CybrDisplay External Status Plugin

[lsandini]

Originally Posted by Zappza

Dakky!
You could try to set the contrast bar to about 25%, and the brightness bar to 100%.
This did the job for me

Great,

My headache is now gone



Lorenzo

[Smitty2k1]

A note to all Antec Fusion 430 LCD users:

Don't update to the new version of iMON (7.4) it breaks the use of this plugin as far as I can tell. I now have a plain black LCD screen. I could re-install the old iMON drivers but then I would have to configure everything all over again.

[r_a_s_robin]

Then you did something wrong smitty. I just got the display working with iMON 7.4 and MP. The remote isn't working all that great so far but i'm not done tweaking yet.

[Pretoriano]

@Smitty2k1 and all the others having problems with cybrmage plugin and Imon latest drivers,be sure to set the plugin like in the attached screenshot.

@r_a_s_robin: try the attached imon remote settings that chemelli gived us time ago and i'm sure you will have no more trouble with your remote

[mrbert]

It works great with my antec fusion now.
One thing it seems to stop Imon and then the remote does not work any more. I now ticked all restart te imon driver boxes in the setup.
I can see navigation and track info so I can operate simple audio only things while the TV is off

For some reason the power button of the remote does not make it throug, so I can only standby the system via te sleepbutton om my temporay used keyboard

[Smitty2k1]

Originally Posted by Pretoriano

@Smitty2k1 and all the others having problems with cybrmage plugin and Imon latest drivers,be sure to set the plugin like in the attached screenshot.

@r_a_s_robin: try the attached imon remote settings that chemelli gived us time ago and i'm sure you will have no more trouble with your remote

Thanks!

[HTPC_Sourcer]

Originally Posted by mrbert

For some reason the power button of the remote does not make it throug, so I can only standby the system via te sleepbutton om my temporay used keyboard

There can be several reasons for the power button not functioning:

• Verify the power/energy settings in Windows. The power button needs to be set accordingly to trigger standby/hibernate.
• Check your PowerScheduler settings first to verify that Standby/Hibernate is not prevented.
• If none of this helps, you may want to check your hardware. My Silverstone LC16-M is supposed to be started/stopped with the iPad. To my great surprise when I looked at the disassembled hardware, the respective connectors on the small board were not wired. I had to solder this myself!

Regards, Johannes

[mrbert]

Hi I will need to check the vista powersettings.
But with the sleepbutton of the nowmal keyboad he system goed is some standby. ( screen is of, disk is still active.)
Without the Cybrdisplay the power button worked ( At least that is what I remember)

I can easy disable the plugin ad chek for this ofcourse when I am home

[HTPC_Sourcer]

Originally Posted by mrbert

But with the sleepbutton of the nowmal keyboad he system goed is some standby. ( screen is of, disk is still active.)

This is a standard Windows behavior and has nothing to do with the hardware. Windows (either Vista or XP) reacts to certain standard key presses whose function is defined in the registry. What you need to check is whether the remote power button works like the Power button of your case, that is switching the PC on from all power states - including off and hibernate!

Once you have verified the energy settings of Vista bring your PC on and stop MP and TV server. Then try to switch if off with the power button on the case to verifgy the function, then do the same thing again using the remote instead. If the remote doesn't switch the PC on and off you are having a hardware problem.

Good luck,
Johannes

[mrbert]

Hi when I disable Cybrdisplay the poweron of the remote functions.
If I enable Cybrdisplay the poweron of the remote does not work.
In both casses I see the messsage form IMON that the Power button is pressed.


Poweron of the PC works OK.



TV-Server Version: None
MediaPortal Version: V1.0RC2
MediaPortal Skin: standard
Windows Version: vista
CPU Type: AMD 4850
HDD: 750 GIG WB green
Memory: 4gig
Motherboard: gigabyte 780 mATX
Video Card: on board 3200
Video Card Driver:
Sound Card: on board
Sound Card AC3: SPDIF out
Sound Card Driver:
1. TV Card:
1. TV Card Type:
1. TV Card Driver:
2. TV Card:
2. TV Card Type:
2. TV Card Driver:
3. TV Card:
3. TV Card Type:
3. TV Card Driver:
4. TV Card:
4. TV Card Type:
4. TV Card Driver:
MPEG2 Video Codec:
MPEG2 Audio Codec:
h.264 Video Codec: coreavc
Satelite/CableTV Provider:
HTPC Case: antec fusion
Cooling: scyte ninja mini
Power Supply: antec
Remote: harmony one
TV: toshiba
TV - HTPC Connection: HDMI