MCE compatible display plugin... - Page 7

andreavb · 2007-03-08, 08:51

Hi all, is there some work in progress about this plugin? I have a Spectra FIC with Futaba 1.1 Display connceted to USB (works great with MCE and original Futaba driver), how can I make it work with MP? I used this plugin with MP 0.2.2.0 with latest SVN but it seems to freeze everytime a recording starts.

Is there any chance I can get my display to work with MP?

Topher5000 · 2007-03-11, 16:14

Quote:

Originally Posted by milhouse

Not sure why it took me so long to find this thread - this is exactly what I needed for my VL LIS MCE display. I can finally have it display what's on.

Is this still under development? It seems to (mostly) work under 0.2.2, but after a while it starts showing what'll be on in an hour, or two hours...I have to change the change and back to get it back to the current program.

Is 0.2.2 better for supplying the information you need?

Looking forward to an update...

Hi Milhouse. How'd you get this working for the VL LIS? I'm running WinXP, & if I try to run the LIS setup program, it says that the device isn't found.
I enabled this plugin, but all the display shows is the system info.

milhouse · 2007-03-11, 16:41

Topher-
It's been awhile, so I don't remember the details. But I know the VL LIS MCE connects by USB, and needs a USB-to-Serial driver. (I believe this was detected by Windows, and I let it find its own driver. But I am guessing this is the part you are missing, and this is the part I can least remember.) If it helps, I see a COM port in device manager for USB Serial Port. Driver provider is FTDI, version is 2.0.0.0.

With this driver installed, I just start up M.Play Home Center (the LIS software) and it detects the display with no trouble. I set it to Media Center for the display info. It works OK, but, as I mentioned above, seems to lose track of the time so it doesn't know what's on TV (then again, so does MP Web interface), and displays Unknown for videos that are ISOs.

Good luck, and let me know if you need more details.

Milhouse

stormbringer · 2007-03-14, 18:04

I hope it will be working with the latest svn.
Any chance , Joe? Or is this project dead? this would be a shame - it was so promissing.

Cheers
Storm

colincliff · 2007-03-16, 17:14

Another vote for keeping this project alive! i have a Elonex Artisan (same as a FIC Spectra) and emulating the MCE display commands seems to be the only way to get it to work.

Great work so far!

Topher5000 · 2007-03-21, 00:39

Milhouse, I found that I can start the LIS software from the system tray but not from the start menu.
I set the software to Media Center & set it to Media Center Videos. I set it to show line 1 as &PLAYTIMECG $AUTOINFO & line 2 as $PLAYTIMECG $ENTIME
When I play a movie, the display shows Media Center (Line 1) Unknown (Line 2).
When I stop the movie, it shows the elasped time in big numbers on the left & then 2 lines with the movie's name & the remaining time below that. Do you know how I can get it to display this info while the movie's playing?
Thanks for your help.

stormbringer · 2007-03-21, 09:35

Sorry - made a mistake - It´s working with the iMon VFD
Keep up that great work

JeromeF · 2007-03-29, 04:40

I was wondering if someone could help me. I have installed this plugin but am having some problems.

everytime i load MP it just crashes and closes.

I get this in the error log:
2007-03-29 03:33:47.296875 [ERROR][10]: MediaPortal: Unhandled exception occured
2007-03-29 03:33:47.296875 [ERROR][10]: Exception

ystem.TypeLoadException: Could not load type 'MediaPortal.Player.VideoPlayerVMR9wl' from assembly 'Core, Version=1.0.2546.32606, Culture=neutral, PublicKeyToken=null'.
at MCEDisplay.MCEDisplay.Run()
at System.Threading.ThreadHelper.ThreadStart_Context( Object state)
at System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
2007-03-29 03:33:47.296875 [ERROR][10]: Exception :Could not load type 'MediaPortal.Player.VideoPlayerVMR9wl' from assembly 'Core, Version=1.0.2546.32606, Culture=neutral, PublicKeyToken=null'.
2007-03-29 03:33:47.296875 [ERROR][10]: site :Void Run()
2007-03-29 03:33:47.296875 [ERROR][10]: source :MCEDisplay
2007-03-29 03:33:47.296875 [ERROR][10]: stacktrace: at MCEDisplay.MCEDisplay.Run()
at System.Threading.ThreadHelper.ThreadStart_Context( Object state)
at System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()

HanuIv · 2007-05-23, 20:00

Halo!

I was wondering what is the last "stable" version of this plugin. I downloaded version from start of this thread and it crashes my MP 0.2.2. I guess it is because of incompatibility between MCEdisplay plugin and MP 0.2.2.

Can someone help me, please?

milhouse · 2007-05-28, 06:41

Near as I can tell, I am using the version that ships with 0.2.2. I don't think you need to actually download it.

Checking Windows Explorer, the version of MCEDisplay.dll I am using with 0.2.2 stable (NOT SVN) is 1.0.2205.41529.

Hope this clears things up for you.

Milhouse

2007-03-08, 08:51	#61 (permalink)
andreavb Portal Member Join Date: Dec 2006 Age: 34 Posts: 133 Thanks: 1 Thanked 4 Times in 4 Posts Country: My System	Hi all, is there some work in progress about this plugin? I have a Spectra FIC with Futaba 1.1 Display connceted to USB (works great with MCE and original Futaba driver), how can I make it work with MP? I used this plugin with MP 0.2.2.0 with latest SVN but it seems to freeze everytime a recording starts. Is there any chance I can get my display to work with MP? __________________ Andrea Tincani AndreaVB Programming Il Portale per Lui e Lei

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LCD plugin supporting more than 70 display types (now with full graphics support!!!)	JoeDalton	Support	919	2007-04-19 12:08
Technotrend DVB-S no LNB switch	Erbsenkopp	General Support	0	2006-08-03 10:04
Technotrend Budget 1500 CI no LNB switch	Erbsenkopp	General Support	0	2006-08-03 09:46
Tuning-problem - FireDTV - Stockholm-Nacka	alek01	Installation, configuration support	2	2006-07-11 00:06
After first time entering .apefolder all files is unknown.	PHN2	The old Bugreport Forum	1	2006-03-15 17:28

2007-03-11, 16:41	#63 (permalink)
milhouse Portal Member Join Date: Nov 2006 Location: Minneapolis, MN U.S. Age: 34 Posts: 250 Thanks: 2 Thanked 16 Times in 15 Posts Country: My System	Topher- It's been awhile, so I don't remember the details. But I know the VL LIS MCE connects by USB, and needs a USB-to-Serial driver. (I believe this was detected by Windows, and I let it find its own driver. But I am guessing this is the part you are missing, and this is the part I can least remember.) If it helps, I see a COM port in device manager for USB Serial Port. Driver provider is FTDI, version is 2.0.0.0. With this driver installed, I just start up M.Play Home Center (the LIS software) and it detects the display with no trouble. I set it to Media Center for the display info. It works OK, but, as I mentioned above, seems to lose track of the time so it doesn't know what's on TV (then again, so does MP Web interface), and displays Unknown for videos that are ISOs. Good luck, and let me know if you need more details. Milhouse

2007-03-14, 18:04	#64 (permalink)
stormbringer Portal Member Join Date: Nov 2004 Posts: 255 Thanks: 1 Thanked 0 Times in 0 Posts	I hope it will be working with the latest svn. Any chance , Joe? Or is this project dead? this would be a shame - it was so promissing. Cheers Storm

2007-03-16, 17:14	#65 (permalink)
colincliff Portal Member Join Date: Sep 2005 Posts: 12 Thanks: 0 Thanked 0 Times in 0 Posts My System	Another vote for keeping this project alive! i have a Elonex Artisan (same as a FIC Spectra) and emulating the MCE display commands seems to be the only way to get it to work. Great work so far!

2007-03-21, 00:39	#66 (permalink)
Topher5000 Portal Member Join Date: Apr 2006 Posts: 158 Thanks: 0 Thanked 0 Times in 0 Posts	Milhouse, I found that I can start the LIS software from the system tray but not from the start menu. I set the software to Media Center & set it to Media Center Videos. I set it to show line 1 as &PLAYTIMECG $AUTOINFO & line 2 as $PLAYTIMECG $ENTIME When I play a movie, the display shows Media Center (Line 1) Unknown (Line 2). When I stop the movie, it shows the elasped time in big numbers on the left & then 2 lines with the movie's name & the remaining time below that. Do you know how I can get it to display this info while the movie's playing? Thanks for your help.

2007-03-21, 09:35	#67 (permalink)
stormbringer Portal Member Join Date: Nov 2004 Posts: 255 Thanks: 1 Thanked 0 Times in 0 Posts	Sorry - made a mistake - It´s working with the iMon VFD Keep up that great work

2007-03-29, 04:40	#68 (permalink)
JeromeF Portal Member Join Date: Dec 2006 Location: South West Age: 23 Posts: 49 Thanks: 1 Thanked 0 Times in 0 Posts Country: My System	I was wondering if someone could help me. I have installed this plugin but am having some problems. everytime i load MP it just crashes and closes. I get this in the error log: 2007-03-29 03:33:47.296875 [ERROR][10]: MediaPortal: Unhandled exception occured 2007-03-29 03:33:47.296875 [ERROR][10]: Exception ystem.TypeLoadException: Could not load type 'MediaPortal.Player.VideoPlayerVMR9wl' from assembly 'Core, Version=1.0.2546.32606, Culture=neutral, PublicKeyToken=null'. at MCEDisplay.MCEDisplay.Run() at System.Threading.ThreadHelper.ThreadStart_Context( Object state) at System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart() 2007-03-29 03:33:47.296875 [ERROR][10]: Exception :Could not load type 'MediaPortal.Player.VideoPlayerVMR9wl' from assembly 'Core, Version=1.0.2546.32606, Culture=neutral, PublicKeyToken=null'. 2007-03-29 03:33:47.296875 [ERROR][10]: site :Void Run() 2007-03-29 03:33:47.296875 [ERROR][10]: source :MCEDisplay 2007-03-29 03:33:47.296875 [ERROR][10]: stacktrace: at MCEDisplay.MCEDisplay.Run() at System.Threading.ThreadHelper.ThreadStart_Context( Object state) at System.Threading.ExecutionContext.Run(ExecutionCon text executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()

2007-05-23, 20:00	#69 (permalink)
HanuIv Portal Member Join Date: May 2007 Age: 38 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Halo! I was wondering what is the last "stable" version of this plugin. I downloaded version from start of this thread and it crashes my MP 0.2.2. I guess it is because of incompatibility between MCEdisplay plugin and MP 0.2.2. Can someone help me, please?

2007-05-28, 06:41	#70 (permalink)
milhouse Portal Member Join Date: Nov 2006 Location: Minneapolis, MN U.S. Age: 34 Posts: 250 Thanks: 2 Thanked 16 Times in 15 Posts Country: My System	Near as I can tell, I am using the version that ships with 0.2.2. I don't think you need to actually download it. Checking Windows Explorer, the version of MCEDisplay.dll I am using with 0.2.2 stable (NOT SVN) is 1.0.2205.41529. Hope this clears things up for you. Milhouse