0x360101 VFD OEM HID. I also tried to use the new iMON Manager but it didin't work either with MP and I was mssing the option to shut the display down. Andy

2008-02-08, 10:17	#24 (permalink)
routerunner Portal Member Join Date: Sep 2007 Posts: 12 Thanks: 0 Thanked 1 Time in 1 Post	Hi Cyberimage, I'm using you fantastic plugin, heaven for my Zalman HD135. I've got a question for you, I noticed that every time MP is launched the very first remote key I press is lost, but from the second one is working as expected, any thought? Does it happens to you as well? again thank you very much and keep up the good work ;-)

2008-02-08, 10:34	#26 (permalink)
routerunner Portal Member Join Date: Sep 2007 Posts: 12 Thanks: 0 Thanked 1 Time in 1 Post	Check the "Disable Remote" tick box is not set in the plugin advanced configuration

2008-02-15, 23:04	#30 (permalink)
cybrmage Portal Developer Join Date: May 2007 Posts: 498 Thanks: 1 Thanked 78 Times in 39 Posts Country:	new version