CybrDisplay External Status Plugin

[ezrangel]

Tks guys, Ill give 6.20.0830 a try.

[ezrangel]

Well, i tryed the 6.20.0830 driver but it was no good either. This time the display didnt freeze always but i was unable to sse anything new in the display, nor in test neither with MP running.
Here goes my log with this driver.

[cnikiel]

Originally Posted by cnikiel

This should be the download for imon ver.6.20.0830.

::oundGraph::: Innovation of Human on Digital Network

Its marked as being a BETA release, so that maybe why some people do not find it.
Will give this a try too as I miss the keyboard movement also.
Downloaded it already, but need to install it and test it.

Tested it now and everything is working fine.
The Ipad has now keyboard movement which makes selecting a LOT easier and faster.
The Display shows exactly what it should show and I am happier than ever.

The 6.01 or the 7.20 both did not work for me I needed to use the 6.20.0830 to get it the way I wanted.

[bois]

Hello!

First, Thanks for this plugin! I followed the work, by reading this and some other threads, impressive!

Now to the problem. After installing CybrDisplay I got the same problem as "zunixnuz". With the plugin running the display is working fine, but the iMon Pad remote control stops working. If I disabled CybrDisplay the remote starts to work again.


MediaPortal Version: V1.0.0.0 RC1
Windows Version: XP Pro SP 2
HTPC Case: Silverstone HTPC LC-16B-MR
Display: iMON VFD
Remote: iMon Pad

iMon Manager version 7.20.0502 (SilverStone)
iMon Firmware version 0x3601
CybrDisplayPlugin version 05_08_2008

__________________________________________________ ___

TV-Server Version:
MediaPortal Version: V1.0.0.0 RC1
MediaPortal Skin: Blue Two 0.2.3.0
Windows Version: Windows XP Pro SP 2
CPU Type: Intel P4 2.80GHz
HDD: Hitachi Deskstar 7K250 80GB Serial ATA + Maxtor 6, 200 GB SATA
Memory: 1024MB
Motherboard: Compaq MS-6732 (Durango)
Video Card: ATI Radeon 9700 Pro
Video Card Driver: 6.14.0010.6783
Sound Card: SB Audigy Audio [A400]
Sound Card AC3:
Sound Card Driver: 5.12.0001.1196
1. TV Card: Hauppauge WinTV PVR PCI II
1. TV Card Type: analog
1. TV Card Driver: 5.03.2600.2180
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone LC-16B-MR
Cooling: Zalman
Power Supply:
Remote: iMon PAD
TV:
TV - HTPC Connection:

[0burner0]

Hi i just installed MP on my new Antec HTCP but cant get the display to work i think i need this plugin installed it but what settings do i have to use (my LCD screen isnt responding) It works with MCE but want to use it with MP.

Had to restart and now it works !!!!!!!
Thnx for this plugin!!

[dakky]

EDIT: Stupid dakky ... the solution ist, that contrast and light are TOO high. set bot to 50 and works like a charm

thank a lot
dakky

TV-Server Version:
MediaPortal Version:
MediaPortal Skin:
Windows Version: Vista Ultimate SP1
CPU Type: AMD Athlon 4850e 2500MHz
HDD: 500GB WD Caviar GP SATA
Memory: 2048 MB DDR2 800
Motherboard: Gigabyte GA-MA 780GM-S2H
Video Card: ATI Radeon 3200 HD
Video Card Driver: Catalyst 8.6
Sound Card:
Sound Card AC3:
Sound Card Driver:
1. TV Card: Technisat SkyStar HD2
1. TV Card Type: DVB-S
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec:
Satelite/CableTV Provider:
HTPC Case: Silverstone GD01MX
Cooling: Scythe Shuriken
Power Supply: Seasonic S12II 380W
Remote:
TV: Samsung LE-40A558P3F
TV - HTPC Connection: HDMI


Hello Everbody. I need some help to get my imon lcd to work. i think im nearly done with this:
the display starts/stops with mediacenter. The problem is: i cant see anything. as soon as mediacenter enabled the display (or i start the test in the plugin conf) EVERTHING on the display is highlightet. every icon an every dot in the text field. anybody has an idea what to do in order to get this thing working?

mediaportal.log is appended ;9

dakky

[0burner0]

Is it posible to set the time to 24 hour mode?
Cant find it in config editor only #time.

[Zappza]

Dakky!
You could try to set the contrast bar to about 25%, and the brightness bar to 100%.
This did the job for me

[Galerio]

Hi all,

I discovered this forum just yersterday, and I've tried to make the CybrDisplay plugin work. It's the only thing I need to keep using MediaPortal.

After reading this topic, I have only one problem : The lcd front is quite unreadable. I mean the contrast is not good, since the letters are a little bit more highlited than the background. Of course, I tried to modify this using the contrast / brightness bars, but with no result. It's always the same.


I put the paramaters told by Raindeer :
(CybrDisplay External Status Plugin)

The only difference I have is the driver, i have the last one from Soundgraph (7.20....)
Do you think the driver is the cause of this problem ?

for your help.

MediaPortal Version: 1.0 RC1 / CybrDisplay : Soundgraph imon USB VDF/LCD PlugV_05_08_2008
LCD FW: 0x380102 LCD HID
Remote: Imon Pad
HTPC Case: Thermaltake DH 101

Windows Version: XP SP2
HDD: 500Go
Memory: 2Gb
Motherboard: Asus P5KSE
Video Card: RADEON 3450
Video Card Driver:
Sound Card: M-audio 1010lt
Cooling: Fan
Power Supply: Seasonic SII 430W
TV: Sharp 46X20e[/b]

[RCW]

Just wanted to say thanks to cybrmage for all your great work.
I have just upgraded to MP1 RC2 from 0.2.3 and the part I was dreading the most, getting the LCD in my Antec Fusion Black working, was so simple thanks to your plugin.



MediaPortal Version: 1.0 RC2
MediaPortal Skin: Blue Two (at the moment)
Windows Version: XP SP3
CPU Type: Intel P4 - 2.4GHz
Memory: 1GB PC2700
Motherboard: Intel D845GERG2
Video Card: HIS X1650 Pro Ice (fan removed, using Zalman VNF100 passive cooling)
Video Card Driver: 8.401
Sound Card: SoundBlaster 5.1
HTPC Case: Antec Fusion Black
Cooling: CPU: Zalman CNPS7000B-AlCu
Remote: Logitech Harmony 785
TV - HTPC Connection: S-Video