Zalman HD135 VFD (VlSys Mplay) - Page 28

OptimusPrime · 2008-02-08, 19:43

Hi Cybr,

you did it again :-)
Now the VU Meter 2 is working perfectly.
it's cool that the VU Meter 2 is displaying from the left and the right in to the middle.

Hi CybrMage,

it's me again. can you make it possible to config the plugin in it's basic funktions (e.g. VU Meter, Track Display)
in the e-home?
is's getting bored to config anything, close config,open mp, and so on.
i think the plugin has reached a point to get in the next level.

Senji064 · 2008-02-11, 13:59

Hello, i have this vfd. i install processplugin.dll, configure external display (COM3). But, when i launch mediaportal there is nothing on the screen. The Software of M Play Blast is still functionning. I must desactivate it? If, i do, my remote doesn't work. Please help.

Thanks. Good works Cybr.

Bagal · 2008-02-11, 14:57

This driver has been superceeded by Cybmage's new driver located here.

You need to disable the MPlay software, the driver has an option for this on the advanced setup screen and it does support the remote control but I believe this needs to be turned on in the advanced setup as well.

Senji064 · 2008-02-11, 19:41

Thanks, it works.

But when i disable mpc i can launch mediaportal with the remote. Somebody has a solution for me. Thanks.

And Very Good Work

OptimusPrime · 2008-02-11, 20:25

Hi Senji064,

you must enable autocontrol mhc.

Senji064 · 2008-02-13, 09:27

Thanks, it works.

I want to remplace "é" "è" "ê" by "e". I open the .xml. I write <Translate for>...</translate for> etc. But when i configure the plugin, it says there is an error in xml. Anybody has a quote?

OptimusPrime · 2008-02-14, 22:42

Hi Senji064,

which .xml did you edit?

Senji064 · 2008-02-15, 19:33

Quote:

Originally Posted by OptimusPrime

Hi Senji064,

which .xml did you edit?

I edit this : CybrDisplay_vlsys_mplay.xml

OptimusPrime · 2008-02-15, 22:00

Hi Senji064,

this is the wrong xml.
You must use the CybrDisplay.xml and type in the code below.

<TranslateFrom>
<string>é</string>
<string>è</string>
<string>ê</string>
</TranslateFrom>
<TranslateTo>
<string>e</string>
<string>e</string>
<string>e</string>
</TranslateTo>

Senji064 · 2008-02-17, 14:45

Quote:

Originally Posted by OptimusPrime

Hi Senji064,

this is the wrong xml.
You must use the CybrDisplay.xml and type in the code below.

<TranslateFrom>
<string>é</string>
<string>è</string>
<string>ê</string>
</TranslateFrom>
<TranslateTo>
<string>e</string>
<string>e</string>
<string>e</string>
</TranslateTo>

Thanks for your quick quote. I try this but it doesn't work. Any idea.

2008-02-08, 19:43	#271 (permalink)
OptimusPrime Portal Member Join Date: Nov 2007 Location: Ransbach Age: 31 Posts: 53 Thanks: 3 Thanked 0 Times in 0 Posts Country: My System	Hi Cybr, you did it again :-) Now the VU Meter 2 is working perfectly. it's cool that the VU Meter 2 is displaying from the left and the right in to the middle. Hi CybrMage, it's me again. can you make it possible to config the plugin in it's basic funktions (e.g. VU Meter, Track Display) in the e-home? is's getting bored to config anything, close config,open mp, and so on. i think the plugin has reached a point to get in the next level. __________________ Greez OptimusPrime Last edited by OptimusPrime; 2008-02-08 at 21:30. Reason: Automerged Doublepost

2008-02-11, 20:25	#275 (permalink)
OptimusPrime Portal Member Join Date: Nov 2007 Location: Ransbach Age: 31 Posts: 53 Thanks: 3 Thanked 0 Times in 0 Posts Country: My System	Hi Senji064, you must enable autocontrol mhc. __________________ Greez OptimusPrime

2008-02-14, 22:42	#277 (permalink)
OptimusPrime Portal Member Join Date: Nov 2007 Location: Ransbach Age: 31 Posts: 53 Thanks: 3 Thanked 0 Times in 0 Posts Country: My System	Hi Senji064, which .xml did you edit? __________________ Greez OptimusPrime

2008-02-15, 22:00	#279 (permalink)
OptimusPrime Portal Member Join Date: Nov 2007 Location: Ransbach Age: 31 Posts: 53 Thanks: 3 Thanked 0 Times in 0 Posts Country: My System	Hi Senji064, this is the wrong xml. You must use the CybrDisplay.xml and type in the code below. <TranslateFrom> <string>é</string> <string>è</string> <string>ê</string> </TranslateFrom> <TranslateTo> <string>e</string> <string>e</string> <string>e</string> </TranslateTo> __________________ Greez OptimusPrime

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2008-02-11, 13:59	#272 (permalink)
Senji064 Portal Member Join Date: Aug 2007 Age: 27 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Hello, i have this vfd. i install processplugin.dll, configure external display (COM3). But, when i launch mediaportal there is nothing on the screen. The Software of M Play Blast is still functionning. I must desactivate it? If, i do, my remote doesn't work. Please help. Thanks. Good works Cybr.

2008-02-11, 14:57	#273 (permalink)
Bagal MP Donator Join Date: Dec 2006 Age: 30 Posts: 138 Thanks: 11 Thanked 5 Times in 5 Posts Country:	This driver has been superceeded by Cybmage's new driver located here. You need to disable the MPlay software, the driver has an option for this on the advanced setup screen and it does support the remote control but I believe this needs to be turned on in the advanced setup as well.

2008-02-11, 19:41	#274 (permalink)
Senji064 Portal Member Join Date: Aug 2007 Age: 27 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Thanks, it works. But when i disable mpc i can launch mediaportal with the remote. Somebody has a solution for me. Thanks. And Very Good Work

2008-02-13, 09:27	#276 (permalink)
Senji064 Portal Member Join Date: Aug 2007 Age: 27 Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Country:	Thanks, it works. I want to remplace "é" "è" "ê" by "e". I open the .xml. I write <Translate for>...</translate for> etc. But when i configure the plugin, it says there is an error in xml. Anybody has a quote?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zalman VFD in PM	Takke	General Support	3	2008-01-04 13:20
Zalman HD160XT Gehäuse Diskusion	Muschi	Hardware	10	2007-12-29 18:18
Set-up Zalman HD160XT Remote	Giorgio_ap	Support	4	2007-07-05 12:44
Zalman HD160 advice	aarond	Hardware Selection Help	13	2007-01-12 09:06
Problems with Zalman HD160	steviweavi	HTPC Projects	6	2006-06-09 15:46