Touchscreen LCD display Plugin - Page 8

fairchild · 2008-01-31, 18:30

can I please have the source code, i would like to continue development on the plugin

pisassi · 2008-02-20, 13:59

I don't understand. Eveyone else seems to have got it to work...

I'm running Windows Vista 32bit on an ZALMAN HD160XT Plus (I think rev 2 or 3 - I bought it in DECEMBER 2007).

I'm running MediaPortal 0.2.3, Configured my 7" screen as a secondary display to my extended desktop and added the TouchScreen plugin.

I enabled under plug-ins the TouchScreen plugin, and the ExternalDisplay.

When I launch MediaPortal I see the external display on my touch screen but have two problems:

1/ It's larger than my screen - which is configured at 1024x768.

2/ No touch action ! I cannot seem to activate anything using finger touches.

I'm not 100% sure what type/make of device it is or what port it is running on. Nothing obvious shows up in Device Manager.

Under Plug-ins in MPConfiguration > External Display -> Configuration - What should I choose for Type and Port ??

Thanks -

DaHooka · 2008-02-20, 14:10

For Touscreens, i got the X15e u have to configure the touchscreen as prefered screen (first screen) and then your problems should be fixed

pisassi · 2008-02-21, 01:12

DaHooka,

Apologies - but - can you elaborate please ? What is the X15e ? is that the make of touchscreen I have in the my ZALMAN ?

Or is it a piece of software ? Sorry - not familiar with the term.

berggren · 2008-02-21, 08:11

Quote:

Originally Posted by pisassi

DaHooka,
Apologies - but - can you elaborate please ? What is the X15e ? is that the make of touchscreen I have in the my ZALMAN ?
Or is it a piece of software ? Sorry - not familiar with the term.

The X15e is a chassi by a company called Origaen (spelling?) so it´s not the make of your touchscreen nor a software.

pisassi · 2008-02-21, 08:57

Ok. thanks I see -. Not being the same touch screen manufacturer would have a lot to do with it, which is why I mentioned what hardware I was running.

On the ZALMAN, with the touch screen as the main window (that has the task bar) and as the secondary one, I still have no touch action.

Others do have the same chassis as I do, and have got it working -

Anyone else got a (fairly) recent ZALMAN hd160XT Plus and got this working please?

dsilinski · 2008-02-21, 15:18

I have a Zalman HD160Xt, not plus, and I got it working. The only thing I noticed was that I had to be a little more careful with the touchscreen. I had to hold my touch a little longer for it to work.

Theodor · 2008-02-21, 22:34

I have the Zalman HD160 XT Plus and it is working when enabelig the terrible iMON software...

My questions about iMON:
iMON replacement drivers wanted! - MediaPortal Forum

My.stAr · 2008-02-27, 22:21

@Cybrmage: Thx for the nice plugin, also works with my case. (HD160XT rev.3)

Just have one problem: when the plugin is enanbled, MP is always on top. How to change this?
I need this because of another plugin "HD Player", here MP must be minimized, but it doesn't, instead it's... on top

Thx in advance

SChris · 2008-03-17, 18:25

Hello,
i also use the touchscreen plugin with my zalman 160XT.
it works great, but after closing and restarting mp my touchscreen resolution changes automatically
to 600x400.
this happens only, when the touchscreen plugin is enabled

2008-02-20, 13:59	#72 (permalink)
pisassi Portal User Join Date: Feb 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Can't get it to work.... I don't understand. Eveyone else seems to have got it to work... I'm running Windows Vista 32bit on an ZALMAN HD160XT Plus (I think rev 2 or 3 - I bought it in DECEMBER 2007). I'm running MediaPortal 0.2.3, Configured my 7" screen as a secondary display to my extended desktop and added the TouchScreen plugin. I enabled under plug-ins the TouchScreen plugin, and the ExternalDisplay. When I launch MediaPortal I see the external display on my touch screen but have two problems: 1/ It's larger than my screen - which is configured at 1024x768. 2/ No touch action ! I cannot seem to activate anything using finger touches. I'm not 100% sure what type/make of device it is or what port it is running on. Nothing obvious shows up in Device Manager. Under Plug-ins in MPConfiguration > External Display -> Configuration - What should I choose for Type and Port ?? Thanks -

2008-02-21, 22:34	#78 (permalink)
Theodor MP Donator Join Date: Dec 2005 Location: Løten Posts: 17 Thanks: 3 Thanked 8 Times in 5 Posts Country: My System	I have the Zalman HD160 XT Plus and it is working when enabelig the terrible iMON software... My questions about iMON: iMON replacement drivers wanted! - MediaPortal Forum __________________ - Theodor Don’t run out of altitude and ideas all at the same time...!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Updated iMON (Soundgraph) LCD Driver	ralphy	Support	680	2008-10-06 20:04
Touchscreen 7" LCD Configuration	Giorgio_ap	Support	17	2007-12-18 12:48
update SVN with new display driver	andreavb	General Support	1	2007-09-27 13:05
Driver Available for Soundgraph OEM LCD / UltraBay	ralphy	Support	38	2007-08-30 22:58
Touchscreen/lcd (X15e) to control MP to play music/video	ZeiZei	MediaPortal 1 Talk	0	2005-11-21 13:43

2008-01-31, 18:30	#71 (permalink)
fairchild Portal Member Join Date: Aug 2006 Posts: 38 Thanks: 1 Thanked 1 Time in 1 Post	can I please have the source code, i would like to continue development on the plugin

2008-02-20, 14:10	#73 (permalink)
DaHooka Portal Member Join Date: Aug 2006 Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts	For Touscreens, i got the X15e u have to configure the touchscreen as prefered screen (first screen) and then your problems should be fixed

2008-02-21, 01:12	#74 (permalink)
pisassi Portal User Join Date: Feb 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	DaHooka, Apologies - but - can you elaborate please ? What is the X15e ? is that the make of touchscreen I have in the my ZALMAN ? Or is it a piece of software ? Sorry - not familiar with the term.

2008-02-21, 08:57	#76 (permalink)
pisassi Portal User Join Date: Feb 2008 Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Ok. thanks I see -. Not being the same touch screen manufacturer would have a lot to do with it, which is why I mentioned what hardware I was running. On the ZALMAN, with the touch screen as the main window (that has the task bar) and as the secondary one, I still have no touch action. Others do have the same chassis as I do, and have got it working - Anyone else got a (fairly) recent ZALMAN hd160XT Plus and got this working please?

2008-02-21, 15:18	#77 (permalink)
dsilinski Portal User Join Date: Jan 2008 Posts: 2 Thanks: 0 Thanked 0 Times in 0 Posts Country:	I have a Zalman HD160Xt, not plus, and I got it working. The only thing I noticed was that I had to be a little more careful with the touchscreen. I had to hold my touch a little longer for it to work.

2008-02-27, 22:21	#79 (permalink)
My.stAr Portal User Join Date: Feb 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Country:	@Cybrmage: Thx for the nice plugin, also works with my case. (HD160XT rev.3) Just have one problem: when the plugin is enanbled, MP is always on top. How to change this? I need this because of another plugin "HD Player", here MP must be minimized, but it doesn't, instead it's... on top Thx in advance

2008-03-17, 18:25	#80 (permalink)
SChris Portal User Join Date: Jan 2008 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts	Hello, i also use the touchscreen plugin with my zalman 160XT. it works great, but after closing and restarting mp my touchscreen resolution changes automatically to 600x400. this happens only, when the touchscreen plugin is enabled