CybrDisplay External Status Plugin

[Zappza]

Put me on the list of updated "Test Display" functionality!

[balu0325]

Thank's for this plugin, realy great job!

But I have a problem with it. I use an Imon Type C LCD (in Thermaltake DH101 case) and it works very-very slow. I tired to change the port and LCD type settings, but nothing happend. Now I tired to use the 24.04.2008 version, but the problem is the same. The LCD refresh itself ca. 18-20 sec.

[ravenrocks]

Originally Posted by cybrmage

What does the latest driver do with the display... I recently changed the 3Rsystems code due to new information posted in the SoundGraph forums...

Like I said in my post (from february ) it does nothing but show the words Home and then doesn't change, I have tried your latest version as well without any luck. Do you have time to look into this? i'm greatful for all your help.

/Patrik

[balu0325]

Originally Posted by balu0325

Thank's for this plugin, realy great job!

But I have a problem with it. I use an Imon Type C LCD (in Thermaltake DH101 case) and it works very-very slow. I tired to change the port and LCD type settings, but nothing happend. Now I tired to use the 24.04.2008 version, but the problem is the same. The LCD refresh itself ca. 18-20 sec.

Today I tired with MP 0.2.3.0 and it works great. but with RC1 is it very slow. What is the poblem

PLZ Help.

[balu0325]

Originally Posted by balu0325

Today I tired with MP 0.2.3.0 and it works great. but with RC1 is it very slow. What is the poblem

PLZ Help.

And the front panel buttons doing nothing.

[RICHARDG]

does anyone know wher eone gets this driver

crystalfontz character lcd driver v04_17_2008

[dmsergei]

Dear Cybrmage!
Answer me please - HELP!!!
I cannot adjust work iMON LCD + iMON PAD remote - does not work iMON PAD!!!(came with ThermalTake DH101)
Does not react to pressing of buttons - thus LCD operates normally!!!

How it can be adjusted??

Thank's for this plugin, realy great job!

[ChrisOfCatford]

Hello again,

Please please please, could anyone tell me how to cinfigure this plugin?

As stated before, I have an Originae VFD with remote which uses IRtrans drivers and works with LCD Smartie.

How do I configure this plugin for my setup?

I asked before, do I need IRtrans and LCD Smartie running, or does this work in a different way?

Please... Someone must know how to do this????

Sorry for being thick (I was born that way :p )

Thanks,
Chris

[balu0325]

Originally Posted by ChrisOfCatford

Hello again,

Please please please, could anyone tell me how to cinfigure this plugin?

As stated before, I have an Originae VFD with remote which uses IRtrans drivers and works with LCD Smartie.

How do I configure this plugin for my setup?

I asked before, do I need IRtrans and LCD Smartie running, or does this work in a different way?

Please... Someone must know how to do this????

Sorry for being thick (I was born that way :p )

Thanks,
Chris

My friend has an Origenae case with VFD. I remeber, hi use only IR trans and "External Display" plugin by JoeDalton.

[ChrisOfCatford]

Hi balu0325,

Will try that.

I think I did already, but you never know.

Had LCD smartie loading at startup so this may have been conflicting.

Will post back when I have tried just in case anyone else is confused.

Thanks,
Chris

Hi,

Sorry, in my last post, I wrote LCDsmartie when I meant LCD Hype.

I have tried both ways, and still (LCDhype on/off) with no luck.

My current config is IRtrans server running, No other VFD/LCD software running.

LCDhype/IrTrans driver selected.

When clicking "Test display" in config, I get a short pause then back to where I was.

Nothing (other than the clock) appears on the VFD.

I tried both localhost and USB as port.

Is there anything else that I can try?

Thanks,
Chris